BOLD MAGENTA part numbers are new for 2027 AUDIO, COMMUNICATION & MOUNTS PARTSCANADA.COM HELMET & APPAREL | 2027 AUDIO, COMMUNICATION & MOUNTS 223 DESCRIPTION PART # Mini rail base for 3/8” - 5/8” dia. rails 0636-0059 Handlebar/rail base for 3/4” - 1” dia. rails 0636-0060 Handlebar/rail base for 1 1/8” - 1 1/2” dia. rails 0636-0061 MOUNT TORQUE™ HANDLEBAR/RAIL BASES WITH 1” DIAMETER B-SIZE BALL •Low-profile mounts are the perfect way to secure your personal electronics and small accessories in any high-vibration environment •Bases utilize nylon-insert locknuts to prevent loosening from vibration •Includes sizing inserts to provide a snug fit and rail protection 0636-0059 0636-0061 DESCRIPTION PART # Motorcycle brake/clutch reservoir base w/ 1” dia. B-size ball 0603-0891 MOTORCYCLE BRAKE/ CLUTCH RESERVOIR BASE WITH 1” DIAMETER B-SIZE BALL •Constructed of powder coated marine grade aluminum for added durability and strength in demanding conditions •Connects to handlebar clutch/brake on left or right side •Base fits control clamps on motorcycle with 40 mm x 6 mm stainless steel hardware, provided in kit •Hole centers on base have a minimum width of 0.94” and a maximum of 1.58” DESCRIPTION PART # Motorcycle brake/clutch reservoir base w/ 1” dia. B-size ball 0636-0058 MOUNT MOTORCYCLE BRAKE/CLUTCH RESERVOIR BASE WITH 1” DIAMETER B-SIZE BALL •Mounts electronic devices to your handlebar brake/clutch clamp • Holds two 1” diameter B-size mounting balls •Ball that is connected between hole centers is removable •Includes 40 mm x 6 mm stainless steel hardware NOTE: To see if this base will mount to your motorcycle, check hole spacing of base against your clutch/brake reservoir.The holes centers have a minimum width of 0.94” and a maximum of 1.58”. DESCRIPTION PART # Track Ball™ w/ T-Bolt attachment 0603-0828 TRACK BALL™ WITH T-BOLT ATTACHMENT • 1” diameter B-size rubber ball molded to a high-strength composite base • Rubber friction washer and a stainless steel T-Bolt for sliding into virtually any track system • Insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten in place; twist counterclockwise to loosen DESCRIPTION PART # Tough-Track™ top-loading composite 3” track 0603-0827 TOUGH-TRACK™ TOP-LOADING COMPOSITE 3”TRACK •High-strength composite •Can be drilled to any flat surface •Designed to use with #10 screws for easy installation, hardware not included •Works with a wide variety of RAM® track bases to attach cameras, fishing rods, phones, etc. • Dimensions: 4.75” L x 1.75” W • Track thickness 0.35”, inside track length 3” DESCRIPTION PART # Mount motorcycle fork stem base w/ 1” dia. B-size ball 0603-0457 X-Grip® mount w/ fork stem base 0603-0898 MOUNT MOTORCYCLE FORK STEM BASES WITH 1” DIAMETER B-SIZE BALL •Cleanest way to mount small electronics • PART #0603-0898 consists of a fork stem base, short length double-socket arm and X-Grip®; holder dimensions: 1.75” to 4.5”W, and a depth of 0.875” •Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit •Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 0.5” to 1.10” •Powdercoated marine-grade aluminum DESCRIPTION PART # Short 2” 0603-0467 Medium 3” 0603-0468 DESCRIPTION PART # Long 5.2” 0603-0469 DOUBLE-SOCKET ARMS •Marine-grade aluminum with a black powdercoated finish • Fits 1” diameter B-size rubber ball, bases and adapters DESCRIPTION PART # Double-socket arm w/ swivel 0603-0470 DOUBLE-SOCKET ARM WITH SWIVEL •High-strength composite • Consists of double 1” diameter B-size open-ball sockets with a 360° rotation point at the center and a connecting swivel joint that rotates forward and back 180° • The rubber ball and socket at each end, combined with a central pivot point, offer unparalleled adjustability •The double socket maximizes ball coverage for optimal fit • 5” overall length 0603-0468 0603-0457
RkJQdWJsaXNoZXIy NDI5NTY=