JULY 2023 partscanada.com ATV UTV FITS MODEL DESCRIPTION COMPRESSION RATIO PART # KAWASAKI KRX 1000 Teryx 20-23 Standard bore cylinder (92mm) - 0931-1119 KRX 4 1000 23 Standard bore cylinder (92mm) - 0931-1119 POLARIS RZR Turbo Pro 20-22 Standard bore cylinder (93mm) - 0931-1120 Standard bore cylinder kit (93mm) 9.0:1 0931-1123 RZR Turbo S 21 Standard bore cylinder (93mm) - 0931-1120 Standard bore cylinder kit (93mm) 9.0:1 0931-1123 RZR Turbo S 18-20 Standard bore cylinder (93mm) - 0931-1120 RZR XP/XP 4 Turbo 18-21 Standard bore cylinder (93mm) - 0931-1120 Standard bore cylinder kit (93mm) 9.0:1 0931-1123 RZR XP/XP 4 Turbo 17 Standard bore cylinder (93mm) - 0931-1120 +2mm big bore kit 9:1 0931-1122 RZR XP/XP 4 Turbo 16 Standard bore cylinder (93mm) - 0931-1120 Standard bore cylinder kit (93mm) 9:1 0931-1121 CYLINDERS AND CYLINDER KITS • Ready-to-install, direct bolt-on cylinders require no re-plating and look virtually identical to the OEM cylinders • Cylinder kits include matched Vertex pistons to ensure longevity, performance and reduced engine noise • Nickel silicon carbide-plated for long life CYLINDERS AND CYLINDER KITS continued on next page • Kits come complete with gaskets, cylinder, piston, rings, pin and clips • Replacement Vertex piston, rings, clips and pins also available • Made in the U.S.A. LOWDOWN STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL
2 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com CYLINDER HEAD STUD BOLT KIT • Allows user to perform multiple engine assemblies and disassemblies without the need to replace cylinder studs • High strength steel allows for a higher fastening load of the cylinder head to the cylinder, preventing head gasket leakage • Black oxide coating for added corrosion resistance and rust prevention • Includes six stud bolts, six nuts, six washers and two side cylinder bolts FITS MODEL PART # POLARIS Ace 900 EPS 16-19 0931-1115 RZR 900 XP 11-13 0931-1115 RZR 4 900 14-19 0931-1115 RZR 4 900 XP 12-14 0931-1115 General 1000 EPS 16-19 0931-1115 General 1000 EPS Deluxe/Sport 20-22 0931-1115 General 1000 EPS Premium 18-22 0931-1115 General 4 1000 EPS 16-20 0931-1115 General 4 1000 EPS Deluxe 20-22 0931-1115 General 4 1000 EPS Premium 21-22 0931-1115 General XP 1000 EPS 20 0931-1115 General XP 1000 EPS Deluxe 20-22 0931-1115 FITS MODEL PART # POLARIS (CONT) General XP/XP 4 1000 EPS Hunter 21 0931-1115 General XP/XP 4 1000 EPS Trailhead 22 0931-1115 General XP 4 1000 EPS Deluxe 20-22 0931-1115 Ranger 1000/Crew/Crew Premium/ EPS/EPS Premium 22 0931-1115 Ranger XP 1000 17-19 0931-1115 Ranger XP 1000 Crew EPS 20-22 0931-1115 RZR 1000 Trail S 22 0931-1115 RZR RS1 18-22 0931-1115 RZR Turbo 20-22 0931-1115 RZR XP/XP 4 1000 14-22 0931-1115 OFFROAD FITS MODEL DESCRIPTION COMPRESSION RATIO BORE (MM) PART # YAMAHA WR250F 20-22 Standard bore cylinder - 77 0931-1117 Standard bore cylinder kit 13.8:1 77 0931-1118 +3mm Big Bore gasket kit - - 0934-7521 YZ250F 19-22 Standard bore cylinder - 77 0931-1117 Standard bore cylinder kit 13.8:1 77 0931-1118 +3mm Big Bore gasket kit - - 0934-7521 YZ250FX 20-22 Standard bore cylinder - 77 0931-1117 Standard bore cylinder kit 13.8:1 77 0931-1118 +3mm Big Bore gasket kit - - 0934-7521 CYLINDERS AND CYLINDER KITS (CONT)
