THE DRAG SPECIALTIES OCTOBER 2025 DRAGSPECIALTIES.COM OCTOBER 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 49-STATE 1810-3259 Brushed stainless 2 1810-3260 Guardian black 2 PART # DESCRIPTION EMIS* RACE ONLY 1810-3256 Brushed stainless 3 1810-3258 Guardian black 3 QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Inspired by the S&S King Of The Baggers racing efforts • Stainless steel stepped header design to maximize power output • Full-length heat shields on front and rear header pipes • Race-inspired S&S end cap • Left side saddlebag support included • Removable dB reducer (J2825 compliant) • Made in the U.S.A. 1810-3258 1810-3259 FOR 20-25 CHALLENGER, 22-25 PURSUIT AND 25 CHIEFTAIN/ROADMASTER W/ POWERPLUS MOTOR
2 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 25 FXLRST/FLHC 1800-2742 Chrome 3 1800-2743 Black 3 1800-2744 Stainless steel 3 THE RIPPER 2-INTO-1 SHORT EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M-Eight Softail exhaust systems • Stepped 13/ 4” to 1 7/ 8” headpipes • Fully welded one-piece design • Performance baffle core • Full heat shields • Megaphone muffler • Angle cut end cap • 18 mm O2 bungs with 12 mm adapters • Made in the U.S.A. 1800-2743 1800-2742 1800-2744
3 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 25 FXLRS/FXLRST, FXBB, FLHC 1801-1858 Chrome 4 1801-1859 Black 4 4” SLIP-ON MUFFLER • 4” OD diameter slip-on muffler features 16-gauge steel construction and removable flow-through baffle • Bolt to stock locations with supplied hardware • Sold each • Made in the U.S.A. 1801-1859 1801-1858
4 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS KOLOR FLARE® WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop • Windshields are crafted from acrylic • Ice Kolor Flares® feature a vibrant fluorescent edge to give your motorcycle a little extra pop • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0957 2310-0946 2310-0948 2310-0950 2310-0952 2310-0954 2310-0956 2310-0947 2310-0949 2310-0951 2310-0955 PART # DESCRIPTION ICE KOLOR FLARE® 2310-0950 6.5” blue ice 2310-0949 6.5” green ice 2310-0947 6.5” orange ice 2310-0946 6.5” pink ice 2310-0948 6.5” yellow ice KOLOR FLARE® 2310-0955 6.5” blue PART # DESCRIPTION KOLOR FLARE® (CONT) 2310-0957 6.5” bronze 2310-0954 6.5” green 2310-0952 6.5” orange 2310-0956 6.5” purple 2310-0951 6.5” red 2310-0953 6.5” yellow 2310-0953
5 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0801-1983 Smooth, solar-reflective leather 0801-19791 Smooth, vinyl 0801-19801 Double diamond, black thread PART # DESCRIPTION 0801-19811 Double diamond, silver thread 0801-19821 Double diamond, red thread EXTENDED REACH FREEDOM TOURING SEATS • Moves the rider back 1” to 13/ 4’’ inches compared to stock seats; 1” on FLHX/ FLTRX models, 11/ 2” on FLHR models and 1 3/ 4” on FLHTCU models • Features solar-reflective leather in the seating area and high-quality automotive-grade vinyl on the sides (unless noted) • Features a 6” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Made to accept Drag frame-mounted backrests, sold separately • Includes all mounting hardware • Made in the U.S.A. FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 09-23 FLHT/FLTR/FLHX/FLHR (EXCEPT 23 FLHXSE/FLTRXSE), 09-25 FLHTCUTG; 301/2” L OVERALL (15” W FRONT X 13” W REAR) 0801-1983 0801-1979 0801-1980 0801-1981 0801-1982 1 Not solar-reflective leather.
