DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PARTSCANADA.COM MAY 2025 LOWDOWN STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL FITS MODEL PART NO. BMW R1250GS 19-23 0506-2396 R1250GS Adventure 19-23 0506-2396 GASGAS EC 250 24-25 0506-2385 EX 250 24-25 0506-2385 EX 250F 24-25 0506-2386 MC 250 24-25 0506-2385 MC 250F 24-25 0506-2386 EC 300 24-25 0506-2385 EX 300 24-25 0506-2385 ES 350 22-25 0506-2386 EX 350F 24-25 0506-2386 MC 350F 24-25 0506-2386 EX 450F 24-25 0506-2386 MC 450F 24-25 0506-2386 ES 500 22-25 0506-2386 ES 700 22-24 0506-2393 HONDA XR150L 23-24 0506-2395 CRF250R 23-25 0506-2387 CRF250RWE 25 0506-2387 CRF250RX 23-25 0506-2387 CRF450R 23-25 0506-2388 CRF450RX 23-25 0506-2388 HUSQVARNA FC 250 23-25 0506-2386 ALUMINUM SKID PLATES • Protect vital engine parts and cases from rocks and debris • Clear anodized for corrosion protection and good looks • Skid plates made from 3/ 16” 5052-H32 aluminum (some plates use 0.160” material) • Smooth underside won’t snag when crossing logs • Oil drain hole on all required models • Heat-treated chromoly steel clamps keep plates mounted securely • All mounting hardware included • Replacement clamps available REPLACEMENT HARDWARE • Bolts sold in set of four bolts and four washers; clamps sold each, include bolt and washer 0506-2396 FITS MODEL PART NO. HUSQVARNA (CONT) FE 250 24-25 0506-2386 TC 250 23-25 0506-2385 TE 250 23-25 0506-2385 TC 300 23-25 0506-2385 TE 300 23-25 0506-2385 TE 300 Pro 24-25 0506-2385 TX 300 23-25 0506-2385 FC 350 23-25 0506-2386 FE 350 24-25 0506-2386 FE 350s 24-25 0506-2386 FX 350 23-25 0506-2386 FC 450 23-25 0506-2386 FE 450 24-25 0506-2386 FX 450 23-24 0506-2386 FE 501 24-25 0506-2386 FC 501 23-25 0506-2386 FE 501s 24-25 0506-2386 701 Enduro 16-24 0506-2393 KAWASAKI KLX125/L 03-05 0506-2389 KX450 23-25 0506-2397 KTM 250 SX 23-25 0506-2385 250 SX-F 23-25 0506-2386 250 XC 23-25 0506-2385 250 XC-F 23-25 0506-2386 FITS MODEL PART NO. KTM (CONT) 300 XC 23-25 0506-2385 300 XC-W 23-25 0506-2385 300 XC-W Hard Enduro 25 0506-2385 350 EXC-F 24-25 0506-2386 350 SX-F 23-25 0506-2386 350 XC-F 23-25 0506-2386 350 XW-F 24-25 0506-2386 450 SX-F 23-25 0506-2386 450 XC-F 23-25 0506-2386 450 XCF-W 23-25 0506-2386 500 EXC 24 0506-2386 500 EXC-F 24-25 0506-2386 500 XW-F 24 0506-2386 690 Enduro R 09-25 0506-2393 SUZUKI DR-Z125/L 03-25 0506-2389 YAMAHA YZ250F 24-25 0506-2391 WR450F 24-25 0506-2392 YZ450F 23-25 0506-2392 YZ450FX 24-25 0506-2392
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 2 MAY 2025 PARTSCANADA.COM POWERCORE 4 SLIP-ON MUFFLERS • Hi-Flo end cap boosts allaround performance • Computer designed and dyno-tested for every 4-stroke application • Enhanced sonic evacuation delivers a higher flow of exhaust gases, which increases power • A stainless steel mid-pipe mates to the computer-designed rear can for lightweight durability • Round perforated steel inner cores make for optimum flow, using hi-flo technology • FMF’s exclusive cross-weave internal packing provides longevity and maximum sound dispersion • Elliptical aluminum can offers strategic sizing for superior performance • Optional Quiet Core insert will provide a decrease in sound level if desired • Features a screen-type spark arrestor that does not interrupt exhaust flow or performance, unless noted FITS MODEL DESCRIPTION PART NO. EMIS* KAWASAKI KLR650 08-18 Spark arrestor slip-on muffler 1811-2614 3 FITS MODEL PART NO. EMIS* SUZUKI RM250 04-08 1820-0169 3 GOLD SERIES GNARLY™ PIPES • Power gains are focused toward bottom and mid, with a goal of increased tractability • An excellent offroad pipe, and a winner for tighter tracks • Built with tough 18-gauge steel FITS MODEL PART NO. EMIS* HUSQVARNA TC/TE 250, TE/TX 300 17-18 1821-1787 3 KTM 250 SX/XC, 300 XC 17-18, 250/300 EXC 18-19 1821-1787 3 TURBINECORE 2 SPARK ARRESTOR SILENCERS • Straight-through design of the spark arrestor canister and the Performance Flow stainless steel end cap ensure strength, durability and unrestricted power
