MAY 2022 partscanada.com CYLINDER HEAD SERVICE KITS* • Everything needed to completely refresh/upgrade the cylinder head • Include lightweight racing valve spring kits with steel or titanium valve spring retainers, beehive or dual valve springs, steel base washers and Viton® valve stem seals • Black Diamond™ or White Diamond® stainless steel valves for increased longevity (valves are standard size) • C630 bronze or C674 Manganese (bronze) valve guides (standard size) • Top end gasket kit including base gaskets, engine case gaskets, exhaust gaskets, head gaskets and necessary O-rings and washers (as needed per application) FITS MODEL SPECIFICATIONS KIT CONTENTS PART # POLARIS Predator/Outlaw 500 03-07 Max valve lift (intake/exhaust) .440”, 1.375” installed height, 66 lb. seat pressure, 199 lb. open pressure 4 titanium valve spring retainers, 4 CrSi valve springs, Black Diamond™ valves (2 intake/ 2 exhaust), piston kit, top end gasket kit 0926-3401 Ranger 900 XP 14-19, RZR 900 15-22 Max valve lift (intake/exhaust) .435”, 1.360” installed height, 80 lb. seat pressure, 205 lb. open pressure 8 H.T. steel valve spring retainers, 8 CrSi valve springs (4 each intake/exhaust), Black Diamond™ valves (4 intake/4 exhaust), piston kit, top end gasket kit 0926-3402 RZR 1000 (including S, XP, Trail S) 15-22, RZR RS1 1822, General 1000 (including XP) 16-22 Max valve lift (intake/exhaust) .435”, 1.360” installed height, 80 lb. seat pressure, 205 lb. open pressure 8 H.T. steel valve spring retainers, 8 CrSi valve springs (4 each intake/exhaust), Black Diamond™ valves (4 intake/4 exhaust), piston kit, top end gasket kit 0926-3403 SUZUKI LT-R450 06-09 Max valve lift (intake/exhaust) .415”, 1.190” installed height (intake), 1.215” installed height (exhaust), 61 lb. seat pressure, 168 lb. open pressure (intake), 56 lb. seat pressure, 157 lb. open pressure (exhaust) 4 titanium valve spring retainers, 4 CrSi valve springs (2 intake/2 exhaust), 4 H.T. steel base washers, Black Diamond™ valves (2 intake/ 2 exhaust), top end gasket kit 0926-3398 YAMAHA YZF450 04-09 Max valve lift (intake/exhaust): .380”, installed height 1.105”, seat pressure 39 lb., open pressure 86 lb. 3 intake/2 exhaust titanium retainers, 3 intake/ 2 exhaust CrSi valve springs, 5 H.T. steel base washers, White Diamond® valves (3 intake/ 2 exhaust), 5 C630 valve guides, top end gasket kit and Viton® valve seals 0926-3399 YZF450R 09-20 Max valve lift (intake/exhaust): .380”, 1.105” installed height, seat pressure 39 lb., open pressure 86 lb. 3 intake/2 exhaust titanium retainers, 3 intake/ 2 exhaust CrSi valve springs, 5 H.T. steel base washers, White Diamond® valves (3 intake/ 2 exhaust), 5 C630 valve guides, top end gasket kit and Viton® valve seals 0926-3400 0926-3398 0926-3399 0926-3401 LOWDOWN STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 2 partscanada.com LIGHTWEIGHT RACING VALVE SPRING KITS* • Designed to outperform and outlast the factory valve springs • Kit features lightweight, high-strength CrSi valve springs, H.T. steel base washers and titanium spring retainers • Complete kit; everything you need to for a complete valve spring swap STREET BIKES FITS MODEL DESCRIPTION PART # KAWASAKI EX650R Ninja 650R 06-16 0.400” lift, installed height 1.215”, seat pressure 39 lb., open seat pressure 136 lb. 0926-3395 DIRT BIKES FITS MODEL DESCRIPTION PART # HONDA CRF250R/RX 18-21 Intake: 1.295” installed height, 70 lb. seat pressure, 209 lb. open pressure, 0.435” lift; Exhaust: 1.290” installed height, 60 lb. seat pressure, 162 lb. open pressure, 0.400” lift 0926-3377 KAWASAKI KX250F 20-21 Intake: 1.325” installed height, 60 lb. seat pressure, 204 lb. open pressure, 0.450” lift; Exhaust: 1.340” installed height, 50 lb. seat pressure, 165 lb. open pressure, 0.450” lift 0926-3385 BEEHIVE VALVE SPRING KIT* • Steel beehive