6 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 25 FLHXU, 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLTRX/FLTRXSTSE 3501-2125 Saddlebag bottoms, gloss black 3501-2126 Saddlebag bottoms, matte black 3501-2127 Saddlebag lids, gloss black 3501-2128 Saddlebag lids, matte black PART # DESCRIPTION FOR 14-24 FLHTK/FLTRK, 17-25 FLHRXS, 14-23 FLHT/FLHR/FLHX/FLTRX (EXCEPT 23 FLHXSE/FLTRXSE) 3501-2121 Saddlebag bottoms, gloss black 3501-2122 Saddlebag bottoms, matte black 3501-2123 Saddlebag lids, gloss black 3501-2124 Saddlebag lids, matte black CARBON FIBER SADDLEBAGS AND LIDS • Gives your bagger race-machine style • Pre-preg 3K full twill carbon fiber construction • Vacuum bagged and autoclave cured to aerospace/military spec standards • Lightweight, rigid and built with strength for real-world use • Saddlebag bottoms and lids are sold in pairs; must order one set of each for a complete set of bags 3501-2125 3501-2123 PART # DESCRIPTION EMIS* 1010-3383 Chrome 2 1010-3384 Black anodized w/ machined accents 2 1010-3387 Blue anodized 2 PART # DESCRIPTION EMIS* 1010-3385 Gold anodized 2 1010-3386 Red anodized 2 STAGE II OVAL AIR CLEANERS • Feature an oval shape and an open face filter design for maximum airflow • Low profile design for ample legroom • Radius design backing plate engineered for horsepower and torque through unobstructed airflow • Performance black pre-oiled air filter features a high flow pleated top and pleated perimeter to take in airflow from all directions resulting in increased performance • Air filter is washable and reusable • Includes backing plate assembly, air filter, outer cover assembly and all necessary hardware 1010-3383 1010-3384 1010-3385 1010-3387 1010-3386 FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL
7 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 1020-4287 For 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 25 FXBB/FXBR/FXLRS/FXLRST/FLHC/FLFB/FLSTFI 2 POWER VISION 4 • Flash tunes to your ECU – no setup required, just create an account, select your tune, flash and enjoy the ultimate ride • Access to a vast database of pre-loaded tunes for different configurations • Easily download and manage pre-loaded and custom tunes • Record real-time engine data and display in WinPEP 8 Data Center • Optimized for remote tuning so you can easily ride, record and share data logs and tunes • Read, review, clear and share diagnostic trouble codes (DTCs) with built-in descriptions • Supports licensing additional vehicles • Return to stock at any time, your original factory tune is safely backed up on the cloud and on your phone • See Dynojet website: http://www.dynojet.com/ powervision-tune-license-programs.aspx for information about purchasing PART # DESCRIPTION EMIS* 1020-4288 For 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 25 FXBB/FXBR/FXLRS/FXLRST/FLHC/FLFB/FLSTFI 2 POWER VISION 3 • Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU • Display vehicle data channels in real-time • Weather-resistant for use in all conditions • High-contrast display, viewable in direct sunlight • Fueling revised for maximum power and torque • Spark timing optimized for 91-93 octane fuel • Rev limit raised • Speed limit raised • Made in the U.S.A. NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. additional Power Vision tune licenses • Made in the U.S.A. NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes. PART # DESCRIPTION FOR KING TOUR-PAK® 0822-0498 Plain 0822-0592 HC FOR CHOPPED TOUR-PAK 0822-0551 Plain 0822-0553 Black LS 0822-0597 HC ROADSOFA™ TOUR-PAK® BACKREST PADS • Integrate the look of your Saddlemen® seat with your Tour-Pak® • Each complete Tour-Pak pad is built on a strong, rigid base pan and includes all the hardware you need for easy installation • Constructed from durable, comfortable Saddlehyde™ material • Multiple stitch patterns and designs to match your rider’s saddle • Made in the U.S.A. FOR DRESSER/TOURING 0822-0498 0822-0551 0822-0553 0822-0592 0822-0597 FOR 14-24 FLHX/FLHR/FLTR/ FLTRU/FLTRK/FLTRX/FLHT