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 3 PARTSCANADA.COM MAY 2025 ODI BEND A - WIDTH (MM) B - HEIGHT (MM) C - RISE (MM) D - CLAMP (MM) E - SWEEP (MM) F - CONTROL LENGTH (MM) PART NO. Schoolboy 779 88 53 140 50 200 0601-6802 Super-mini 770 118 83 125 42 200 0601-6801 RC-High 805 120 82 158 54 200 0601-6800 CFT PODIUM MX HANDLEBARS • Utilizes Controlled Flex Technology (CFT) crossbar; allows the handlebar to naturally flex at a controlled rate which provides reduced vibration and rider fatigue • CFT crossbar features built-in elastomer for lower vibration • Constructed of high-strength seamless double-butted 2014-T6 alloy • Handlebar has been shot-peened and hard anodized for improved durability • Oversized 11/ 8” clamp diameter improves bar/clamp grip; requires “oversized” triple clamps or bar mounts • Lightly-knurled left slide helps with grip bar adhesion, without interfering with lock-on grips • Includes injection-molded high-density ODI crossbar pad • RC4 signature series (Part no.06014838) designed and developed by Ricky Carmichael, features exclusive bend and signature edition crossbar pad and graphics ODI BEND COLOUR A - WIDTH (MM) B - HEIGHT (MM) C - RISE (MM) D - BASE (MM) E - SWEEP (MM) F - CONTROL LENGTH (MM) PART NO. MX BARS Hon/Kaw OE Black 802 99 65 165 54 200 0601-6796 PODIUM 7/ 8” HANDLEBARS • Constructed of 7075 alloy for added strength • 7/ 8” diameter to work on many OEM, mini and ATV clamp diameter • Laser-etched ODI graphics • Knurled left slide helps with grip bar adhesion • Includes black crossbar pad 0601-6800 0601-6796
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 4 MAY 2025 PARTSCANADA.COM HALF-WAFFLE ATV V2.1 LOCK-ON™ GRIPS • The original Lock-On™ grip and the ultimate ATV motocross grip for control and traction • Slim diameter: 30.5 mm with rugged knurl pattern for improved feedback and control • Original MX Half-Waffle pattern for maximum traction at the fingertips • Full-size flange delivering a full moto feel • Grips fit onto 7/ 8” controls • Lock-On clutch and throttle side grips provides simple installation and removal • Billet-alloy clamps deliver 100% slip-free performance guaranteed • Knockout ends easily accommodate full-wrap handguards • 125 mm L • Sold in pairs DESCRIPTION PART NO. Safety wire 0633-0034 SAFETY WIRE • Used to secure glue-on grips, lock-wire bolts and other fasteners • Aircraft grade 0.032 in diameter stainless steel safety wire • High-quality 304 stainless steel resists corrosion and rust • Tested and used by top motorcycle racers and mechanics • Convenient 50’ easy access spool DESCRIPTION PART NO. Mud knuckle kit 0630-3350 MUD KNUCKLE KIT • Designed to mount to the front of any motocross grip for added control in wet/ muddy conditions • Injection molded in-house at ODI and includes 8 safety-wire slots to perfectly secure to the front side of your grips • 100 mm (4”) L • Includes: 2 mud knuckle injection molded traction strips and (8) 6” strands of stainless steel safety wire • Sold in pairs BLACK 0630-3285 BLUE 0630-3286 GREY 0630-3288 GRAPHITE 0630-3289 RED 0630-3287 WHITE 0630-3290 DESCRIPTION PART # Black 0630-3285 Blue 0630-3286 DESCRIPTION PART # Graphite 0630-3289 Grey 0630-3288 DESCRIPTION PART # Red 0630-3287 White 0630-3290
