THE DRAG SPECIALTIES NOVEMBER 2025 DRAGSPECIALTIES.COM DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION PART # 30K COMMUNICATORS Single unit 4402-0926 Dual pack 4402-0927 ACCESSORIES Clamp Kit Slim 20 EVO 4402-0772 Slim Speakers 20S EVO 4402-0773 Universal helmet clamp kit w/ slim speakers (for use with Harley Davidson® CB radio) 4402-0777 30K MESH INTERCOM™ • Stay connected with your group as Mesh Intercom™ technology automatically searches for and reconnects to lost and dropped signals • Dual antennas and processors allow for simultaneous connections to 5.0 Bluetooth® and Mesh Intercom technology, making it easier to connect to large groups • Communicate with up to 4 riders using Bluetooth intercom, up to 24 riders using Group Mesh intercom™ at a range of up to 2 km (1.2 mi.) • With five or more riders connected, Mesh Intercom will keep the group connected at a range of up to five miles • Guests can also join and listen • Connects via Bluetooth or the Sena RideConnected App • Multitask by talking via the Mesh Intercom technology and listen to GPS navigation, or take phone calls via Bluetooth connection • Smoother listening experiences from audio that overlays instead of interrupts • Control the headset with the optional handlebar remote (sold separately) or hands-free by utilizing voice commands • Twenty minutes of charging gives you five hours of Bluetooth intercom use or 3 hours of of Mesh Intercom use • Firmware upgradeable • Updated version of the 30K Mesh Intercom with HD speakers (PART #s 4402-0896 and 4405-0897) • Dual-pack kit includes two single kits in one box SINGLE KIT INCLUDES 1- Bluetooth® headset main unit 1- Universal helmet clamp 1- Wired boom microphone 1- Wired microphone 1- Hook-and-loop fastener for boom microphone 1- Hook-and-loop fastener for wired microphone 2- Microphone sponges 1- Glued surface mounting adapter 2- Foam speaker covers 4- Speaker pads 2- Hook-and-loop fasteners for speakers 1- Boom microphone holder 1- Hook-and-loop fastener for holder 1- 2.5 to 3.5 mm audio cable 2- Rubber pads 1- Allen wrench 1- Speaker port cover 1- USB Power & Data Cable 1- Cigarette charger 4402-0926 4402-0772
2 NOVEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FOR SOFTAIL PART # DESCRIPTION FOR 18-24 FXBB/FXBBS/FXST 0802-1561 W/o driver’s backrest 0802-1562 W/ driver’s backrest ROADSOFA™ CF SEATS • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Made with carbon fiber styled inserts and weatherproof, no-maintenancerequired SaddleHyde™ • Includes a fitted rain cover specially designed to protect seat from water and dirt • Available with or without driver’s backrest • Made in the U.S.A. PART # DESCRIPTION FOR 18-24 FXBB/FXBBS/FXST 0802-1559 W/o driver’s backrest 0802-1560 W/ driver’s backrest ROADSOFA™ LS SEATS • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Ventilated soft leather upholstery provides a luxurious look and ride • Made with perforated leather inserts and weatherproof, no-maintenance-required SaddleHyde™ • Includes a fitted rain cover specially designed to protect seat from water and dirt • Available with or without driver’s backrest • Made in the U.S.A. 0802-1562 0802-1560
3 DRAGSPECIALTIES.COM NOVEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS BLACK # CHROME # END RISE OVERALL WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX AND 23-24 FLTRXSE 0601-6661 0601-6662 12-1/2” 33-1/4” 5-1/2” 7-1/6” 0601-6663 0601-6664 15” 33-1/4” 5-1/2” 7-3/8” 0601-6665 0601-6666 17” 33” 5-1/2” 7-5/8” FOR 15-23 FLTRX/FLTRU/FLTRK (EXCEPT 23 FLTRXSE) 0601-6313 0601-6316 12-1/2” 34-1/2” 5-1/2” 7-1/4” 0601-6314 0601-6317 15” 34-1/2” 5-1/2” 7-1/2” 0601-6315 0601-6318 17” 34-1/2” 5-1/2” 7-5/8” FOR 18-24 FXBR, 07-17 FLSTF, 13-17 FXSB/FXSBSE, 08-17 FXDF AND 10-17 FXDWG 0601-6307 0601-6310 12-1/2” 33-1/4” 5-1/2” 7-1/6” 0601-6308 0601-6311 15” 33-1/4” 5-1/2” 7-3/8” 0601-6309 0601-6312 17” 33” 5-1/2” 7-5/8” 1-1/2” SUPER FAT FLOWBAR HANDLEBARS • Unique design, engineered in Germany • Available in 12 1/2”, 15” and 17” heights • Slotted for internal wiring • Works with hydraulic and cable clutches, cable operated throttle and TBW applications • 1¼” clamping area and 3 1/2” riser spacing • Made in the U.S.A. NOTE: Accepts H-D OEM heated grips. 