JUNE 2022 partscanada.com CORE MANUAL TORQDRIVE® CLUTCH KIT FOR HONDA CRF450X 05-18 • The Core Manual TorqDrive clutch delivers unprecedented performance, tuning and durability • TorqDrive provides more disks in less space, allowing up to four additional friction disks over stock • More frictions = more torque capacity, thus unlocking the full power of your engine without the need to add stiffer pressure plate springs • Provides more consistent clutch lever feel and behavior • Can be set up to maintain a stock, or lighter than stock, lever pull depending on engine tuning • Rekluse sleeves eliminate basket wear and notching • Proven in racing at the highest levels • Made in the U.S.A. TORQDRIVE® CLUTCH PACK FOR BETA • A high-performance manual clutch is now more accessible than ever with the TorqDrive Clutch Pack • It’s as easy as changing your clutch plates into your OEM components • Proven at the highest levels of racing, TorqDrive thin friction disk technology allows more disks to fit in your OEM clutch’s footprint, decreasing slip and unlocking the full power of your engine • TorqDrive Technology also provides increased clutch life and decreased clutch fade • The additional friction disks provide an average of a 25% gain in torque capacity over stock, while reducing lever pull by an average of 10% (figures vary by model) • TorqDrive delivers stronger drive throughout the powerband, unlocking the bike’s power without any expensive motor mods • Rekluse basket sleeves eliminate basket wear and notching • Made in the U.S.A. NOTE: Not a replacement clutch pack for RadiusX, RadiusCX or Core Manual TorqDrive. FITS MODEL PART # RR 250/300/Race Edition 22, RX 300 22, XTrainer 300 22 1131-3734 RR 350/390/430/480 Race Edition 22 1131-3734 RR-S 350/390/430/500 22 1131-3734 CLUTCH PACK FOR CORE MANUAL TORQDRIVE® CLUTCH FOR HONDA CRF450R 21 • Replacement clutch pack for Rekluse Core Manual TorqDrive clutch only • Includes: TorqDrive friction disks, steel drive plates and basket sleeves • Not compatible with OEM or any other aftermarket clutch system DESCRIPTION PART # Core Manual Torqdrive® Clutch Kit 1130-0653 DESCRIPTION PART # Clutch Pack for Core Manual Torqdrive® Clutch 1131-3726 LOWDOWN STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 2 partscanada.com REAR RADIUS ROD PLATES • Replace the thin OEM stock radius rod plate • This plate takes a lot of stress – replace it with this 5/8" thick billet machined plate • No more flex and you will never have to worry about it breaking or bending • Installs just like the stock unit, no modifications necessary FITS MODEL PART # CAN-AM Maverick X3 (all models) 17-21 1302-0691 POLARIS RZR 1000 XP 14-17 1302-0689 RZR-4 1000 XP 14-17 1302-0689 RZR 1000 XP High Lifter 17 1302-0690 RZR-4 1000 XP High Lifter 17 1302-0690 RZR 1000 XP 18-21 1302-0690 RZR-4 1000 XP 18-21 1302-0690 RZR RS1 18-21 1302-0690 RZR Turbo 16 1302-0689 RZR Turbo-4 16 1302-0689 RZR Turbo (all models) 17-21 1302-0690 RZR Turbo-4 (all models) 17-21 1302-0690 FRONT STRUT FOR POLARIS • Direct replacement front gas strut • Comparable to OEM in compression and rebound • Offers a plush ride in all conditions • Includes the top cap and mounting nut • Features chrome plated steel shafts, high-quality seals and an anticorrosive powdercoat finish • For use with the stock suspension springs • Sold each FITS MODEL PART # 250 2x4/4x4 93 1311-0160 Trailblazer 250 90-95 1311-0160 Trailblazer 250 00-02 1311-0161 Trail Boss 250 89-99 1311-0160 300 2x4/4x4 94-95 1311-0160 Magnum 325 00-02 1311-0161 Trail Boss 325/330 00-08 1311-0161 Xpedition 325/425 00-02 1311-0161 ATP 330/500 04-05 1311-0161 Magnum 330 03-06 1311-0161 Sportsman 335 99-00 1311-0161 350L 93 1311-0160 Trail Boss 350L 90-92 1311-0160 400L 94-95 1311-0160 Sport 400 94-95 1311-0160 Sportsman 400L 93-94 1311-0160 Sportsman 400 01-04 1311-0161 Xplorer 400 00-02 1311-0161 Diesel 455 99-01 1311-0161 Big Boss 6x6 89-92 1311-0160 Magnum 500 99-03 1311-0161 Sportsman 500 99-04 1311-0161 Sportsman 600 03-04 1311-0161 Sportsman 