8 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 0925-1629 Chain drive 3 0925-1630 Gear drive 3 GRIND VALVE TIMING INTAKE VALVE TIMING EXHAUST VALVE DURATION INTAKE VALVE DURATION EXHAUST VALVE LIFT INTAKE VALVE LIFT EXHAUST LOBE CENTER LINE INTAKE LOBE CENTER LINE EXHAUST VALVE LIFT @TDC INTAKE VALVE LIFT @TDC EXHAUST HPT496C/G 496C 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” 496G 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” HPT496 CAM KITS FOR M-EIGHT • Bolt-in design • Available in chain drive or gear drive • Compatible with stock or S&S rocker arms and springs • Compatible with round or oval port valve springs • Boosts horsepower and torque • Racy, aggressive lope at idle PART # DESCRIPTION EMIS* 0925-1631 Chain drive 3 0925-1632 Gear drive 3 GRIND VALVE TIMING INTAKE VALVE TIMING EXHAUST VALVE DURATION INTAKE VALVE DURATION EXHAUST VALVE LIFT INTAKE VALVE LIFT EXHAUST LOBE CENTER LINE INTAKE LOBE CENTER LINE EXHAUST VALVE LIFT @TDC INTAKE VALVE LIFT @TDC EXHAUST HPT496C/G 496C 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” 496G 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” HPT 496 CAMS FOR M-EIGHT • Available in chain drive or gear drive styles • Compatible with stock or S&S rocker arms and springs • Compatible with round or oval port valve springs • Boosts horsepower and torque • Racy, aggressive lope at idle 0925-1631 0925-1629 0925-1630 • Kits include all required bearings, gasket and O-rings and hardware • Made in the U.S.A. NOTE: Not for use with VVT models. NOTE: 0.496” lift when used with S&S rocker arms. • Made in the U.S.A. NOTE: Not for use with VVT models. NOTE: 0.496” lift when used with S&S rocker arms. NOTE: Gears for gear drive cam sold separately, see the 2025 Drag Specialties FatBook. FOR 17-25 M-EIGHT (EXCEPT VVT MODELS) FOR 17-25 M-EIGHT (EXCEPT VVT MODELS)
9 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 1131-3979 For 17-25 M-Eight 1131-3980 For 07-17 Twin Cam REPLACEMENT RADIUSCX CLUTCH PACKS • Replacement clutch pack for Rekluse RadiusCX auto clutch only • Includes TorqDrive® friction disks, steel drive plates, EXP bases (two halves) and PTFE pads for wedge service • Not compatible with other Rekluse auto clutch systems • Made in the U.S.A. PART # DESCRIPTION 1131-3972 For 07-24 Big Twin REPLACEMENT APEX CLUTCH PACK • Replacement clutch pack for Apex clutch only • Includes (17) TorqDrive® friction plates, (18) 12-pin drive plates and (12) basket sleeves. • Made in the U.S.A. 1131-3980 1131-3979
10 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS ÖHLINS Öhlins suspension has been a cornerstone of motorcycle and motorsports top level suspension systems for more than 45 years. The STX line of shock absorbers for M-Eight Softails offer a dramatic suspension performance upgrade that boosts rider confidence and improves the quality and comfort of the ride. PART # LENGTH ADJUSTABLE RATE N/MM STROKE SUG. RIDER WEIGHT FOR 18-19/25 FLFB, 18-24 FLFBS, 18-20 FLDE, 18-21/25 FLHC, 18-24 FLHCS, 18-21 FLSB/FLSL, 18-20/22/25 FXBB, 21-24 FXBBS, 18-19/22-25 FXBR,19-20 FXDRS,18-19 FXFB, 18-21/23 FXFBS,18-20 