valve spring kit with H.T. steel valve spring retainers • Beehive spring design reduces reciprocating mass while providing the spring forces necessary for high-performance, boosted race applications • Include H.T. steel retainers • Maximum intake valve lift is .470”, maximum exhaust valve lift is .405” • Intake installed height is 1.425” (61 lb. seat pressure, 196 lb. open seat pressure) • Exhaust installed height is 1.405” (67 lb. seat pressure, 196 lb. open pressure) • Sold as a kit • Made in the U.S.A. MOTORCYCLE FITS MODEL PART # HONDA CRF1000A/D 17-19 0926-3407 ATV/UTV FITS MODEL PART # HONDA Talon 1000X/R 19-21 0926-3407 STAINLESS STEEL CONVERSION VALVE AND SPRING KITS* • Stainless steel conversion kits include only what’s needed to convert your head to the long-life stainless steel Black Diamond™ or White Diamond® intake valves • Extends the life of the valvetrain and intake components by as much as 4x over the OEM titanium parts • Includes forged one-piece stainless steel intake valves, wound chrome-silicon heat-treated wire valve springs, ultra-light titanium retainers and hardened steel bases • Components are created using Finite Element Analysis (F.E.A.) software, as well as proprietary camshaft analysis and spring design software • Specifically designed and engineered for each application • Made in the U.S.A. FITS MODEL DESCRIPTION VALVE LIFT PART # HONDA CRF250R/ RX 18-21 Intake .435” 0926-3378 KAWASAKI KX250F 20-21 Intake .450” 0926-3386 0926-3407 0926-3378
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 3 partscanada.com CYLINDER STUD KITS • Studs are heat-treated 180,000 psi aircraft alloy steel • Nuts are machined from billet high-tensile steel and heat-treated • Both nut and stud have rolled threads for the strongest threads possible • Black oxide treated for corrosion resistance • Sold in kits • Made in the U.S.A. VALVES, VALVE GUIDES AND SPRINGS* • Tensilite® Titanium valves feature one-piece US-milled titanium alloy construction with a hard chromium nitride (CRN) shell; CRN offers excellent resistance to impact, abrasion and corrosion (Tensilite® valves are noted in the chart) • Black Diamond™ valves feature one-piece stainless steel construction with stellite tips and special impregnation to improve wear properties and reduce friction; all valves are Black Diamond™ unless otherwise noted in the chart • White Diamond® valves feature one-piece construction and hard chrome stems; White Diamond® valves are noted in the chart • All valves are compatible with OEM and KPMI® valve guides and spring kits • Valve guides are made of Ampco-45, a high-performance compound with 80% copper content to provide great heat conductivity and 5% nickel content for wear resistance (unless noted in chart) • Spring sets contain springs and titanium upper collars; lower collars included as required; spring kits are engineered for use with standard and oversized valves • Keepers are not included • Valves and guides are sold each; spring kits come complete for one motor • Made in the U.S.A. DIRT BIKE FITS MODEL PART # SUZUKI DR-Z400E/S/SM 00-19 2401-1561 STREET BIKES FITS MODEL DESCRIPTION SIZE PART # HONDA CRF1000A/D 17-19 White Diamond intake valve Std. 0926-3408 White Diamond intake valve Oversize (+1mm) 0926-3409 White Diamond Inconel exhaust valve Std. 0926-3410 White Diamond Inconel exhaust valve Oversize (+1mm) 0926-3411 C630 intake valve guide Std. 0926-3412 C630 exhaust valve guide Std. 0926-3413 KAWASAKI EX650R Ninja 650 06-16 C630 intake/exhaust valve guide Std. 0926-3396 C630 intake/exhaust valve guide Oversize (+.010”) 0926-3397 ATV FITS MODEL PART # SUZUKI LT-Z400 03-08 2401-1561 DIRT BIKES FITS MODEL DESCRIPTION SIZE PART # HONDA CRF250R/RX 18-21 Black Diamond intake valve Std. 0926-3379 Black Diamond exhaust valve Std. 0926-3380 C630 intake valve guide Std. 