700 02-04 1311-0161 HOT SHOT SERIES REGULATOR/RECTIFIER FOR POLARIS • Replacement-style regulator/rectifier • Made in the U.S.A. FITS MODEL PART # Ranger 500 17-21 2112-1628 570 Ranger/Crew (all models) 16-21 2112-1628 570 RZR (all models) 12, 17-21 2112-1628 Ranger 900 Crew 17-19 2112-1628 Ranger 900 EPS 17-18 2112-1628 Ranger 900 XP 16-19 2112-1628 RZR 4 900 14-18 2112-1628 RZR 4 900 EPS 15-16 2112-1628 RZR 4 900 XP 12-13, 15 2112-1628 RZR 900/S 14-21 2112-1628 RZR 900 Tractor 17-18 2112-1628 General 1000/4P (all models) 17-21 2112-1628 Ranger 1000 Crew/XP 17-21 2112-1628 Ranger 1000 Tractor 21 2112-1628 RZR 1000/XP/EPS/Turbo 14-20 2112-1628 RZR 1000 RS1 19-20 2112-1628 RZR 1000 S (all models) 17-20 2112-1628 RZR 1000 XP Tractor 17-18 2112-1628 RZR 4 1000 XP/Turbo EPS 14-20 2112-1628 UNIVERSAL HORN • Universal for street and off-road use • Snail-type, “E” marked • 6V version is 2.75” in diameter and comes in black • Emits a loud 105 to 118 dB signal • Wire extension included FUEL INJECTOR CLEANER • For use with all Motion Pro fuel injector cleaner kits • Effectively removes deposits on fuel injectors • Safe for all gasoline engines (foreign and domestic) • Clean fuel injectors improve gas mileage and reduce exhaust emissions • Will not harm O-rings or moving parts of injector • Available in 8 oz. cans 1302-0689 1302-0691 DESCRIPTION PART # Universal Horn 2107-0319 DESCRIPTION PART # Fuel Injector Cleaner 3704-0389
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 3 partscanada.com MX GRAPHIC KITS • UFO plast presents the new collection of graphics dedicated to the World of motocross. • Our MX Graphic Kits are digitally printed (with UV resistant inks) of the highest quality, on material with high adhesion HI-tack glue with • Protective lamination (crystal) with high thickness specially designed to protect the graphics from scratches. PART # DESCRIPTION 1403-3698 UFO BODY AND GRAPHICS KIT APO BLK 4302-6712 UFO GRAPHICS KIT APO BLK REPLICA PLASTIC KIT GRAPHIC KIT GASGAS COMBO KIT - APODIS MC-F 450/MC-F 250 2021-2022 / MC-F 350 2022 / MC 250 2022 / MC 125 2021-2022 PART # DESCRIPTION 1403-3699 UFO BODY AND GRAPHICS KIT STK WHT 4302-6713 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT GASGAS COMBO KIT - STOKES MC-F 450 / MC-F 250 2021-2022 / MC-F 350 2022 / MC 250 2022 / MC 125 2021-2022 PART # DESCRIPTION 1403-3700 UFO BODY AND GRAPHICS KIT APO WHT 4302-6714 UFO GRAPHICS KIT APO WHT REPLICA PLASTIC KIT GRAPHIC KIT HONDA COMBO KIT - APODIS CRF 450R 2021-2022 CRF 250R 2022 PART # DESCRIPTION 1403-3702 UFO BODY AND GRAPHICS KIT STK WHT 4302-6716 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT HONDA COMBO KIT - STOKES CRF 450R 2021-2022 CRF 250R 202
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 4 partscanada.com MX GRAPHIC KITS • UFO plast presents the new collection of graphics dedicated to the World of motocross. • Our MX Graphic Kits are digitally printed (with UV resistant inks) of the highest quality, on material with high adhesion HI-tack glue with • Protective lamination (crystal) with high thickness specially designed to protect the graphics from scratches. PART # DESCRIPTION 1403-3703 UFO BODY AND GRAPHICS KIT TEC WHT 4302-6717 UFO GRAPHICS KIT TEC WHT REPLICA PLASTIC KIT GRAPHIC KIT HONDA COMBO KIT - TECNA CRF 450R 2021-2022 CRF 250R 2022 PART # DESCRIPTION 1403-3701 UFO BODY AND GRAPHICS KIT STAR BLK 4302-6715 UFO GRAPHICS KIT STAR BLK REPLICA PLASTIC KIT GRAPHIC KIT HONDA COMBO KIT - STARDUST CRF 450R 2021-2022 CRF 250R 2022 PART # DESCRIPTION 1403-3704 UFO BODY AND GRAPHICS KIT APO BLU 4302-6718 UFO GRAPHICS KIT APO BLU REPLICA PLASTIC KIT GRAPHIC KIT HUSQVARNA COMBO KIT - APODIS FC 450 / FC 350 / FC 250 - 2019-2022 TC 250 / TC 125 - 2019-2022 PART # DESCRIPTION 1403-3706 UFO BODY AND GRAPHICS KIT STK WHT 4302-6720 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT HUSQVARNA COMBO KIT - STOKES FC 450 / FC 350 / FC 250 - 2019-2022 TC 250 / TC 125 - 2019-2022