FXLR, 20-25 FXLRS, 22-25 FXLRST, 22 FXRST, 20-24 FXST 1310-2521 13.5” Preload, rebound 115 2.244” 170 to 250 lbs. STX PRO SHOCK • STX single-tube design • Monotube shock with hose-mounted external shock reservoir • High-pressure nitrogen gas-charged • 46 mm piston diameter • Adjustable rebound damping • Hose-mounted hydraulic preload adjuster • Top-level comfort, rideability, and performance • Hard-anodized precision CNC-machined components • Low-friction shaft and shock seal head design • Fully serviceable and rebuildable • Sold each
11 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # LENGTH ADJUSTABLE RATE N/MM STROKE SUG. RIDER WEIGHT FOR 18-19 FXFB, 18-21 FLHC, 18-21/23 FXFBS, 18-24 FLHCS, 22 FXBBS 1310-2402 13.5” Preload 105 2.244” 170 to 250 lbs. FOR 18-19 FXBR/FLFLB, 18-20 FXBRS, 18-21 FLSB, 18-24 FLFBS, 19-20 FXDRS, 23-24 FXBR 1310-2401 12.5” Preload 105 1.713” 150 to 220 lbs. FOR 18-20 FLDE/FXLR/FXBB, 18-21 FLSL, 21/23-24 FXBBS, 22 FXBB, 20-24 FXLRS 1310-2420 12.5” Preload 105 1.713” 150 to 220 lbs. FOR 22-24 FXLRST 1310-2522 13.5” Preload 115 2.244” 170 to 250 lbs. STX SHOCKS • STX single-tube design • Monotube shock with internal reservoir • High-pressure nitrogen gas-charged • 46 mm piston diameter • Hose-mounted hydraulic preload adjuster • Top-level comfort, rideability, and performance • Hard-anodized precision CNC-machined components • Low-friction shaft and shock seal head design • Fully serviceable and rebuildable • Sold each 1310-2401
12 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FRED KODLIN SIGNATURE SERIES FASTBACK™ SEAT • Low-cut, wide driver bucket combined with a rising tail section provides good back support for the operator • Hand-sewn Alcantara® cover features a contrasting-colored diamond stitch pattern in the front and rear center panel • Original Mustang marine-grade vinyl • Wide passenger seating area features a sleek and streamlined profile while still offering comfort for one-piece 2-up riding • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support years after use • Marine-grade fiberglass baseplate for long-lasting support and durability • Driver’s seat area measures 111/ 2” W • Passenger seat area measures 51/ 2” W • Polyurethane bumpers absorb vibration PART # DESCRIPTION 0802-1558 For 18-24 FXBB/FXBBS/FXST PART # DESCRIPTION 0801-1550 For 08-23 FLHT/FLHTCU/FLHTK/FLHTKSE/FLHX/FLHR/FLTR/FLTRU/FLTRK/FLTRX/FLTRXS (except 23 FLHXSE/FLTRXSE) FRED KODLIN SIGNATURE SERIES SQUAREBACK™ SEAT • Features contrasting-color, reverse apex chevron pattern on perforated vinyl • Split-panel, gripper vinyl cover for stability and performance • Riders are positioned slightly further back compared to stock • High-rising wall allows the rider increased lower back support • Driver’s seat area measures 10 1/ 2” W • Carefully curated 6 1/ 2” wide tail section provides a stylish look and ample comfort for 2-up riding • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long lasting support and durability • Polyurethane bumpers to absorb vibration FOR DRESSER/TOURING