0926-3381 C630 intake valve guide Oversize (+.010”) 0926-3382 C630 exhaust valve guide Std. 0926-3383 C630 exhaust valve guide Oversize (+.010”) 0926-3384 KAWASAKI KX250F 20-21 White Diamond intake valve Std. 0926-3387 White Diamond exhaust valve Std. 0926-3388 Tensilite titanium intake valve Std. 0926-3389 Tensilite titanium exhaust valve Std. 0926-3390 C630 intake valve guide Std. 0926-3391 C630 intake valve guide Oversize (+.010”) 0926-3392 C630 exhaust valve guide Std. 0926-3393 C630 exhaust valve guide Oversize (+.010”) 0926-3394 ATV/UTV FITS MODEL DESCRIPTION SIZE PART # HONDA Pioneer 1000 16-21/ Talon 1000X/R 19-21 White Diamond intake valve Std. 0926-3408 White Diamond intake valve Oversize (+1mm) 0926-3409 White Diamond Inconel exhaust valve Std. 0926-3410 White Diamond Inconel exhaust valve Oversize (+1mm) 0926-3411 C630 intake valve guide Std. 0926-3412 C630 exhaust valve guide Std. 0926-3413 POLARIS Predator/ Outlaw 500 03-07 Valve spring kit (titanium retainers and CrSi valve springs) Std. 0926-3405 VALVE SEALS* FOR YAMAHA YZ450F 03-09, WR450F 03-15 • All valve seals are made of 100% solid Viton® for long life • Meet or exceed OEM specifications • When using Kibblewhite spring kits, Kibblewhite valve seals must be used because of spring clearances • Sold in 5-pack • Made in the U.S.A. DESCRIPTION PART # Valve seals 0926-3369
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 4 partscanada.com DESCRIPTION PART # Universal toggle on/off switch 0616-0155 UNIVERSAL TOGGLE ON/OFF SWITCH • Universal for both ATV and bikes • Switch can be used for almost any accessory • Switch specs: wire length 20”; width 22mm DESCRIPTION PART # Universal off-road switch 0616-0158 UNIVERSAL OFF-ROAD SWITCH • Has 9-pin connector • Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator • Switch Specs: 28.5mm wide housing, wire length is 21.5” DESCRIPTION PART # Tan M30050 Black 1861-0341 EXHAUST WRAP • Fiberglass cloth wrap available in black or tan • Stable at temperatures up to 2000°F • Insulates exhaust header pipes to protect you or your machine from intense heat • Generous size roll is enough to wrap one long header or critical areas on multiple exhausts; measures 2’ x 50’ • Made in the U.S.A. M30050 1861-0341 DESCRIPTION PART # Fiberglass muffler packing M701 FIBERGLASS MUFFLER PACKING • Repack blown-out silencers for more power and a quieter ride • Long filament fiberglass made especially for muffler packing • Measures 10.5” x 16”, more than enough to repack virtually any 2-stroke silencer • Resists breakdown up to 1200°F • Made in the U.S.A. DESCRIPTION PART # 1.6 bar (23 psi) 1903-0017 1.8 bar (26 psi) 1903-0018 2.1 bar (30 psi) 1903-0019 RADIATOR CAPS • Old and faulty radiator caps can cause steam and fluid to be pumped out of the radiator overflow hose • A replacement cap is the least expensive and easiest way to solve or troubleshoot your liquid cooled bike/ATV radiator problems • Upgrading to a high-pressure 1.6 bar, 1.8 bar or 2.1 bar from the stock radiator cap is the simplest and least expensive way to avoid over-boiling your engine • Raising your cooling system’s maximum operating pressure increases your coolant’s boiling point, allowing you to ride harder and longer • Black finished cap • Universal fit for most Japanese models along with 2016-to-current model fitments for all KTM/Husqvarna, and from 21-22 all Gas Gas fitments • High-temperature corrosion-resistant silicone seals 1903-0017 DIAMETER X LENGTH PART # .028” x 120’ M112-0028 DIAMETER X LENGTH PART # .032” x 75’ M112-0032 STAINLESS STEEL WIRE • Spooled on a convenient plastic casing • Spool perfect size for storage compartment or fanny pack • Available in two different diameters and lengths M112-0028
