BOLD MAGENTA part numbers are new for 2027 AUDIO, COMMUNICATION & MOUNTS PARTSCANADA.COM HELMET & APPAREL | 2027 AUDIO, COMMUNICATION & MOUNTS 237 UNIVERSAL X-GRIP® CELL PHONE CRADLE WITH 1” DIAMETER B-SIZE BALL •High-strength composite and rustproof marine-grade stainless steel construction •Spring loaded holder expands and contracts for perfect fit on your device •Rubber-coated tips will hold device firm and stable • Includes 1” diameter B-size ball; mount adapter is not required •Versatility of holder allows for attachment to many RAM® arms • Cradle dimensions 1.875” to 3.25”W, 4.25” to 2.25 H, and a depth of 0.875” •It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size •X-Grip® includes a device tether •Made in the U.S.A. NOTE: It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. UNIVERSAL FINGER-GRIP™ CRADLE •This mount is designed to hold cell phones, two-way radios and GPS devices •Comes with three sets of four flexible rubber-coated fingers placed along the sides to grip your device •The fingers open by squeezing the ends of the holder •The bottom of the holder includes a back plate that adds support to the device being held by the mount •Can also be used with several other phone accessories, including Samsung and LG •The spine plate contains the universal AMPS and 1 1/2” x 2” hole patterns •Height dimensions: minimum with top and bottom plates is 5 1/4” and maximum with top and bottom plates is 6” •The top and bottom plates can be removed for larger devices •The fingers open by squeezing the ends of the holder • The spine plate contains the universal AMPS and 1.5” x 2” hole patterns • Spine plate dimensions: 3”W x 3” H •Height dimensions: minimum with top and bottom plates is 5.25” and maximum with top and bottom plates is 6.0” •Using short-arm side clamps: maximum depth is 0.75”, minimum width is 1.25” and maximum width is 3.0” • Using medium-arm side clamps: 1.5” to 3.5” W and maximum depth of 1.25 • Using long-arm side clamps: 2.25” to 3.5”W and maximum depth of 1.6” •Made in the U.S.A. NOTE: Does not come with ball mount adapter; use PART #0603-0472 to mount to RAM® double-socket arm. DESCRIPTION PART # X-Grip® cradle 0603-0478 DESCRIPTION PART # X-Grip replacement tether 0603-1093 DESCRIPTION PART # Universal Finger-Grip™ cradle 0603-0477 FINGER-GRIP™ UNIVERSAL GPS AND RADIO HOLDER •The Finger-Grip™ is a universal holder suited for rough environments that can accommodate a wide range of devices: GPS, handheld radios, phones, speakers, and more •Includes flexible rubber-coated fingers to provide a secure grip of your device; fingers open by squeezing the ends •Includes three (3) sets of four (4) rubber-coated fingers for different size devices as well as top and bottom optional device supports • Compatible with RAM mounts 1” B and 1.5” C-size diameter diamond ball bases for attaching to double socket arms and mounting bases •The back of the Finger-Grip contains multiple 4-hole AMPS hole patterns for connecting to any RAM components using the included set of nuts and bolts • Holder dimensions: 1.25” to 3.5”W x 7.25 H (using optional supports) with a max depth of 1.5” •Assembly hardware included DESCRIPTION PART # Finger-Grip™ universal GPS and radio holder 0636-0707 0603-1093 0603-0478
RkJQdWJsaXNoZXIy NDI5NTY=