13 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FOR SOFTAIL FASTBACK SEAT • Super-clean, custom-style, cut low with good back support for the rider • Offers a reasonable degree of passenger comfort • Top covering made of highest quality expanded vinyl • Marine-grade fiberglass baseplate EXTREME FASTBACK™ SEAT • A low-cut driver bucket is paired with a tall tail section for incredible back support, while giving a mean racing-cowl look, uniquely styled for the lines of the Fat Boy • Hand-sewn cover features a double-diamond pattern in front with a perforated-look vinyl on the 7” wide rear • 11.5” wide bucketed rider area provides excellent support in a low-profile, sporty package, with a 7” wide rear section • Handsewn cover with double-diamond and perforated accents made from marine-grade expanded vinyl • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • Made in U.S.A. SQUAREBACK™ 2-UP SEATS • Delivers an updated style to a classic look for HD • A low-cut 11.5” driver bucket rises to meet the squared-off passenger section, offering good back support • The generous width of the passenger section gives great support for two-up riding while maintaining a sporty look • Handsewn cover features a Tuck and Roll pattern in front with carbon fiber accents in the driver area and the rear • Handsewn cover with Tuck and Roll pattern and carbon fiber accents made from marine-grade expanded vinyl • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration PART # DESCRIPTION FOR 18-23 FXBBS/FXST 0802-1509 Double-diamond stitch, 29 cm (11.5”) W front, 14 cm (5.5”) W rear PART # DESCRIPTION FOR 18-23 FLFB/FLFBS 0802-1508 Black PART # DESCRIPTION FOR 18-20 FXBR/FXBRS 0802-1507 11.5” W driver; 8.5” W rear FOR 18-23 FXFB/FXFBS 0802-1506 11.5” W driver; 7.5” W rear
14 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 0630-3391 Chrome 0630-3392 Black FOR 17-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 09-25 H-D FL TRIKE, 16-24 SOFTAIL, 20-23 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-3389 Chrome 0630-3390 Black FOR 99-17 TWIN CAM AND 86-22 XL (EXCEPT 08-17 DRESSER/H-D FL TRIKE, 16-17 SOFTAIL, 16-17 FXDLS, 13-15 FXSBSE, 11-12 FLSTSE AND RH SPORTSTER) 0630-3387 Chrome 0630-3388 Black K25 GRIPS • Super soft, tacky and durable surface • Billet aluminum construction with Kraton rubber grip area • Diamond knurled with closed ends • Small diameter grip helps reduce hand fatigue • Fit 1” handlebars • Sold in pairs 0630-3390 0630-3387 0630-3391 PART # DESCRIPTION FOR 22-24 RH975/975S, 21-24 A1250, 21-24 RH1250S (7/8” TBW CONTROLS) 0630-3189 Black DUAL-CABLE GRIP SET (1” CONTROLS) 0630-2321 Chrome 0630-2320 Black THROTTLE-BY-WIRE GRIP SET (1” TBW CONTROLS) 0630-2323 Chrome 0630-2322 Black FOR CUSTOM DUAL-CABLE THROTTLE APPLICATIONS W/O SWITCH HOUSINGS (1” CONTROLS) 0630-3073 Chrome 0630-3074 Black PART # DESCRIPTION REPLACEMENT SLEEVES (PAIR) 0630-2324 Black 0630-2327 Chocolate 0630-2328 Gray 0630-2326 Oxblood 0630-2325 White ALUMICORE GRIP SETS • Fit 1” handlebars • Forged and CNC-machined from 6061-T6 aluminum • Rubber sleeve is constructed from thermoplastic vulcanizate (TPV) for optimal traction and comfort • TPV is highly UV-resistant and durable while maintaining a soft feel • Available for both dual-cable and Throttle-By-Wire applications • Machined alloy end caps are removable to make replacing rubber grip sleeves fast and easy • Rubber grip tube replacement sets available in black, white, oxblood, chocolate and gray colors 0630-3189 0630-2320 0630-2324 0630-3073 0630-2325 0630-2326 0630-2327 0630-2328
15 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24-25 FLHX, 25 FLHXU, 23-25 FLHXSE (1” DIA. CLAMPING AREA) 0601-6844 0601-6845 12” 36” 15” 9” 0601-6846 0601-6847 14” 36” 15” 9” FOR 24-25 FLTRX, 23-25 FLTRXSE (1-1/4” DIA. CLAMPING AREA) 0601-6848 0601-6849 14” 35” 10-1/4” 8” 0601-6850 0601-6851 16” 35” 10-1/4” 8” EZ INSTALL 11/ 2” FLAT TOP HANDLEBAR KITS • EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and install them on your motorcycle • Handlebars now come wired for your handlebar controls • Our top corner feature is a non-welded