BOLD MAGENTA part numbers are new for 2027 ELECTRICAL PARTSCANADA.COM SNOW | 2027 ELECTRICAL 385 DESCRIPTION PART # Solderless wire connectors 2120-0954 SOLDERLESS WIRE CONNECTORS •No soldering gun required •Low-heat solder melts with just a heat gun and shrinks the tubing for a watertight seal •Reclosable plastic box including 40-pieces red 22 to 18 AWG, 40-pieces blue 16 to 14 AWG, 10-pieces white 26 to 24 AWG and 10-pieces yellow 12 to 10 AWG DESCRIPTION PART # Universal starter relay 2110-0325 UNIVERSAL STARTER RELAY •Features a 12V solenoid • Includes starter relay, two metal brackets, three extra sets of terminal wires, three extra 30A blade-type fuses and five wires with terminals DESCRIPTION PART # Panel-mount tether-line kill switch 2106-0357 PANEL-MOUNT TETHER-LINE KILL SWITCH •Kills engine when rider falls off •Attaches easily •Wire measures 9.25” •Tether measures 51” •Bolt thread diameter: 10.5 mm •Normally closed DESCRIPTION PART # Universal kill switch 2106-0349 UNIVERSAL KILL SWITCH •OEM-type replacement kill switch designed to match stock units •Circuit open at normal position KILL SWITCH HOW TO ORDER NOTICE TO CUSTOMERS: There are two types of stop switches: (1) Normally Open, (NO) or (2) Normally Closed, (NC). Switches in this catalog are typically of the Normally Open (NO) type.They work by GROUNDING the primary ignition lead when activated. Note that they will not work on electrical systems requiring a Normally Closed (NC) switch, which works by OPENING the circuit when activated. NC switches are typically used on battery type ignitions, which may have an ignition key as an identifier. NC switches are generally found on newer machines. If in doubt, check your machine’s wiring schematic.
RkJQdWJsaXNoZXIy NDI5NTY=