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 5 partscanada.com MX GRAPHIC KITS • UFO plast presents the new collection of graphics dedicated to the World of motocross. • Our MX Graphic Kits are digitally printed (with UV resistant inks) of the highest quality, on material with high adhesion HI-tack glue with • Protective lamination (crystal) with high thickness specially designed to protect the graphics from scratches. PART # DESCRIPTION 1403-3709 UFO BODY AND GRAPHICS KIT STK WHT 4302-6723 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT KAWASAKI COMBO KIT - STOKES KXF 450 2019-2022 KXF 250 2021-2022 PART # DESCRIPTION 1403-3705 UFO BODY AND GRAPHICS KIT STAR BLU 4302-6719 UFO GRAPHICS KIT STAR BLU REPLICA PLASTIC KIT GRAPHIC KIT HUSQVARNA COMBO KIT - STARDUST FC 450 / FC 350 / FC 250 - 2019-2022 TC 250 / TC 125 - 2019-2022 PART # DESCRIPTION 1403-3707 UFO BODY AND GRAPHICS KIT APO OEM 4302-6721 UFO GRAPHICS KIT APO OEM REPLICA PLASTIC KIT GRAPHIC KIT KAWASAKI COMBO KIT - APODIS KXF 450 2019-2022 KXF 250 2021-2022 PART # DESCRIPTION 1403-3708 UFO BODY AND GRAPHICS KIT STK BLK 4302-6722 UFO GRAPHICS KIT STK BLK REPLICA PLASTIC KIT GRAPHIC KIT KAWASAKI COMBO KIT - STOKES KXF 450 2019-2022 KXF 250 2021-2022
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 6 partscanada.com MX GRAPHIC KITS • UFO plast presents the new collection of graphics dedicated to the World of motocross. • Our MX Graphic Kits are digitally printed (with UV resistant inks) of the highest quality, on material with high adhesion HI-tack glue with • Protective lamination (crystal) with high thickness specially designed to protect the graphics from scratches. PART # DESCRIPTION 1403-3711 UFO BODY AND GRAPHICS KIT STK ORG 4302-6725 UFO GRAPHICS KIT STK ORG REPLICA PLASTIC KIT GRAPHIC KIT KTM COMBO KIT - STOKES SX-F 250 / SX-F 350 / SX-F 450 - 2019-2022 SX 125 / SX 150 / SX 250 - 2019-2022 PART # DESCRIPTION 1403-3712 UFO BODY AND GRAPHICS KIT STK WHT 4302-6726 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT KTM COMBO KIT - STOKES SX-F 250 / SX-F 350 / SX-F 450 - 2019-2022 SX 125 / SX 150 / SX 250 - 2019-2022 PART # DESCRIPTION 1403-3713 UFO BODY AND GRAPHICS KIT TEC OEM 4302-6727 UFO GRAPHICS KIT TEC OEM REPLICA PLASTIC KIT GRAPHIC KIT KTM COMBO KIT - TECNA SX-F 250 / SX-F 350 / SX-F 450 - 2019-2022 SX 125 / SX 150 / SX 250 - 2019-2022 PART # DESCRIPTION 1403-3710 UFO BODY AND GRAPHICS KIT APO OEM 4302-6724 UFO GRAPHICS KIT APO OEM REPLICA PLASTIC KIT GRAPHIC KIT KTM COMBO KIT - APODIS SX-F 250 / SX-F 350 / SX-F 450 - 2019-2022 SX 125 / SX 150 / SX 250 - 2019-2022
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 7 partscanada.com MX GRAPHIC KITS • UFO plast presents the new collection of graphics dedicated to the World of motocross. • Our MX Graphic Kits are digitally printed (with UV resistant inks) of the highest quality, on material with high adhesion HI-tack glue with • Protective lamination (crystal) with high thickness specially designed to protect the graphics from scratches. PART # DESCRIPTION 1403-3714 UFO BODY AND GRAPHICS KIT APO OEM 4302-6728 UFO GRAPHICS KIT APO OEM REPLICA PLASTIC KIT GRAPHIC KIT SUZUKI COMBO KIT - APODIS RMZ 450 2018-2022 RMZ 250 2019-2022 PART # DESCRIPTION 1403-3715 UFO BODY AND GRAPHICS KIT STK WHT 4302-6729 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT SUZUKI COMBO KIT - STOKES RMZ 450 2018-2022 RMZ 250 2019-2022 PART # DESCRIPTION 1403-3719 UFO BODY AND GRAPHICS KIT STK GRY 4302-6733 UFO GRAPHICS KIT STK GRY REPLICA PLASTIC KIT GRAPHIC KIT YAMAHA COMBO KIT - STOKES YZF 450 2018-2022 YZF 250 2019-2022 PART # DESCRIPTION 1403-3720 UFO BODY AND GRAPHICS KIT STK WHT 4302-6735 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT YAMAHA COMBO KIT - STOKES YZF 450 2018-2022 YZF 250 2019-2022