corner we machine from billet steel with a smooth internal wire cavity that won’t damage the internal wiring • CNC mandrel-bent from 11/ 2” diameter x 0.095” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship 0601-6844 • Available in chrome or gloss black powdercoated finish • Gloss black bars come with black brake line/cable extensions • Chrome bars come with braided brake line/cable extensions • Made in the U.S.A. NOTE: Our handlebar kits do not replace existing lines and cables. We extended them. NOTE: Accepts OEM heated grips. U.S. Patent # 10,946,926. 0601-6851
16 OCTOBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION TOP 0408-0452 Chrome 0408-0451 Black PART # DESCRIPTION BOTTOM 0408-0454 Chrome 0408-0453 Black TRIPLE TREES • 6061-T6 aluminum construction • Two mounting locations for risers: stock and 1.35” closer to the rider • Remove the block off plate and use your OEM steering lock and key w/ no other pieces needed • Comes with billet stem cap and bolt • Riser bushings not required • Hardware included • Made in U.S.A. NOTE: Not compatible with CVO or CVO ST models. PART # DESCRIPTION FOR 14-24 FLHT/FLHX/FLHR/FLTR 1303-0394 Black anodized PART # DESCRIPTION FOR 14-24 FLHT/FLHX/FLHR/FLTR (CONT) 1303-0393 Raw machined SWINGARM PIVOT BLOCKS • Weighs less than half that of stock pivot block • CNC machined 6061 T-6 aluminum • Designed to OEM specs • Hardware not included • Made in the U.S.A. PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2030-2419 Chrome PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (CONT) 2030-2420 Black CURVED LICENSE PLATE FRAME KIT WITH LED PLATE LIGHT • Aluminum frame and backing plate with curved design and integrated bright white LEDs • Plug-and-play installation • Fits standard 4” H x 7” W license plate 1303-0393 1303-0394 0408-0451 0408-0452 0408-0454 0408-0453 2030-2420 2030-2419 FOR 24-25 FLTRX
17 DRAGSPECIALTIES.COM OCTOBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 18-24 FXLRST/FXBB/FXBBS/FXBR/FXBRS/FXST 0602-1426 Black, 6” rise 0602-1425 Black, 8” rise 0602-1424 Black, 10” rise 0602-1522 Bronze, 6” rise 0602-1521 Bronze, 8” rise 0602-1520 Bronze, 10” rise FOR H-D MODELS WITH 3 1/2” ON-CENTER RISER MOUNTS 0602-1460 Black, 6” rise PART # DESCRIPTION FOR H-D MODELS WITH 3 1/2” ON-CENTER RISER MOUNTS 0602-1459 Black, 8” rise 0602-1458 Black, 10” rise FOR 22-24 FXLRS AND H-D WITH 3 1/2” ON-CENTER HANDLEBARS USING THE FXLRS ROUND GAUGE OR KOSO H-D 04 SPEEDO (PART #2211-0172) 0602-1463 Black, 6” rise w/ gauge bucket 0602-1462 Black, 8” rise w/ gauge bucket 0602-1461 Black, 10” rise w/ gauge bucket FASTBACK RISER KITS • CNC machined from billet aluminum • Fits handlebars with 1” center diameter • Available in black or bronze finish • Stainless hardware and zip ties included • Fits with digital instrument cluster NOTE: Recommend using with solid riser bushings PART #0602-1434. 0602-1463 0602-1459 0602-1426 0602-1425 OVAL AIR CLEANER FOR M-EIGHT ENGINES • Made from CNC-machined billet aluminum • Comes in black or chrome finish • High performance washable K&N air filter for up to 50% more airflow is included • Clean look with hidden bolts design • Sold as kit; all hardware included NOTE: 49-state U.S.A. EPA-compliant. PART # DESCRIPTION EMIS* FOR 24 FLHX/FLTRX/FLTRXSTSE AND 23-24 FLHXSE/FLTRXSE 1010-3206 Black 2 1010-3207 Chrome 2 PART # DESCRIPTION EMIS* FOR 24 FLHTK/FLTRK/FLHRXS, 17-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/ FLTRXSE), 17-24 H-D FL TRIKE, 18-24 SOFTAIL 1010-3198 Black 2 1010-3199 Chrome 2 1010-3206 1010-3199
RkJQdWJsaXNoZXIy NDI5NTY=