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 5 partscanada.com DESCRIPTION PART # Black 3505-0214 Mossy Oak Break-Up® 3505-0215 RIDGETOP REAR RACK BAGS • Rigid bag mounts easily to your ATV’s rear rack • Zipped top flap provides access to large storage compartment • High-density foam seat pad integrated into bag • Movable internal dividers, key clip and two zippered mesh pockets provide plenty of ways to store and protect cargo • External elastic cord secures riding apparel which provides quick access to gear DESCRIPTION PART # Black 3505-0212 Mossy Oak Break-Up® 3505-0213 OZARK REAR RACK BAGS • Rigid bag mounts easily to your ATV’s rear rack • Zipped top flap provides access to large storage compartment • High-density foam seat pad integrated into bag • Movable internal dividers, key clip and zippered mesh pockets provide plenty of ways to store cargo • External loop system allows you to easily strap additional cargo (bow, gun, shovels, etc.) to the bag • Four outside pockets, key clip and an elastic cord for securing riding apparel give you quick access to your gear • Internal mesh pockets, one with security zipper, help organize cargo • External mesh storage pockets allow easy access to favorites (drink bottle, tools, etc.) • The finest materials create a rugged, water-resistant fabric cast that resists the elements and cleans up easily with a damp cloth • 36” L x 19” W x 8” H SAFETY WARNING: Do not use as a seat while riding. • External shotgun shell holder (holds more than 15 shells) and a handy tool holder puts what you need at your fingertips • External mesh storage pockets permit easy access to favorites (drink bottle, tools, etc.) • The finest materials continue to create a rugged, water-resistant fabric case that resists the elements and cleans up easily with a damp cloth • 37” L x 19” W x 12” H SAFETY WARNING: Do not use as a seat while riding. 3505-0214 3505-0215 3505-0212 3505-0213
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 6 partscanada.com DELUXE FULL FOLDING WINDSHIELDS • Provides full windshield protection with the option to fold down the middle part of the windshield to allow for better airflow and/or visibility • It is designed to work with the OEM roof while not leaving a large gap between the top of the windshield and roof • The windshield is attached to the roll cage using four profile clamps • The middle section of the windshield is attached using three hinges with a unique fold to prevent water intrusion at the hinge line • The top of the folding part of the windshield is connected to the roll cage with two hook-and-loop straps • Made from .177” polycarbonate • Made in the U.S.A. FITS MODEL PART # OVERALL WIDTH OVERALL HEIGHT CAN-AM Commander, Commander Max 21-22 2317-0474 39.75” 32.25” Maverick Trail, Maverick Sport, Maverick Sport Max 18-22 2317-0474 39.75” 32.25” HONDA Pioneer 500, 520 16-22 2317-0475 41.00” 31.00” POLARIS RZR Trail and Trail S models w/ engines 900cc+ 21-22 2317-0476 39.00” 25.00” FULL WINDSHIELD FOR POLARIS RZR TRAIL/TRAIL S 900CC+ 21-22 • Premium .177” thick clear polycarbonate • Tool-less operation • Galvanized steel rubber-coated mount straps • 39” W X 25” L • Rubber seal helps keep elements out • Made in the U.S.A. NOTE: Not compatible with all roofs. REAR BACK PANEL FOR POLARIS RZR TRAIL/TRAIL S WITH ENGINES 900CC+ 21-22 • Made from .177” thick clear polycarbonate • Adds a finished look to your vehicle and provides an effective barrier to keep debris from entering the cab • 44” W x 39” H • Made in the U.S.A. ONE-PIECE ROOF FOR POLARIS RZR TRAIL/TRAIL S 900cc+ 21-22 • Durable polyethylene with UV stabilizers • Extremely durable in cold weather • Molded-in cargo tray allows for extra storage • Molded-in drains allow water to run off from storage area • 44” W x 26” L • Not compatible with all windshields • Must remove for trailering • Made in the U.S.A. PART # DESCRIPTION POLARIS 0521-1913 One-piece roof 2317-0476 DESCRIPTION PART # Full windshield 2317-0477 DESCRIPTION PART # Rear back panel 0521-1912