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 8 partscanada.com MX GRAPHIC KITS • UFO plast presents the new collection of graphics dedicated to the World of motocross. • Our MX Graphic Kits are digitally printed (with UV resistant inks) of the highest quality, on material with high adhesion HI-tack glue with • Protective lamination (crystal) with high thickness specially designed to protect the graphics from scratches. PART # DESCRIPTION 1403-3718 UFO BODY AND GRAPHICS KIT STAR BLU 4302-6732 UFO GRAPHICS KIT STAR BLU REPLICA PLASTIC KIT GRAPHIC KIT PART # DESCRIPTION 1403-3716 UFO BODY AND GRAPHICS KIT APO BLU 4302-6730 UFO GRAPHICS KIT APO BLU REPLICA PLASTIC KIT GRAPHIC KIT YAMAHA COMBO KIT - APODIS YZF 450 2018-2022 YZF 250 2019-2022 PART # DESCRIPTION 1403-3717 UFO BODY AND GRAPHICS KIT APO OEM 4302-6731 UFO GRAPHICS KIT APO OEM REPLICA PLASTIC KIT GRAPHIC KIT YAMAHA COMBO KIT - APODIS YZ 250 2022-2022 YZ 125 2022-2022 PART # DESCRIPTION 1403-3721 UFO BODY AND GRAPHICS KIT STK WHT 4302-6734 UFO GRAPHICS KIT STK WHT REPLICA PLASTIC KIT GRAPHIC KIT YAMAHA COMBO KIT - STOKES YZ 250 2022-2022 YZ 125 2022-2022 YAMAHA COMBO KIT - STARDUST YZF 450 2018-2022 YZF 250 2019-2022
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 9 partscanada.com FRONT LOWER COWLS FOR HONDA GL1800 GOLD WING 01-17/ GL1800 VALKYRIE 14-16 • Chrome-plated ABS replacement for the gray plastic OEM cowls • Designed to work with OEM and Big Bike Parts lower fog lights PART #DS282118 • Mount with OEM hardware DESCRIPTION PART # For round fog lights BB-52-608 For rectangular fog lights, chrome 0521-1419 0521-1419 0521-1551 PLASTIC RIVETS FOR HONDA GL1800 GOLD WING 01-17/ F6B 13-16/GL1800 VALKYRIE 14-16 • Reusable plastic rivets for Gold Wing fairings • Sold in 10-pack DESCRIPTION PART # Standard 2402-0084 Flush, also for Honda GL1800 Gold Wing 01-21 2402-0149 2402-0084 2402-0149 FITS MODEL DIMENSIONS PART # CAN-AM Spyder RS/RT/ST/F3 11-19 41/2” L x 2” W 1611-0065 FULL SIZE BRAKE PEDALS • Full Size Brake Pedal replaces the OEM brake pedal cover • Mounts the same as the existing OEM brake pedal cover with a rustproof steel channel reinforcing the high-density rubber pad • This larger brake pedal cover allows a more comfortable use of the brake pedal without the foot constantly falling off • Unique design complements the Spyder styling FULL SIZE BRAKE PEDAL FOR CAN-AM RYKER 19-21 • Slides over the OEM unfinished brake pedal with a large 41/4” L x 2” W rubber pedal cover • Underlying metal tubing is embedded into the custom patterned rubber and secured with two setscrews ensuring it will not come loose • Allows more comfortable use of the brake pedal • Unique rubber design complements the Ryker styling DESCRIPTION PART # Full Size Brake Pedal 1611-0096
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 10 partscanada.com SHORT SPIRAL ANTENNA FOR CAN-AM SPYDER RT 10-20, VICTORY CROSS COUNTRY/TOUR/MAGNUM 10-17, YAMAHA VENTURE/ELUDER 18 • Great replacement for the long, stock OEM whip style antennas • Easy-to-install, direct replacement • Features grommet that remains in place and completes the installation process • Includes a removable M6-1.0 threaded screw to mount on any model • Measures 71/2” tall PART # DESCRIPTION 4401-0214 Short Spiral Antenna 2-PORT USB AUXILIARY SOCKET FOR HONDA GL1800 GOLD WING 18-21 • For use in charging or using MP3, GPS, iPhones® and other devices • Features two 2.1 amp USB power plugs with a protective cap • Custom wire harness allows plug ‘n play installation • Drilling required for installation PART # DESCRIPTION 4401-0221 2-Port USB Auxiliary Socket FAIRING GROMMETS • Inexpensive alternative to OEM grommets • Used on most fairings • Sold in sets of five: two large, two small and one slotted PART # DESCRIPTION BB52691 Fairing Grommets COLOUR PART # XL Black/charcoal 4001-0114 CT Black/charcoal 4001-0179 CAN-AM SPYDER RT Black/charcoal 4001-0137 Black/charcoal 4001-0235 F3 black/charcoal 4001-0180 COLOUR PART # SPYDER F3T TOUR/F3 LTD 15-18 Black/charcoal 4001-0201 CAN-AM RYKER 19-21 Black/charcoal 4001-0234 Black/black 4001-0236 POLARIS Slingshot 15-21 4001-0243 ULTRAGARD® CLASSIC COVERS • Water-resistant, lightweight, polyurethane-coated polyester construction • UV stability prevents material breakdown and fading • Scorch-resistant exhaust protection • Elastic hem • SoftTek windshield protection • Ultragard® vent system • Zippered windshield and sissybar pockets • Available in different styles in the following sizes: large cruiser (L), large Touring (LT), extra-large bagger (XL), trike (T), Touring (GT) and Cruiser Trike (CT) • Also available for Can-Am Spyder RT, Ryker and Polaris Slingshot 4001‑0236 4001‑0243