3 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com PART # 0940-2115 PART # 0940-2114 CLUTCH COVER FOR YAMAHA YZ450F 23 • Specifically engineered to provide unparalleled durability and performance in a single, stylish component • Ready to ride whenever you are, standing up against rocks, logs, boots and whatever else you may encounter in your adventures • Billet aluminum construction provides incredible strength • Double hard anodized to further enhance durability and wear resistance • Has a greater depth than the OEM design, allowing increased oil capacity • Made in the U.S.A. FITS MODEL LOCATION PART # APRILIA All models (except 250s) Header M7717 GAS GAS 2-strokes 97-15 Pipe M7715 HONDA CR80R 86-01 Pipe M7712 CR80/85R 02-07 Pipe M7718 CR125R 02-07 Pipe M7712 CR250R 86-97 Pipe M7711 CR250R 98-08 Pipe M7712 CR500R 86-98 Pipe M7712 HUSABERG 2-strokes 12-14 Pipe M7714 4-strokes 12-14 Silencer M7715 HUSQVARNA 2-strokes 92-08 Pipe M7716 2-strokes 09-16 Pipe M7711 4-strokes 91-08 Pipe M7717 4-strokes 91-08 Header M7717 4-strokes 09-16 Pipe M7714 FITS MODEL LOCATION PART # HUSQVARNA (CONT) 4-strokes 09-16 Header M7714 KAWASAKI KX60/65 85-16 Pipe M7714 KX80/85/100 89-16 Pipe M7714 KX125 87-89 Pipe M7710 KX125 90-07 Pipe M7714 KDX200/220 89-06 Pipe M7710 KX250/500 84-97 Pipe M7710 KX250 98-00 Pipe M7716 KX250 01-08 Pipe M7717 KX500 98-05 Pipe M7710 KTM SX65 98-16 Pipe M7713 Silencer M7714 2-strokes 85-97 Pipe M7715 2-strokes 98-16 Pipe M7714 4-strokes 98-16 Header M7713 4-strokes 89-16 Silencer M7715 FITS MODEL LOCATION PART # SUZUKI RM60/65 03-07 Pipe M7714 RM80/85 89-16 Pipe M7715 RM100 03-04 Pipe M7714 RM125 84-91 Pipe M7710 RM125 92-08 Pipe M7715 RM250 88-91 Pipe M7710 RM250 92-08 Pipe M7715 RMX250 88-91 Pipe M7710 RMX250 92-98 Pipe M7715 TM 80J 96-12 Pipe M7716 125/250/300 91-16 Pipe M7717 YAMAHA YZ80/85 85-16 Pipe M7711 YZ125/250 89-16 Pipe M7711 WR250 89-97 Pipe M7711 YZ250F/400F/426F/450F 98-16 Silencer M7711 SPRING LENGTHS LENGTH PART # 38mm M7713 57mm M7714 60mm M7715 LENGTH PART # 63mm M7709 67mm M7710 70mm M7716 LENGTH PART # 75mm M7711 80mm M7717 83mm M7712 LENGTH PART # 90mm M7718 100mm M7720 EXHAUST SPRINGS • Stainless steel construction gives superior strength and appearance • Swivel hook design eliminates binding, extending spring life • Available for most late-model 2-stroke and 4-stroke models • Sold in pairs • Made in the U.S.A. NOTE: When measuring for exhaust spring length, please use points #1 - #3 for reference. 1. Exhaust springs should be measured when they are off the vehicle. Wear eye protection when removing. 2. The length measurement should be taken from inside hook to opposite end inside of hook. 3. For correct fit, an exhaust spring should not be extended more than 20% of its free length. CLUTCH COVER FOR YAMAHA YZ450F 23 • Improves heat dissipation • Stronger than stock • Precision machined from billet T-6 aircraft-quality aluminum • Race proven by virtually every factory race team • Hard-coated to resist boot wear • Made in the U.S.A.