0601-6309 0601-6316 FASTBACK GAUGE BUCKET FOR UNIVERSAL FASTBACK RISER • CNC machined from billet aluminum • Black anodized finish • 3-3/ 8” cup (for H-D round speedometer) PART # DESCRIPTION 2210-0670 For 22-24 FXLRS or Koso H-D 04 speedometer (PART #2211-0172) PART # DESCRIPTION FOR H-D MODELS WITH 3-1/2” ON-CENTER RISER MOUNTS 0602-1481 Chrome 0602-1482 Black BIG BLOCK RISER KITS • CNC machined from billet aluminum • Designed for handlebars with 1-1/ 4” diameter clamping area • Risers are 1-1/ 2” tall • All hardware included except for mounting bolts PART # DESCRIPTION FOR 18-24 FXBR/FXBRS 0602-1153 Chrome 0602-1152 Black LOWER RISERS FOR M-EIGHT SOFTAIL BREAKOUT • Stylish must for a Breakout, especially when doing a handlebar conversion • Constructed of forged aluminum • Work with stock upper clamp and speedometer housing • Available in chrome or black • Risers are approximately 1-1/ 4” from the bottom of the riser at the tree mount surface to the bottom of the handlebar • Easy installation • Sold in pairs 0602-1152 0602-1153 0602-1482 0602-1481
4 NOVEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION M-EIGHT SOFTAIL/ELW/PAN AMERICA DRIVER FOOTPEGS 1620-2615 Chrome M-EIGHT SOFTAIL/ELW/PAN AMERICA PASSENGER FOOTPEGS 1620-2616 Chrome MALE-MOUNT FOOTPEGS 1620-2614 Chrome MILITANT FOOTPEGS • Aggressive design with three grip rows • Aircraft-grade 6061 3.4” L x 2.25” W platform for ultimate support • Full 360° adjustable clevis • Sold in pairs • Made in the U.S.A. NOTE: See 2025 Drag Specialties Fatbook for an explanation of footpeg mount styles. 1620-2615 PART # DESCRIPTION W/ M-EIGHT SOFTAIL DRIVER FOOTPEG MOUNTS 1621-1179 Chrome 1621-0848 Black anodized W/ MALE MOUNTS 1621-1178 Chrome 1621-0842 Black anodized MINI DRIVER FLOORBOARDS • 6061 aircraft-grade billet aluminum • Stainless steel clevis • Measure 8” L x 3” W • Sold in pairs • Made in the U.S.A. 1621-1179 1621-0842 PART # DESCRIPTION FOR 99-24 FLHT/FLHR/FLHX/FLTR/FLTRU/FLTRK/FLTRX, 09-13 H-D FL TRIKE, 00-17 FLST AND 12-16 FLD 1621-1181 Driver, chrome FOR 99-24 FLHT/FLHR/FLHX/FLTR/FLTRU/FLTRK/FLTRX, 00-17 FLST AND 12-16 FLD 1621-1180 Passenger mini, chrome BAGGER FLOORBOARDS • 6061 aircraft-grade billet aluminum • Complete knurl board for better grip and control • Shaped like your foot for maximum usable space • Driver floorboards measure 14” L x 5” W • Passenger floorboards measure 12” L x 4” W • Mini passenger floorboards measure 8” L x 3” W • Made in the U.S.A. NOTE: Models with passenger footpegs will require the use of OEM accessory floorboard mounts. 1621-1181 1621-1180
5 DRAGSPECIALTIES.COM NOVEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DERBY COVER AND POWER PLATE KIT FEATURES • Combo kit includes billet aluminum derby cover and Trask power plate clutch upgrade • Power plate replaces stock clutch pressure plate with a stronger billet version • Includes upgraded springs to handle up to 200 HP with stock clutch pack • Engineered for riders who demand both function and aesthetics • Prevents clutch slippage resulting from motor upgrades • Derby cover offers custom styling with precision-machined finish • Bolt-on installation with hardware included • Made in the USA PART NO. DESCRIPTION DERBY COVER AND POWER PLATE KIT FOR 18-25 SOFTAIL 1107-0773 Chrome/Gold 1107-0772 Chrome/Red 1107-0771 Chrome/ 1107-0770 Black/Gold 1107-0769 Black/Red 1107-0768 Black 1107-0767 Chrome/Gold DERBY COVER AND POWER PLATE KIT FOR - 17-25 HARLEY-DAVIDSON 1107-0766 Chrome/Red 1107-0765 Chrome/Black 1107-0764 Black/Gold 1107-0763 Black/Red 1107-0762 Black
6 NOVEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # FITS MODEL OEM # LENGTH REAR BRAKE LINE KITS FOR FLHT/FLHR/FLHX/FLTR 1741-6335 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (master cylinder to ABS controller) does not include brake light switch 41800012 39” 1741-6337 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (caliper to ABS controller) 41800541 - 1741-6339 For 14-19 FLHT/FLHR/FLHX/FLTR w/o ABS 41800175 - 1741-6341 For 09-13 FLHT/FLHR/FLHX/FLTR w/o ABS 40971-09 42 1/2” FOR FX/FL SOFTAIL 1741-6343 For 18-23 FLFB/S, FXBR/S, w/ABS (master cylinder to ABS controller) 41800602 - 1741-6345 For 18-23 FLFB/S, FXBR/S, w/ABS (caliper to ABS controller) 41800603 - 1741-6347 For 18-23 FLHC/S, FLSB/FLSL/FXBB/S, FXFB/S, FXLR/S, and FXST w/ ABS (master cylinder to ABS controller) 41800598 - 1741-6349 For 18-23 FLHC/S, FLSB/FLSL/FXBB/S, FXFB/S, FXLR/S, FXST w/ ABS (caliper to ABS controller) 41800599 24” 1741-6351 For 18-23 FLSL/FLFB/S, FXFB/S, FXLR/S, FXBB/S, FXST w/o ABS 41800607 - 1741-6353 For 11-17 FXST/FLST w/o ABS - does not include brake light switch 42261-11A 50 3/4” PART # FITS MODEL OEM # LENGTH REAR BRAKE LINE KITS FOR FLHT/FLHR/FLHX/FLTR 1741-6334 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (master cylinder to ABS controller) does not include brake light switch 41800012 39” 1741-6336 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (caliper to ABS controller) 41800541 - 1741-6338 For 14-19 FLHT/FLHR/FLHX/FLTR w/o ABS 41800175 - 1741-6340 For 09-13 FLHT/FLHR/FLHX/FLTR w/o ABS 40971-09 42 1/2” 1741-3849 For 08 FLHT/FLTR/FLHX w/o ABS 40971-08 25”/20” FOR FX/FL SOFTAIL 1741-6342 For 18-23 FLFB/S, FXBR/S, w/ABS (master cylinder to ABS controller) 41800602 - 1741-6344 For 18-23 FLFB/S, FXBR/S, w/ABS (caliper to ABS controller) 41800603 - 1741-6346 For 18-23 FLHC/S, FLSB/FLSL/FXBB/S, FXFB/S, FXLR/S, FXST w/ ABS (master cylinder to ABS controller) 41800598 - 1741-6348 For 18-23 FLHC/S, FLSB/FLSL/FXBB/S, FXFB/S, FXLR/S, FXST w/ ABS (caliper to ABS controller) 41800599 24” 1741-6350 For 18-23 FLSL/FLFB/S, FXFB/S, FXLR/S, FXBB/S, FXST w/o ABS 41800607 - 1741-6352 For 11-17 FXST/FLST w/o ABS - does not include brake light switch 42261-11A 50 3/4” STANDARD LENGTH STAINLESS STEEL BRAKE LINE KITS • Features clear-coated stainless steel or black vinyl-coated braided lines with chrome steel fittings • Meets DOT specifications • Rear lines come with chrome steel switch junction block and use standard brake light switch (unless noted) • Made in the U.S.A. NOTE: All measurements are approximate. 1741-6334 CLEAR-COATED STAINLESS STEEL BLACK VINYL-COATED STAINLESS STEEL
7 DRAGSPECIALTIES.COM NOVEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS POWER VISION • The quickest, most powerful flash tuner on the market • The sophisticated, yet easy-to-use, 3.5” full-color touchscreen display mounts to handlebars with integrated AMPS 4-hole threaded inserts; also mounts to most aftermarket accessory mounts that feature AMPS 4-mounting options • The display’s interface cable plugs directly to the bike’s diagnostic connector • NO COMPUTER REQUIRED; simply select the tune and follow the on-screen prompts to flash the bike; tunes can also be edited directly from the Power Vision • Utilizes WinPV (Windows PC-based tuning application) • Stores up to six different tunes that can be flashed to the bike • Downloads and stores the stock calibration in case OEM restoration is needed; stock calibration can also be saved as an editable copy and used as a starting point • Dynojet preconfigured tunes are preloaded on the unit; Power Vision will identify the bike’s information and PART # DESCRIPTION EMIS* POWER VISION 1020-3472 For 21-24 M-Eight 3 1020-2325 For 14-20 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK, 11-20 Softail, 12-17 Dyna, 14-22 XL (except RH Sportster) and 15-20 XG (6-pin connector) 2 1020-2324 For all H-D models w/ Delphi EFI (except 11-20 Softail, 12-17 Dyna, 14-20 Dresser, 14-22 XL, 02-17 V-Rod, and 15-20 XG) (4-pin connector) 3 INTERFACE CABLE 1020-3473 For 21-24 M-Eight N/A automatically sort hundreds of applicable, dyno-proven tunes • Custom tunes can be loaded by a tuning shop or received via email and loaded onto the device • Displays all J1850 H-D vehicle data, wide-band air fuel ratio and various calculated channels (including MPG instant and trip MPG) • AutoTune Basic and Pro calculates and stores fuel trims to optimize fuel curve • Checks and clears diagnostic codes • Features adaptive trims and idle offset (with bike running) • Features a flat black outer case • See Dynojet website http://www.dynojet.com/powervision-tune-license-programs. aspx for information about purchasing additional Power Vision tune licenses. • Made in the U.S.A. MANUFACTURER’S NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes. 1020-3473 POWER VISION
RkJQdWJsaXNoZXIy NDI5NTY=