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 11 partscanada.com HELMET LOCK EXTENSION FOR CAN-AM RT 20-21/ HONDA GL1800 GOLD WING 18-20 • Makes helmet locking easier by allowing for the securing of the helmet through its strap ring onto the bike’s locking device KICKSTAND BASE FOR HONDA GL1800 GOLD WING 18-21 • 200% larger than OEM base • Black satin finish KICKSTAND DISK • 33/4” black ABS-plastic kickstand disk • Knurled texture base pattern • Grips concrete, asphalt and gravel better than smooth based plates • Ideal for preventing your bike from sinking into hot asphalt DESCRIPTION PART # Grey (ea.) 0521-1552 DESCRIPTION PART # Black (pr.) 0521-1676 KEY COVERS FOR CAN-AM SPYDER • Adds the missing keyhole to a Can-Am Spyder Key • Unique two-piece design snaps over the Spyder Key, giving a mounting hole for a keychain or key ring • Comes with a wire barrel lock key ring to add additional keys to • Simple yet stylish design complements the Can-Am Spyder Key making this accessory blend in without interfering with the embedded chip 0521-1676 0521-1552 MAGNETIC OIL DRAIN PLUGS • Attracts and holds ferrous metal particles floating in your engine • Allows you to inspect the oil for any ferrous metals in your oil to help indicate any potential problems that may need servicing FITS MODEL PART # CAN-AM Spyder F3/RT 14-21 0712-0551 Spyder GS/RS/ST 08-13 0712-0552 HONDA VT750 Spirit 07-15 0712-0552 VT750 Phantom 10-17 0712-0552 VT750 Aero 14-22 0712-0552 VT750 Ace Deluxe 98-03 0712-0552 VT1100 Sabre/Spirit 99-08 0712-0552 VT1100 Ace/Tour 95-01 0712-0552 VTX1300R/S/T 03-09 0712-0553 FITS MODEL PART # HONDA (CONT) Valkyrie 14 0712-0552 Interstate 99-01 0712-0552 GL1500 88-00 0712-0552 GL1800 Gold Wing/F6B 01-17 0712-0552 GL1800 Gold Wing 18-21 0712-0553 VTX1800 04-09 0712-0553 KAWASAKI VN800 95-05 0712-0553 VN1500 Drifter 99-05 0712-0553 VN1500 Nomad 99-01 0712-0553 FITS MODEL PART # KAWASAKI (CONT) VN1500 Vulcan Classic 96-08 0712-0553 VN1500 Vulcan Mean Streak 04-08 0712-0553 VN1700 Classic/Nomad/Vaquero/ Voyager 09-17 0712-0553 YAMAHA XVS650 V-Star 98-16 0712-0553 XVS1100 V-Star 00-09 0712-0553 Star Venture/Eluder 18-19 0712-0552 0712-0552 0712-0551 PART # DESCRIPTION 0510-0400 Kickstand Disk PART # DESCRIPTION 0510-0581 Kickstand Base PART # DESCRIPTION 0136-0050 Helmet Lock Extension
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 12 partscanada.com DESCRIPTION PART # Thin Blue Line (6” x 9”) 0521-1550 FLAGS • Flags are double-sided, heavy-duty polyester and fit 3/8” poles; include O-ring 0521-1550 DASH TRI-POUCH FOR CAN-AM SPYDER RT 08-19 • Windshield dash pouch system • Tri-Pouch System is a new design of their three distinct pouches • Improved adhesion to the textured dash at highway speed • Center pouch compartment is a generous 9” x 6” x 2” and two side compartments each measure 5” x 4” x 1.5” • All pouches close with a zipper to ensure nothing falls out while riding • Made in the U.S.A. 890 SADDLEBAG LINER FOR HONDA GL1200 84-87, GL1500 88-00, GL1800 01-18 • Makes loading and unloading saddlebags easy and convenient • Made of sturdy, weather-resistant, urethane-coated nylon • Handy carrying handles • Measures 20” W x 111/2” H x 51/2” D • Sold each 480 SADDLEBAG KING KOOLER • Turn your saddlebag into an insulated cooler • Liner is insulated, waterproof and custom fit to Honda Gold Wing, Yamaha, Kawasaki, Indian and Victory saddlebags • Ideal for hot, dusty roads, picnics or parties • Measures 19” x 10” x 6” • Sold each • Made in the U.S.A. DUAL-SIDE TANK POUCHES FOR CAN-AM RYKER 19-21 • A perfect solution to the lack of storage on the Ryker • Includes a flap to protect the zipper opening • Complements the Ryker’s lines • Anchors securely to the tank side cover with a felt-backed base • Secures using OEM push-pins and hook-and-loop fasteners • No drilling required • Measures: 91/2” L x 41/2” T x 13/4” W • Sold in pairs PART # DESCRIPTION 3550‑0189 Dash Tri-Pouch PART # DESCRIPTION 3501-0276 890 Saddlebag Liner PART # DESCRIPTION 3511-0026 480 Saddlebag King Kooler PART # DESCRIPTION 3502-0423 Dual-Side Tank Pouches