4 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com SIDE-BY-SIDE OIL CHANGE KIT MORE RIDING. LESS MAINTAINING. We get it. You don’t have a ton of time to waste on changing your oil. You’ve got better places to be, bigger things to see. That’s why we crafted the Klotz® Side-By-Side Oil Change Kit. Our premiere class of synthetic lubricants out performs every other oil on the market. Pushing the limits with our top class choice. Increase performance, save money, and stop wasting time. WE’VE DONE THE RESEARCH, WE HAVE YOU COVERED! Klotz® Side-By-Side Oil Change Kits come with just the right amount of lubricant, no more no less. Developed for the extreme loading stresses of off-road use while providing smoother, quieter clutch and transmission operation. Top-tier additive package prevents wear, oxidation and corrosion. Detergents and dispersants maintain cleanliness and mitigate deposit formation. PART # APPLICATION FITMENT OIL (# OF QTS.) FILTER WASHERS, AND O-RINGS 3601-0870 Polaris 2018 RZR Turbo S 2016-18 RZR XP Turbo KL-802 (Qty. 3) SxS 5W/50 HF-198 Cometic Crush Washer 2014+ RZR XP 1000 2018 RZR RS1 2013+ RZR 900 2017+ Ranger 1000 2013-19 Ranger 900 3601-0869 Polaris 2018 RZR Turbo S KL-805 (Qty. 3) SxS 10W/50 HF-198 Cometic Crush Washer 2016-18 RZR XP Turbo 2014+ RZR XP 1000 2018 RZR RS1 2013+ RZR 900 2017+ Ranger 1000 2013-19 Ranger 900 3601-0868 Polaris 2019+ RZR XP Turbo KL-802 (Qty. 3) SxS 5W/50 HF-199 Cometic Crush Washer 2019+ RZR XP Turbo S 2020+ RZR Pro XP 3601-0867 Polaris 2019+ RZR XP Turbo KL-805 (Qty. 3) SxS 10W/50 HF-199 Cometic Crush Washer 2019+ RZR XP Turbo S 2020+ RZR Pro XP 3601-0866 Can-Am 2016+ Maverick X3 Turbo and Non-Turbo KL-804 (Qty. 4) SxS 10W/40 HF-152 Cometic O-Ring, Aluminum Washer 3601-0865 Can-Am 2016+ Maverick X3 Turbo and Non-Turbo KL-805 (Qty. 4) SxS 10W/50 HF-152 Cometic O-Ring, Aluminum Washer 3601-0864 Yamaha RMAX2 & RMAX4 (ALL) KL-804 (Qty. 5) SxS 10W/40 HF-204 Cometic Copper Washers 3601-0863 Yamaha YXZ1000R KL-806 (Qty. 5) SxS 15W/50 HF-204 Cometic Copper Washers, Drain Plug O-Ring 3601-0863 3601-0867 3601-0864 3601-0868 3601-0865 3601-0869 3601-0866 3601-0870
5 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com PART # 2040-3016 QUICK-RELEASE WHIP LIGHTS • 2” inner diameter tube and more LEDs than a 5’ Chasing whip • The quick release are quick to remove, and quick to install • The innovative Chasing whip bases feature all the wiring that the whip needs built inside the base itself • Bluetooth® control via a free, easy-to-use App; provides ultimate functionality including music sync, color, pattern and light effect customization, color brightness, speed control and group LED control • Chasing function with 300 different colors and 200 patterns, including flash, strobe and fade-through colors, stream, cascade and different color combinations from top, bottom, and middle; adjust speed/b rightness or lock on one color • IP67 dust and waterproof • Includes two whip lights, remote, wiring harness, dust caps and install instructions 1 4-pin. FITS MODEL PART # CAN-AM Maverick X3 Max Turbo 18-20 2040-3013 Maverick X3 Max Turbo DS 21 2040-3013 Maverick X3 Max Turbo R 17-19 2040-3013 Maverick X3 Max Turbo R DS 20-21 2040-3013 Maverick X3 Max Turbo R RS 20-21 2040-3013 Maverick X3 Max Turbo R X DS 17-19 2040-3013 Maverick X3 Max Turbo R X RS 17-19 2040-3013 Maverick X3 Max Turbo RR X DS 20-21 2040-3013 Maverick X3 Max Turbo RR X MR 20-21 2040-3013 Maverick X3 Max Turbo RR X RS 20-21 2040-3013 Maverick X3 Max Turbo RR X RS Smart-Shox 21 2040-3013 Maverick X3 Turbo DS 21 2040-3013 Maverick X3 Turbo R DS 20-21 2040-3013 