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 7 partscanada.com RC2 LEVERS • Features replaceable Delrin lever tips • Ergonomically refined on-the-fly position adjuster • Extensive CNC “surfacing” for blended lever ergonomics • Proprietary design, black-plated hardware • Machined from 6061-T6 billet aluminum • Laser-etched graphics • Available in shorty length • Made in the U.S.A. SHORTY LENGTH FITS MODEL COLOUR CLUTCH BRAKE BMW R9T/R9T Pure/R9T Scrambler 16-20 Black 0613-1987 0614-1761 Red 0613-1988 0614-1762 R9TR9T Racer/R9T Urban G/S 16-19 Black 0613-1987 0614-1761 Red 0613-1988 0614-1762 0613-1988 2022 KAWASKI KLR 650 RS-2 RACE SERIES SLIP-ON • Diamond-shaped muffler sleeve • Large muffle core and increased muffler packing for quieter operation • Stainless steel cone end cap • A massive weight loss of 7.1 Lbs. the KLR not only has more useable power it handles much better with the removal of all the weight out back. • Our R&D team was able to gain power across the entire spectrum, boosting the peak horsepower by 7.1% while the peak torque was upped by 5.9%! • RS-2 for the KLR comes with a USFS approved spark arrestor installed DESCRIPTION PART # 2022 Kawasaki KLR 650 RS-2 Series Race Slip-on 1811-4299 REPLACEMENT HIGH-FLOW AIR FILTER™ FOR BMW R NINET/PURE/RACER/SCRAMBLER/ URBAN GS 20-22 (f/20 R NINET/PURE/RACER/ SCRAMBLER OEM #13728406673) • Designed to provide increased performance • Pleated media provides a large filtration area offering long service intervals • Multi-layers of woven cotton gauze media offer excellent filtration • Fits directly into OEM airbox with application specific Sealing Bead to ensure a precise fit • Fuel-management modifications are not required for increased performance • Washable and reusable, pre-oiled and ready to ride • Made in the U.S.A. for over 50 years DESCRIPTION PART # Replacement High-Flow Air Filter 1011-4584 HEATED SEAT KIT • Add this seat warmer under your OEM seat cover for a comfortable ride all season long • Stretchable neoprene base material is water-resistant and extremely pliable • Waterproof connectors for an all-weather installation • Measures 25” L, 14” W in the back tapering to 9” W in the front • Includes wiring, switch, relay, and complete instructions • Hi/Low switch for adjustable temperature settings DESCRIPTION PART # Heated seat kit 0821-3477
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 8 partscanada.com PACKTALK EDGE • Dynamic Mesh – Featuring our 2nd generation Dynamic Mesh Communication (DMC) with unparalleled intercom sound quality, easy pairing, and robust performance. For up to 15 riders at a range of 1.6km. • Operated by Natural Voice – Our improved Natural Voice Operation engine rides you from the need to ever press a button again. Just say “hey Cardo” and tell it what you want, your PACKTALK EDGE will do the rest. • Universal Bluetooth Connectivity – PACKTALK EDGE connects with any other Bluetooth intercom system of any brand. • Waterproof – No matter what you throw at it, your waterproof PACKTALK EDGE will take the beating and keep you connected, Rain, shine, mud, dust or snow. • Over the Air Software Updates – Keeping your unit up-to-date has never been so easy. Use your Cardo Connect App to download and install latest software directly to your PACKTALK EDGE. No cable needed. • Sound By JBL – Powerful 40mm high-definition speakers engineered to perfection by JBL experts, with an improved music processor and three redesigned audio profiles. • Air Mount – Just bring your PACKTALK EDGE near the magnetic mount and it will snap on. Simple, Easy and Secure. DESCRIPTION PART # Packtalk Edge Single Unit 4402-0939 Packtalk Edge Dual Pack 4402-0940 Packtalk Edge 2nd Helmet Kit 4402-0936 Packtalk Edge Half Helmet Kit 4402-0938