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 13 partscanada.com SADDLEBAG LID ORGANIZER FOR HONDA GL1800 GOLD WING 18-20 • Provides more functional space in the GL1800 saddlebags • Mounts to the inside saddlebag door with double-sided adhesive hook-and-loop • Easy to remove and reinstall • Features five convenient pouches for storage, four that are zippered closed and the other with a hook-and-loop closure and one hidden pocket • Measures 183/4” x 8” 920 SADDLEBAG LINER FOR HONDA GL1800 GOLD WING 18-21 • Custom designed to match the Gold Wing saddlebag contour • Matches the 920 cubic inches of storage space • Features a double zipper for convenient packing and unpacking capabilities • Includes carry handles with reinforced grips • Measures 181/2” x 9” x 6” 850 SADDLEBAG LINER FOR CAN-AM SPYDER RT (SADDLEBAG) 08-19 • Convenience in storage for the Can-Am Spyder RT • Features stitched easy-to-grab sturdy carry handle • Measures a generous 15” x 10.75” x 9.25” • Sold each FRONT TRUNK LINER FOR CAN-AM RT 20-21 • Two-bag liner set provides an easier packing experience than one oversized bag • The larger bag is 151/2” x 14” x 11” and has a full zippered top with a carry handle and backpack straps • The smaller bag is 103/4” x 71/4” x 7” with reinforced carry handles • Both bags combined provide 1970 cubic inches of packaging space TRUNK ORGANIZERS FOR HONDA GL1800 GOLD WING 18-21 • Includes left and right side storage systems • Mounts to trunk panels with OEM screws and supplemental hook-and-loop fasteners; no drilling required • Does not take away any helmet storage space • Left-side includes two 11” x 7” storage pockets, one with a flap and one without a flap • Right-side includes a covered 6” x 6” pouch for added storage and a 5” x 5” open mesh pocket • Perfect for storing smaller items like sunglasses, wallet, phone, etc. TRUNK ORGANIZER FOR CAN-AM F3 16-21, RT 20-21 • Quickly and easily mounts to the inside trunk back using the passenger cushion screws • Additional hook-andloop with adhesive backing helps secure organizer in place • Includes one 5” x 6” pocket with flap, one elastic mesh pocket, two 6” T pocket sleeves and two elastic holders • Made in the U.S.A. PART # DESCRIPTION 3516‑0335 Saddlebag Lid Organizer PART # DESCRIPTION 3501‑1580 920 Saddlebag Liner PART # DESCRIPTION 3501‑0856 850 Saddlebag Liner PART # DESCRIPTION 3516‑0317 Trunk Organizers PART # DESCRIPTION 3516‑0330 Trunk Organizer PART # DESCRIPTION 3516‑0333 Front Trunk Liner
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 14 partscanada.com OIL FILTER WRENCH • Ultra-thin wrench allows removal of oil filter without removing fairing pieces • Posi-Lock™ design; requires no adjustment • Fits most 21/2” oil filters for Honda VTX, VT750, ST1100, GL1500 and GL1800 models 21/2” OIL FILTER WRENCH • Redesigned handle incorporates two drain plug wrench sizes to easily fit drain plugs when changing oil and filters • Canted 30° to allow easier access to the drain plug • 12-sided wrench addition provides easy access to 12mm and 17mm drain plugs • Zinc-plated with chrome finish 51/2” TWO-WAY FRONT SPEAKER KIT FOR HONDA GL1800 GOLD WING/FSB 06-17 • Features cutting-edge 51/2” two-way coaxial stereo speakers • Kit includes a pair of waterproof high-output midrange speakers driven by a sturdy state-of-the-art neodymium magnet with poly mylar tweeters, delivering unmatched sound quality • Speakers are rated with 3 ohms of impedance and 160 watts of maximum power to deliver the superior sound you crave • Can be used in other applications requiring 51/2” speakers DESCRIPTION PART # HONDA FOR FRONT GL1800 GOLD WING 01-05/18, REAR GL1800 GOLD WING 01-21 Pair 4405-05391 1 Rear 01-21. 