Maverick X3 Turbo R RS 20-21 2040-3013 Maverick X3 Turbo RR X DS 20-21 2040-3013 Maverick X3 Turbo RR X MR (72”) 20-21 2040-3013 Maverick X3 Turbo RR X RC (72”) 20-21 2040-3013 Maverick X3 Turbo RR X RS 20-21 2040-3013 Maverick X3 Turbo RR X RS Smart-Shox 21 2040-3013 Maverick X3 Turbo R X DS 17-19 2040-3013 Maverick X3 Turbo R X MR 18-19 2040-3013 Maverick X3 Turbo R X RC 18-19 2040-3013 Maverick X3 Turbo R X RS 17-19 2040-3013 Maverick X3 Turbo R X RS w/ Smart-Lok 4x4 18 2040-3013 Maverick X3 Turbo X MR 18-21 2040-3013 Maverick X3 Turbo X RC 18-21 2040-3013 Maverick X3 Turbo R 900 4x4 17-19 2040-3013 Maverick X3 Turbo 900 4x4 18-21 2040-3013 Maverick X3 900 H.O. 4x4 18 2040-3013 FITS MODEL PART # KAWASAKI Teryx KRX 1000 eS 21 2040-3015 Teryx KRX 1000 20-22 2040-3015 Teryx KRX 1000 Trail Edition 21-22 2040-3015 Teryx KRX 1000 Special Edition 21-22 2040-3015 POLARIS Ranger 500 EFI 4x4 19-21 2040-30111 Ranger 500 (Mid-Size) EFI 4x4 17-18 2040-30111 Ranger 570 (Mid-Size) EFI 16-21 2040-30111 Ranger 570 (Mid-Size) EPS 16-20 2040-30111 Ranger 570 Premium 4x4 21 2040-30111 Ranger 800 6x6 16 2040-30111 RZR 900 Fox Ed. 4x4 20 2040-30111 RZR 900 Premium 4x4 20 2040-30111 RZR 900 4x4 16-20 2040-30111 RZR 900 EPS 4x4 16-19 2040-30111 General 1000 Deluxe EPS 4x4 16-21 2040-30111 General 1000 EPS 4x4 16-20 2040-30111 Ranger 1000 EPS 4x4 20-21 2040-30111 General 1000 EPS Limited 4x4 18-19 2040-30111 General 1000 EPS Premium 4x4 18-21 2040-30111 General 1000 EPS Ride Command Ed. 4x4 17-19 2040-30111 Ranger 1000 Premium 4x4 20-21 2040-30111 General 1000 Sport 4x4 20-21 2040-30111 RZR Pro XP 20 2040-30111 RZR Pro XP LE 20 2040-30111 RZR Pro XP Sport 21 2040-30111 RZR Pro XP Premium 20-21 2040-30111 RZR Pro XP Ultimate 20-21 2040-30111 PLUG-N-PLAY POWER ADAPTERS • Plug-n-play easy installation • Plugs into OE tail light harness • Power Wire - brake, tail and ground • Includes heat shrinkable butt connectors and cable ties • Plug-n-play power adapters can be used with our LED Whips or any 12V accessory • Sold each PLUG-N-PLAY POWER ADAPTERS continued on next page 2040-3013
6 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com FITS MODEL PART # POLARIS (CONT) RZR Turbo S 4x4 21 2040-30111 2040-30122 RZR Turbo S Lifted LE 4x4 21 2040-30111 2040-30122 RZR Turbo S Velocity 4x4 21 2040-30111 2040-30122 RZR 4 XP Turbo 4x4 16-18 2040-30111 RZR XP 1000 4x4 15-21 2040-30111 2040-30122 RZR XP 1000 Sport 4x4 21 2040-30111 2040-30122 RZR XP 1000 Dynamix Ed. 4x4 19 2040-30111 2040-30122 RZR XP 1000 EPS LE 4x4 17 2040-30111 2040-30122 RZR XP 1000 High Lifter Ed. 4x4 17-21 2040-30111 2040-30122 FITS MODEL PART # POLARIS (CONT) RZR XP 1000 Limited Edition 4x4 20 2040-30111 2040-30122 RZR XP 1000 Premium 4x4 20-21 2040-30111 2040-30122 RZR XP 1000 Ride Command 4x4 17-19 2040-30111 2040-30122 RZR XP 1000 Trails and Rocks Ed. 4x4 17-21 2040-30111 2040-30122 YAMAHA YXZ 1000R SS XT-R 4x4 20-22 2040-3014 YXZ 1000R SS 4x4 17-22 2040-3014 YXZ 1000R SS SE 17-21 2040-3014 YXZ 1000R 16-22 2040-3014 YXZ 1000R SE 4x4 16-20 2040-3014 1 4-pin. 2 8-pin. PLUG-N-PLAY POWER ADAPTERS (CONT) QUALIFIER GRIPS • Dual compound grips • Firm compound is used for the inner and outer flange COLOR PART # HALF WAFFLE (A) Gray/black 0630-1830 (B) Gray/blue 0630-1831 (C) Gray/green 0630-1832 COLOR PART # (D) Gray/orange 0630-1833 HALF WAFFLE (CONT) (E) Gray/red 0630-1834 FULL WAFFLE COLOR PART # Blue 0630-1835 Red 0630-1836 FULL DIAMOND Gray/black 0630-1837 and soft compound is used for the outer diameter of the grip • 5” L • Available in half waffle, full waffle and full diamond patterns • Sold in pairs for use with twist throttle A C B D E DUAL LAYER GRIP DONUTS • Made from ultra-soft neoprene backed with mud-shedding foam • Oversized for full coverage • Won’t peel apart or wrinkle • Sold in pairs DESCRIPTION PART # Dual Layer Grip Donuts 0630-0389