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 9 partscanada.com DESCRIPTION PART # Tubeless puncture pilot kit 0363-0055 TUBELESS PUNCTURE PILOT KIT • Ideal for motorcycles, scooters, mowers, small tractors, golf carts and ATVs • Kit allows you to make an on-the-wheel repair to your tubeless tire and re-inflate it on the spot • Includes the Pocket Tire Plugger with 15 mushroom-shaped rubber plugs and the compact mini air compressor • Mushroom plugs measure 5/16” diameter shaft x 3/4” in length and work on all tubeless tires • Kit fits into a durable, zippered canvas case that measures only 7” x 4” x 3” and weighs just 1.7 lb. • 12V compressor unit features built-in gauge and LED light, 66” power cord that fits Battery Tender connectors, 12” alligator extension clips, 36” extension lighter adapter and 4” tire valve hose with sports needle and inflatable adapter DESCRIPTION PART # CO2 kit SG1066 DESCRIPTION PART # Patch/plugs (6-pk.) and rubber cement 3002 DESCRIPTION PART # Tire patches (6-pk.) and rubber cement 3003 CO2 TUBE/TUBELESS TIRE REPAIR KIT • Immediate roadside repair and reinflation of a punctured tire • Kit contains three 11/4” round patches, two 2” round patches, one 15/8” x 3” oblong patch, five 41/2” reinforced string plugs, plus four CO2 canisters and adapter for immediate inflation; also includes rubber cement, repair tools, valve cap, replacement core, hand cleaner and towel in a zippered vinyl pouch • Replacement parts also available NOTE: CO2 cartridges cannot be transported on an aircraft. DESCRIPTION PART # Tubeless tire plugger 1075 TUBELESS TIRE PLUGGER • On-the-wheel repair for all tubeless tires • Gun inserts a natural rubber plug into the puncture area that expands under pressure to seal the hole • Mushroom-shaped head seats on the inner wall • Includes plug gun, nozzle and probe tool, retractable razor knife, reaming tool, 25 mushroom plugs, instructions and 9” x 6” zippered pouch SG1066 DESCRIPTION PART # Mini air compressor 0363-0040 MINI AIR COMPRESSOR • Portable 12V compressor measures only 4” x 2” x 6” and weighs just 14 oz. • Features a built-in LED light and 0-120 psi gauge • 4” tire valve hose; 66” power cord • 12” extension alligator clips; 36” extension lighter adapter • Includes sports needle adapter, inflatable adapter, complete instructions and rugged zippered carry case
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 10 partscanada.com SHIFT LEVERS PART # DESCRIPTION FOR 18-21 SOFTAIL MODELS W/ MID CONTROLS 1602-1414 Black 1602-1415 Chrome FOR 99-21 TOURING, 08-21 TRIKES AND 00-17 SOFTAIL MODELS 1602-1416 Black 1602-1417 Chrome PART # DESCRIPTION FOR 99-21 TOURING, 08-21 TRIKES AND 00-17 SOFTAIL MODELS (CONT) 1602-1418 Black, 1” shorter 1602-1419 Chrome, 1” shorter FOR 99-17 DYNA MODELS W/ MID CONTROLS 1602-1412 Black 1602-1413 Chrome SHIFT LINKAGE PART # DESCRIPTION FOR 99-21 TOURING MODELS AND SOFTAIL/ DYNA MODELS W/ FORWARD CONTROLS 1601-0545 Black 1601-0546 Chrome FOR ALL DYNA AND SOFTAIL MODELS W/ MID CONTROLS 1601-0543 Black 1601-0544 Chrome SHIFT LEVERS AND LINKAGE • Shift levers can be paired with any TSC shifter tips • Linkage allows rider to easily adjust the lever to the ideal height without removing the linkage • ARP® hardware included • Made in the U.S.A. 1601-0546 1601-0545 1602-1414 1602-1417 T-GP PLUS R V3 AIR JACKET SPORT RIDING • Chassis constructed from hard wearing 600 Denier polyester with double polyurethane coating for additional protection. • Large mesh panel on front, back and upper sleeves for optimized levels of airflow. • Level 1 Nucleon Flex Plus armor on shoulder and elbow (Nucleon chest Level 1 and Nucleon Level 1 and 2 back protectors available as an accessory upgrade). • GP Lite shoulder protectors with dynamic friction shield on shoulder for