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 5 PARTSCANADA.COM MAY 2025 FITS MODEL COLOUR PART NO. CRF250/450R 25 Red 1403-4141 Red/black 1403-4138 White 1403-4140 Black 1403-4139 FITS MODEL COLOUR PART NO. CRF250/450R 25 Red 0520-4145 White 0520-4144 Black 0520-4143 FITS MODEL COLOUR PART NO. CRF250/450R 25 Red 0520-4148 Red/black 0520-4149 White 0520-4147 Black 0520-4146 FITS MODEL COLOUR PART NO. CRF250/450R 25 Red 0520-4123 White 0520-4122 Black 0520-4121 REPLACEMENT PLASTIC FOR HONDA • Colour-matched to OEM or in optional works colours • Injection-molded plastic for precise fit and finish • Five-piece replica kits include front fender, rear fender, radiator scoops, side panels and Stadium number plate 0520-4149 0520-4143 0520-4123 1403-4138 FIVE-PIECE REPLICA KITS REPLICA RADIATOR SHROUDS SIDE PANELS STADIUM NUMBER PLATES
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 6 MAY 2025 PARTSCANADA.COM VORTEX HANDGUARDS • CNC-machined 6061 billet aluminum Vortex bars and abrasion guards • Large area to accommodate hands and levers • Includes universal U-Clamp for mounting • Powergrip bar ends fit steel and alloy bars • Fit 7/ 8” and 1 1/ 8” handlebars BLACK 0635-2676 BLUE 0635-2680 ORANGE 0635-2677 WHITE 0635-2679 RED 0635-2678 FORK SIZE BEND PART NO. 41 mm 7° 0601-6814 50 mm 7° 0601-6770 51 mm 7° 0601-6815 53 mm 7° 0601-6816 55 mm 7° 0601-6817 LENGTH PART NO. 10.25” 0601-6771 ZERO OFFSET 7° VORTEX CLIP-ON HANDLEBARS • Vortex Clip-Ons are an economical replacement handlebar with amazing strength • Machined from solid billet with a removable handlebar • Handlebar tube can be replaced without buying an entire new clip-on assembly because handlebar is not welded to clamp • Clamp is CNC machined from a solid block of 7075 T-6 aluminum • 7° bend • Available in black • Machined plastic bar ends and stainless steel fasteners • Kit includes both collars, two handlebar tubes with plastic ends and high tensile strength fasteners • Order by size of fork tube • Made in the U.S.A. NOTE: Clip-ons are not an OEM replacement, and this chart is intended for reference purposes only. 0601-6814 CLIP-ON SETS REPLACEMENT PARTS DESCRIPTION PART # Black 0635-2676 Blue 0635-2680 DESCRIPTION PART # Orange 0635-2677 Red 0635-2678 DESCRIPTION PART # White 0635-2679
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 7 PARTSCANADA.COM MAY 2025 FITS MODEL PART NO. Rearsets 1623-0636 REARSETS FOR KAWASAKI ZX-4RR 23-24 • Laser-engraved adjustment system • Rotating foot peg and toe peg adjustment • Foot peg unbolts from the front for easy removal • 3D-machined heel guards help prevent boot interference • Bearing-supported levers X30 BULLET MIRRORS • Over 30 mm linear adjustment • Precision-machined components for increased stability • Ball and socket design for reduced vibration • 6061 aluminum construction • Laser-engraved Vortex logo • Universal left or right side application • Available for 7/ 8” or 1” diameter handlebars DESCRIPTION PART NO. 7/8” clamp 0640-1816 1” clamp 0640-1818 X30 ROUND MIRRORS • Over 30 mm linear adjustment • Precision-machined components for increased stability • Ball and socket design for reduced vibration • 6061 aluminum construction • Laser-engraved Vortex logo • Universal left or right side application • Available for 7/ 8” or 1” diameter handlebars 0640-1816 0640-1818 0640-1819 0640-1817 DESCRIPTION PART NO. 7/8” clamp 0640-1817 1” clamp 0640-1819