41/2” 2-WAY NEODYMIUM SPEAKERS • Updated version of the 41/2” 2-way coaxial speakers • High-output mid-range speaker that is driven by a state-of-art neodymium magnet with poly mylar tweeter • Delivers unmatched sound quality • 3 ohms • 120W • Waterproof DESCRIPTION PART # HONDA GL1100/1200/1500/1800 GOLD WING (ALL) Grey 4001‑0037 ULTRAGARD® CLASSIC HALF COVERS • Water-resistant, lightweight polyester construction • Scorch-resistant • SoftTek windshield protection • Ultragard® vent system PART # DESCRIPTION 3801-0037 Oil Filter Wrench PART # DESCRIPTION 3801-0357 2-1/2" Oil Filter Wrench PART # DESCRIPTION 4405-0501 5-1/2" Two-Way Front Speaker Kit
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 15 partscanada.com TRAILER COVER • Covers comfortably fit most pull-behind trailers from Bushtec 56” x 48” shaped trailers to the longer 70” Escapades • Come with UltraGards proven double-stitched interlocking seams, full elastic hem and handy zippered storage pouch • Fit most trailers • Available in black/charcoal HALF COVER FOR CAN-AM SPYDER RT 20-21 • Custom designed specifically for the Spyder RT • Made from custom yarn dyed water-resistant polyurethane-coated polyester to provide excellent protection against weather, dirt and pollution • Durable folded interlocking seams provide the best durability and weather-resistance • SoftTek™ windshield liner to protect your windshield • Sewn-in elastic hem with elastic straps with hooks to help secure from blowing wind • Convenient compact drawstring storage pouch • High-visibility reflective logo to help your covered ride be seen in dark parking lots • Left and right antenna access points with hook-and-loop sealing PART # DESCRIPTION 4050-0036 Trailer Cover PART # DESCRIPTION 4001‑0237 Half Cover ELECTRONICALLY ISOLATED TRAILER WIRE HARNESS FOR HONDA GL1800 GOLD WING 01-10 • Isolates wiring between bike and trailer to prevent electrical feedback into the bike • Plugs into existing wiring TRAILER HITCH FOR CAN-AM SPYDER F3/LTD/RT/RS/ST/GS 08-21 • Features a durable black powdercoat finish and mounts without removal of the rear tire or its axle • Once installed, removal is easy with only six bolts to pull if you want the hitch assembly off for a special trip or occasion • Includes all hardware and instructions • A mud flap (not included) can be easily mounted with included brace brackets and mounting holes • The receiver mount has a .75” hole for owner’s choice of ball type • Made in the U.S.A. SAFETY WARNING: For information on the care, safety,maintenance,mounting,manufacturer’s warranty and other information, consult the motorcycle manufacturer’s and the trailer hitch manufacturer’s publication(s) and/or website(s) for complete information. Towing can negatively affect handling, cornering, stopping and stability and may void your warranty.Towing increases the likelihood of serious injury or death. If you tow a trailer, never exceed the motorcycle manufacturer’s Gross Vehicle Weight. PART # DESCRIPTION 3902-0015 Electronically Isolated Trailer Wire Harness PART # DESCRIPTION 3902‑0262 Trailer Hitch
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 16 partscanada.com DESCRIPTION PART # LT; for Honda GL1500/1800 Gold Wing 4001-0211 LT half-cover; for Honda GL1500/1 800 Gold Wing 4001-0225 L 4001-0213 DESCRIPTION PART # T 4001-0214 RT 4001-0215 For Can-Am Ryker 19-21 4001-0239 ULTRAGARD® ESSENTIALS™ CLASSIC COVERS • Water-resistant, lightweight, polyurethane-coated polyester construction • Elastic hem • SoftTek windshield protection • Ultragard® vent system • Zippered storage pouch • Windshield liner • Rustproof, tie-down grommets • Bungee tie-down cords • Graphic black in colour • Available in different styles in the following sizes: large Touring (LT), large cruiser (L), Touring (GT) and trike (T) • Also available for Can-Am Spyder RT and Can-Am Ryker 4001‑0211 4001‑0213 4001‑0215 4001‑0227 4001‑0239 UNIVERSAL TRAILER HITCH