BOLD MAGENTA part numbers are new for 2027 RIDER & SLED ACCESSORIES PARTSCANADA.COM SNOW | 2027 RIDER & SLED ACCESSORIES 149 RAM® LOCKING KNOB •Replaces the existing knob on the socket arm •Locks the arm firmly in place and gives added security DESCRIPTION PART # RAM® locking knob 0603-0495 DESCRIPTION PART # RAM® ball accessory base adapter for B-size socket arm 0636-0062 RAM® BALL ACCESSORY BASE ADAPTER FOR B-SIZE SOCKET ARM •The ideal accessory if you are looking to mount more than one device but cannot locate multiple mounting points on your motorcycle or vehicle •Connects another device to existing RAM® mount • Includes 1” diameter B-size ball connecting to a 1/4”-20 threaded stud with a length of 1.6” •Threads on this ball replace the bolt in any B-size socket arm, and the ball connects to middle of socket arm on the opposite side of the tightening knob NOTE: Socket arm assembly not included. DESCRIPTION PART # RAM® Tough-Ball™ base 0636-0065 RAM® MOUNT TOUGH-BALL™ BASE • Features 1” diameter B-size rubber ball connected to a 1/4”-20 x 0.25” male-threaded post •Male thread matches most standard camera and camcorder female threads found on the bottom of the camera DESCRIPTION PART # RAM® motorcycle brake/clutch reservoir base w/ 1” diameter B-size ball 0603-0891 RAM® MOTORCYCLE BRAKE/CLUTCH RESERVOIR BASE WITH 1” DIAMETER B-SIZE BALL •Powdercoated marine-grade aluminum • 1” diameter B-size rubber ball •Connects to handlebar clutch/brake on left or right side •Base fits control clamps on motorcycle with 40 mm x 6 mm stainless steel hardware provided in kit •Hole centers on base have a minimum width of 0.94” and a maximum of 1.58” DESCRIPTION PART # Fork stem w/ 1” ball 0603-0457 X-Grip® mount w/ fork stem base 0603-0898 RAM® MOUNT FORK STEM BASES •Cleanest way to mount small electronics •PART #0603-0898 consists of a fork stem base, short length double-socket arm and RAM® X-Grip®; holder dimensions: 1.75” to 4.5” W •Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit •Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 0.5” to 1.10” •Powdercoated marine-grade aluminum 0603-0457 DESCRIPTION PART # M10 x 1.25 base 0636-0063 DESCRIPTION PART # M10 x 1.5 base 0636-0064 RAM® MOUNT MALE-THREAD BASES WITH 1” BALL •Powdercoated marine-grade aluminum and rubber construction •Choice of M10 x 1.25 pitch or M10 x 1.50 pitch thread; both with 1” B-size rubber ball •PART #0636-0063 features M10 1.25 pitch male thread connected to a 1” rubber ball; the diameter of the round flange is 14.5 mm and the thread length is 10.15 mm •PART #0636-0064 features M10 x 1.5 pitch male thread connected to a 1” rubber ball; diameter of the round flange is 14.3 mm and the thread length is 10.5 mm 0636-0063 DESCRIPTION PART # RAM® Quick-Grip™ 15W waterproof wireless charging holder w/ 1” dia. B-size ball 0636-0687 RAM® QUICK-GRIP™ 15W WATERPROOF WIRELESS CHARGING HOLDER WITH BALL •Waterproof Qi wireless charging cradle with spring-loaded RAM® Quick-Grip™ design delivers up to 15W output •Compatible with RAM mounts B-size double socket arms and ball bases for versatile mounting options •Built tough with powder-coated marine-grade aluminum, stainless steel hardware, and high-strength composite • Holds devices 5.625” to 6.625” H, up to 3.125”W, and a depth of 0.7”
RkJQdWJsaXNoZXIy NDI5NTY=