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 8 MAY 2025 PARTSCANADA.COM TORQDRIVE® CLUTCH PACKS • A high-performance manual clutch is now more accessible than ever with the TorqDrive® Clutch Pack • It’s as easy as changing your clutch plates into your OEM components • Proven at the highest levels of racing, TorqDrive thin friction disk technology allows more disks to fit in your OEM clutch’s footprint, decreasing slip and unlocking the full power of your engine • TorqDrive Technology also provides increased clutch life and decreased clutch fade • The additional friction disks provide an average of a 25% gain in torque capacity over stock, while reducing lever pull by an average of 10% (figures vary by model) • TorqDrive delivers stronger drive throughout the powerband, unlocking the bike’s power without any expensive motor mods • Rekluse basket sleeves eliminate basket wear and notching NOTE: Not a replacement clutch pack for RadiusX, RadiusCX, or Core Manual TorqDrive®. FITS MODEL PART NO. BMW F650/700GS Twin 09-18 1130-0397 F800R 09-17, F800ST 07-12, F800GT 13-16, F800S 07-10 1130-0397 F800GS 09-18, F800GS Adventure 14-18 1130-0397 1130-0581 All Rekluse clutch products are precision-engineered and made of high-quality materials to provide the best in performance and durability. Their components are stronger, lighter, longer-lasting and built for maximum performance. Rekluse’s industry-leading auto clutches are optimized for each bike model as it comes from the factory and they’ve designed each clutch to be fine-tuned for every rider. Rekluse’s manual clutches deliver unprecedented performance, tuning and durability with a design that provides more discs in less space, allowing up to four additional friction discs over stock. RADIUSX CLUTCH KITS • With RadiusX a high-performance auto clutch is just a clutch pack swap away • RadiusX combines TorqDrive friction disc technology with Rekluse’s innovative EXP (auto clutch) disc • TorqDrive provides more clutch discs in less space, delivering high-performance auto function within the framework of the stock clutch • The RadiusX clutch prevents engine stalls so you can focus on the ride and let the auto clutch do the rest • RadiusX delivers increased power transfer over OEM and longer clutch life with less adjustment over time • Standard clutch lever function is retained and full override • Some configurations include Rekluse basket sleeves to prolong basket life FITS MODEL PART NO. SUZUKI GSX1300R Hayabusa 08-20 1130-0880 YAMAHA FZ-07 14-17, MT-07 14-24, Tenere 700 19-24, XSR700 15-22 1130-0406 FJ-09 17, MT-09 18-21, Tracer 900/GT 19-20, XSR900 17-21 1130-0582 1130-0406 1130-0582 1130-0397 FITS MODEL PART NO. SUZUKI GSX-R600/750 08-25 1131-3735 YAMAHA FJ-09 17, FZ-09, MT-09 18-22, MXT9 Niken 19-20, Tracer 900/GT 19-24, XSR900 17-24 1130-0581
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 9 PARTSCANADA.COM MAY 2025 PART NO. DESCRIPTION 0510-0735 Bolt-on kick stands BOLT-ON KICK STANDS • Powdercoated steel shaft and sturdy 1/4” steel mounting bracket make a lightweight, yet heavy-duty stand • Perfect for those unexpected rest stops along the trail • Easy installation and removal with only two bolts (included when necessary) • High-tension steel spring FITS MODEL PART NO. POLARIS ACE 900 16-19 0713-0297 Ranger 900 (all gas models) 13-19 0713-0297 RZR 900 (all) 11-25 0713-0297 General 1000 (all) 16-25 0713-0298 Pro XD Full-Size (all gas models) 22-25 0713-0297 Ranger 1000 (all gas models) 17-25 0713-0297 RZR Pro XP (all) 20-25 0713-0298 FITS MODEL PART NO. RZR Turbo (all) 16-24 0713-0298 RZR 1000 (all) 14 0713-0297 RZR 1000 (all built 08/04/14 and before) 15 0713-0297 RZR 1000 (all built 08/05/14 and after) 15 0713-0298 RZR 1000 (all) 16-25 0713-0298 RZR RS1 (all) 18-22 0713-0298 Xpedition 1000 (all) 24-25 0713-0298 OIL COOLERS • Direct OEM replacement