RACK • Made from durable powdercoated steel, this rack will give years of service and hold up to harsh road grime • Lets riders take more on a ride without a trailer • Rack offers a generous 16” x 101/2” platform that can accommodate coolers, extra luggage, bags and more • 1.5” high tubular frame is deep enough to secure a load and give peace of mind while riding • A simple mounting bracket design uses the hitch ball as its mounting bolt with a custom designed washer that prevents movement once securely tightened • Works with most receivers up to 3” wide, and fits balls with up to a 3/4” shank • As it mounts to the receiver ball mount, it fits with both horizontal and vertical receiver hitch assemblies • A quick-release design allows quick removal by simply removing the two locking pins (included) and sliding the rack free of the mount to accept a trailer • Open, tubular design brings this durable rack in at barely over 6 lb. PART # DESCRIPTION 3902‑0162 Universal Trailer Hitch Rack
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 17 partscanada.com BOTTOM END KITS • Owners have the choice between Hot Rods Heavy Duty OE replacement crankshafts or Hot Rods Heavy Duty Stroker Crankshafts • Kits feature everything needed to complete crankshaft installation including Hot Rods main bearings and seals kit plus a complete engine gasket set that includes all gaskets and seals for complete engine rebuild NOTE: Kits do not include mechanical water pump seal. FITS MODEL PART # POLARIS Scrambler 850 13, Scrambler 850 HO EPS 13, Sportsman 850 XP EPS HO 13 0921-0895 Scrambler 850 14-20 0921-0896 Sportsman 850 High Lifter 16-20, Sportsman 850 SP 15-20, Sportsman 850 XP EPS HO 15, Sportsman Forest 850, Euro 15, Sportsman Touring 850 EPS 14, Sportsman Touring 850 SP 15-20 0921-0896 ACE 900 EPS 16 0921-0898 Ranger 900 4x4 Crew 16, Ranger 900 XP 16 0921-0898 RZR 4 900 16, RZR 900 50” 16, RZR 900 55” 16, RZR 900 60” 16 0921-0898 Ranger XP 1000 Crew 17, Ranger XP 1000 Crew EPS 17 0921-0891 SKID PLATE FOR CAN-AM RYKER 19-22 • Protects the undercarriage, especially the fragile plastic clutch housing • Constructed from one-piece of heavy-duty aluminum • Allows easy access to oil drain plug • Includes all necessary hardware and instructions • Measures 2.6mm x 10.5” W HANDLEBAR RISERS FOR CAN-AM RYKER 19-22 • Provides easy handlebar repositioning • Choose between two positions for enhanced comfort • Made from billet aluminum • Provides up to 2” of upward positioning and 7/8” forward/backward adjustment • Includes all necessary hardware and instructions HIGHWAY FOOT RESTS FOR CAN-AM SPYDER RT 20-22 • Perfect for riders looking to rest their legs and ease knee discomfort on long rides • Feature 15+ different mounting positions to allow riders to find their perfect comfort zone • Made from durable steel • 4” x 2” non-slip rubber surface for increased comfort and safety 0921-0896 PART # DESCRIPTION 0505-2293 Skid Plate PART # DESCRIPTION 0602-1358 Handlebar Risers PART # DESCRIPTION 1620-2369 Highway Foot Rests
STREET • OFFROAD • ATV/UTV • SNOWMOBILE • TIRE & SERVICE • HELMET & APPAREL 18 partscanada.com FENDER ELIMINATOR KIT FOR YAMAHA 2021-22 MT-07 • New improved D.O.T. compliant L.E.D. light and housing • New easy to use Heat Shrink Solder Sleeve Butt Connectors • Model specific precision laser-cut stainless steel bracket tucks discreetly under the tail section of the motorcycle • Black anodized aluminum license plate frame with silk screened Yoshimura logo • Installation hardware and detailed instructions included • Compatible with Yoshimura or aftermarket turn signals when combined with Universal Turn Signal Bracket Kit (sold separately) PART # DESCRIPTION 2030-2169 Fender Eliminator Kit RIGID HANDLEBAR MUFFS • Water repellent nylon outer shell; soft inner lining for warmth and comfort • Rigid plastic inserts provide a wide opening and protection • Designed for easy adjustment and more hand room • Fit most ATVs PART # DESCRIPTION 804322 Rigid Handlebar Muffs
RkJQdWJsaXNoZXIy NDI5NTY=