enhanced abrasion resistance. • 600 Denier polyester internal reinforcement on shoulders and elbows for additional abrasion resistance. • Large stretch panel on shoulder and underarm for an optimized fit and performance. • Hook and loop waist and cuff with semiautomatic zip for a secure closure. • Low profile collar construction with soft lining for enhanced rider comfort. • Two front zippered pockets, inner waterproof document pocket and two inner pockets on the liner for safe and secure storage. • Upper side vents for optimal airflow. • Reflective details. • According to European statutory law the CE mark is a conformity requirement for the marketing of this product. • The following standards apply to this product: - CE Category II PPE Regulation (EU) 2016/425 – A class. - CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector, available as an accessory upgrade. - CE Level 1 EN1621-1:2012 Alpinestars Nucleon Flex Plus shoulder and elbow protectors 1.5 mm 90.° 86. ° 87.° SIZE (A) BLACK CAMO RED FLUO (B) BLACK DARK GREY WHITE BLACK BLACK BLACK RED WHITE S 2820-5261 2820-5254 2820-5247 2820-5268 M 2820-5262 2820-5255 2820-5248 2820-5269 L 2820-5263 2820-5256 2820-5249 2820-5270 XL 2820-5264 2820-5257 2820-5250 2820-5271 2X 2820-5265 2820-5258 2820-5251 2820-5272 3X 2820-5266 2820-5259 2820-5252 — 4X — — 2820-5253 —
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 11 partscanada.com RENTHAL LIMITED EDITION PURPLE RETRO HANDLEBARS FATBAR / OFFROAD / TWINWALL FATBAR™ HANDLEBARS • 7010-T6 aluminum alloy, braceless design to reduce weight while maintaining an extremely high strength • The braceless design allows for a comfortable level of flexibility • 11/8” clamping area reduces slippage • Laser-etched positioning grid; knurled clutch side bar end prevents grip slippage • Shot-peened, anodized finish resists corrosion • Each handlebar includes an updated injection-molded foam bar pad for better protection and greater durability • Require 11/8” bar mounts for bikes originally equipped with 7/8” bars OFF-ROAD HANDLEBARS • Exclusive aerospace aluminum alloy is precisely the best combination of strength and fatigue reduction • Oversized tube is machined down to 7/8” to ensure a perfect diameter and prevent the handlebar from slipping in the clamps • Shot-peened finish for improved fatigue life • Laser-marked positioning grid • Exclusive, copyrighted lightweight clamping system for the cross brace; bolted and bonded to increase strength • Each handlebar includes an updated injection-molded foam bar pad for better protection and greater durability TWINWALL® HANDLEBARS • Twinwall® construction consists of two aluminum alloy tubes, one within the other • Outer tube is 7010-T73 aluminum, which has extreme resistance to mechanical damage and is anodized to prevent corrosion • Inner tube is ultra-high-strength 7010-T6 aluminum and is hard anodized to resist wear from twist grip and controls • Rubber seals are used to cover the ends of the outer tube to keep water and cleaning fluids out • Laser marked in the middle for accurate positioning • Available with anodized finish in your favorite racer’s bend • Each handlebar includes an updated injection-molded foam bar pad for better protection and greater durability • Require 11/8” bar mounts for bikes originally equipped with 7/8” bars DESCRIPTION RENTHAL BEND PART # COLOUR Fatbar 604 0601-5710 Purple Fatbar 609 0601-5711 Purple Fatbar 821 0601-5713 Purple Fatbar 827 0601-5714 Purple Offroad 809 0601-5712 Purple Offroad 966 0601-5715 Purple Offroad 971 0601-5716 Purple Twinwall 966 0601-5717 Purple Twinwall 997 0601-5718 Purple Twinwall 999 0601-5719 Purple Fatbar Bar Pad 0601-5721 Purple/Day Glo Yellow Offroad/Twinwall Bar Pad 0601-5720 Purple/Day Glo Yellow FATBAR OFFROAD TWINWALL OFFROAD/TWINWALL FATBAR
RkJQdWJsaXNoZXIy NDI5NTY=