DESCRIPTION PART NO. Clutch cover 0940-1980 CLUTCH COVER FOR KTM 950 ADVENTURE 02-06, 950 SUPERENDURO 06-09, 990 ADVENTURE 06-13, 990 SMR 10-13 • Specifically engineered to provide unparalleled durability and performance in a single, stylish component • Ready to ride whenever you are, standing up against rocks, logs, boots and whatever else you may encounter in your adventures • Billet aluminum construction provides incredible strength • Double hard anodized to further enhance durability and wear resistance • Has a greater depth than OEM designs, allowing increased oil capacity CORE EXP CLUTCH KIT FOR YAMAHA WR250R 08-20, WR250X 08-11 • Core EXP 3.0 is a centrifugal auto clutch featuring Rekluse’s EXP (auto clutch) technology • Full clutch control and use of the lever is retained for a no-compromise riding experience • Core EXP 3.0 offers dead-on clutch engagement every time and allows riders to take off and stop in gear without using clutch lever • With Core EXP 3.0, you’ll confidently navigate traffic and slow-speed conditions • Rekluse’s billet center hub and pressure plate convert the clutch to six coil springs, which improves lever feel, clutch performance and durability • Increased oil passages in the center hub and pressure plate move more oil through the clutch, decreasing operating temperatures and increasing clutch life • Installing Core EXP 3.0 does not require modification to stock components • Shifting the transmission remains unchanged (clutch lever use is recommended for shifting) DESCRIPTION PART NO. Core EXP clutch kit 1130-0400
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 10 MAY 2025 PARTSCANADA.COM DESCRIPTION PART NO. 10W-40, 1 QT. BOTTLE 3601-0917 10W-40 SYNTHETIC OIL • Minimizes friction and maximizes power transfer, squeezing every ounce of performance from your 2- or 4-stroke engine • Thrives under extreme pressure, protecting your engine for extended life and countless miles • Engineered for high-performance Japanese motorcycles, this oil stands firm against extreme temperatures • Delivers viscosity across temperatures, ensuring maximum power • Available in 1 qt. bottles, 12 per case • Made in the U.S.A. DESCRIPTION PART NO. 10W-50, 1 QT. BOTTLE 3601-0918 10W-50 SYNTHETIC OIL • Delivers unwavering performance for your 4-stroke across temperatures • Engineered for high-performance, high-torque European built machines • Handles extreme heat with ease, preventing thermal breakdown and ensuring smooth operation • Protects against molecular shearing, extending 4-stroke European built engine life • Available in 1 qt. bottles, 12 per case • Made in the U.S.A. DESCRIPTION PART NO. 15W-50, 1 QT. BOTTLE 3601-0919 15W-50 SYNTHETIC OIL • Delivers unwavering performance across temperatures • Engineered for high-performance, imported machines • Handles extreme heat with ease, preventing thermal breakdown and ensuring smooth operation • Designed to defend advanced European engines • Protects against molecular shearing, extending 2-stroke European built engine life • Available in 1 qt. bottles, 12 per case • Made in the U.S.A. DESCRIPTION PART NO. 10W-40, 1 QT. BOTTLE 3601-0916 MINERAL 10W-40 OIL • Crafted to handle the toughest conditions • Delivers dependable performance and protection for your Japanese made motorcycle, mile after mile • Maintains viscosity for optimal lubrication in 2- and 4-stroke engines, even in the most demanding environments • Minimizes friction and optimizes power delivery, ensuring a responsive ride without sacrificing reliability • Available in 946 ml 1 qt. bottles, 12 per case • Made in the U.S.A.
RkJQdWJsaXNoZXIy NDI5NTY=