7 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com TYPE PART # Elite Series UTV side mirrors (pr.) 0640-1688 Elite Series UTV side mirror (ea.) 0640-1689 ELITE SERIES UTV SIDE MIRRORS • Fully adjustable three-way adjustable view orientation • Low-profile universal clamps/mounting • Spring-loaded dual-axis breakaway mechanism • Anti-vibration technology • Fit 1.5”-2.25” tubular roll cages • Fit right or left • Sold in a pair or each • Come with black frame • Add-on accent frames sold separately DESCRIPTION PART # Elite Series Pro UTV side mirrors (pr.) 0640-1686 Elite Series Pro UTV side mirror (ea.) 0640-1687 ELITE SERIES PRO UTV SIDE MIRRORS • Fully adjustable, three-way adjustable view orientation • Adjustable blind spot mirror • Low-profile universal clamps/mounting • Spring-loaded dual-axis breakaway mechanism • Anti-vibration technology • Fit 1.5”-2.25” tubular roll cages • Fit right or left • Sold in a pair or each • Come with a black frame • Add-on accent frames sold separately DESCRIPTION PART # Fits 1.75” roll cage 0640-1679 Fits 1.85” roll cage 0640-1680 Fits 2” roll cage 0640-1681 APEX SIDE VIEW MIRRORS • Machined aluminum and anodized black • Glass measures 6.23” L x 3.65” H • Strong, functional mirror that looks great • Unique breakaway design holds solid when hitting 70 mph, but easily folds if you happen to hit a tree branch • Clamp design makes install and removal a breeze • Slide the clamp over the roll cage and install with two Allen bolts DESCRIPTION PART # Fits 1.75” roll cage 0640-1682 Fits 1.85” roll cage 0640-1683 Fits 2” roll cage 0640-1684 APEX REAR VIEW MIRRORS • Poly body is extremely durable and can handle the abuse your UTV takes on a daily basis • Injection molded plastic with a brushed aluminum trim • Glass measures 12.5” L x 2.95” H • Unique clamp and breakaway design prevents your mirror from moving around on you, but at the same time is adjustable • Easy to install and remove • Slide the clamp over the roll cage and install with two socket cap hex head bolts 0640-1682 0640-1679 0640-1688 0640-1687 0640-1686
8 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com ATR-2 HELMETS • Omni-Directional Suspension® (ODS®) technology; improved design reduces linear and angular accelerations • Multi-Impact EPP Outer Liner incorporates Isolation Dampening Towers • Emergency release cheek pads - removable, washable Dri-Lex® anti-bacterial fabric • Shell - a proprietary woven blend of advanced aerospace carbon fiber, composite fiberglass and Kevlar • Comfort liner - removable, washable comfort liner, Dri-Lex® anti-bacterial fabric • Shear-away vision screws • Cervical spine relief - rear lower shell incorporates compliant zone at the cervical spine location • Air flow management features 9 intake ports, 6 exhaust ports that work together with the air gap ventilation system • Titanium D-rings • Inner EPS liner is replaceable • Optimal mid, low and high speed impact mitigation • Lightweight with improved center of gravity (+/- 1250 grams Size M) • Clavicle cut-away - provides increased clavicle clearance • Roost guard - provides additional face protection • Sternum pad - provides added protection for the chin, jaw and sternum • Exceeds ECE 22.06, DOT, ACU and ASTM standards • See the 6D helmet size guide before ordering DRIVE SIZE (A) WHITE (B) CYAN (C) NEON-ORANGE (D) NEON-YELLOW XS 0110-8259 0110-8265 0110-8271 0110-8277 S 0110-8260 0110-8266 0110-8272 0110-8278 M 0110-8261 0110-8267 0110-8273 0110-8279 L 0110-8262 0110-8268 0110-8274 0110-8280 XL 0110-8263 0110-8269 0110-8275 0110-8281 2X 0110-8264 0110-8270 0110-8276 0110-8282 A B C D
9 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com ATR-2 HELMETS continued on next page PHASE SIZE (C) BLACK-GOLD (D) WHITE-ORANGE (E) WHITE-RED (F) BLACK-GREEN XS 0110-8283 0110-8289 0110-8295 0110-8301 S 0110-8284 0110-8290 0110-8296 0110-8302 M 0110-8285 0110-8291 0110-8297 0110-8303 L 0110-8286 0110-8292 0110-8298 0110-8304 XL 0110-8287 0110-8293 0110-8299 0110-8305 2X 0110-8288 0110-8294 0110-8300 0110-8306 ATR-2 HELMETS (CONT) SOLID SIZE (A) MATTE BLACK (B) GLOSS WHITE XS 0110-8247 0110-8253 S 0110-8248 0110-8254 M 0110-8249 0110-8255 SIZE (A) MATTE BLACK (B) GLOSS WHITE L 0110-8250 0110-8256 XL 0110-8251 0110-8257 2X 0110-8252 0110-8258 A B C E D F
10 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com SIZE INCHES CM XS 20 7/8 - 21 1/4 53-54 S 21 5/8 - 22 55-56 SIZE INCHES CM M 22 1/2 - 22 3/4 57-58 L 22 3/4 - 23 1/4 58-59 SIZE INCHES CM XL 23 5/8 - 24 60-61 2XL 24 7/16 - 24 3/4 62-63 ATR HELMET SIZE GUIDE ATR-2 FUSION HELMETS SIZE (A) BLACK (B) BLUE (C) RED (D) NEON-PINK XS 0110-8307 0110-8313 0110-8319 0110-8325 S 0110-8308 0110-8314 0110-8320 0110-8326 M 0110-8309 0110-8315 0110-8321 0110-8327 L 0110-8310 0110-8316 0110-8322 0110-8328 XL 0110-8311 0110-8317 0110-8323 0110-8329 2X 0110-8312 0110-8318 0110-8324 0110-8330 ATR-2 HELMETS (CONT) B C D A
11 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com SIZE (A) BLACK (B) BLACK/WHITE S 0151-0083 0151-0045 M 0151-0084 0151-0046 L 0151-0085 0151-0047 XL 0151-0086 0151-0048 TRAJECTA HELMETS • 13-point smartshock rotational protective system • Multi-density EPS foam injection-molded polycarbonate • Multi-point adjustable visor designed for maximum vision and goggle stowage • Antimicrobial washable, moisture-wicking liner • Lightweight D-ring locking closure • Fidlock SNAP magnetic buckle A B
12 STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL partscanada.com SIZE MATTE BLACK XS 0140-0221 S 0140-0222 SIZE MATTE BLACK M 0140-0223 L 0140-0224 SIZE MATTE BLACK XL 0140-0225 2X 0140-0226 FX-37X • Features an aerodynamic shell design constructed using an advanced lightweight composite poly-alloy • Flush-fit, built-in side-cover style face shield that is optically correct, compound-curved, scratch resistant and protects against UV rays • Nine points of ventilation with chin, side, forehead, top and rear vents; there are three intake vents and six exhaust vents • Chin vent is stainless steel mesh for easy cleaning • Removable and adjustable 30mm screw-on visor AFX HELMET SIZE CHART SIZE HAT SIZE INCHES CENTIMETERS XXS1 63/8 - 61/2 201/8 - 201/2 51 - 52 XS1 65/8- 63/4 207/8 - 211/4 53 - 54 S 67/8 - 7 215/8 - 22 55 - 56 M 71/8 - 71/4 223/8 - 223/4 57 - 58 L 73/8 - 71/2 231/8 - 231/2 59 - 60 SIZE HAT SIZE INCHES CENTIMETERS XL 75/8 - 73/4 24 - 243/8 61 - 62 2X 77/8 - 8 243/4 - 251/8 63 - 64 3X 83/8 - 81/2 255/8 - 26 65 - 66 4X 85/8 - 83/4 263/8 - 263/4 67 - 68 1 Due to size similarities between Youth Large and Adult X-Small, it is the Parent’s/Guardian’s responsibility to determine if a Youth rider may safely and comfortably wear an Adult sized helmet. • Dura-mesh liner and cheek pads give the ultimate protection and comfort; liner and cheek pads are removable and washable for easy cleaning • Double-D ring race-approved retention system • Provides ample cavity space for most speaker systems • DOT approved • See helmet size guide below before ordering
RkJQdWJsaXNoZXIy NDI5NTY=