THE DRAG SPECIALTIES DECEMBER 2025 DRAGSPECIALTIES.COM DECEMBER 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 17-25 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2765 Chrome 2 1800-2764 Black 2 1800-2766 Eclipse 2 FOR 09-16 FLHT/FLHR/FLHX/FLTRX 1800-2768 Chrome 2 1800-2767 Black 2 1800-2769 Eclipse 2 2-INTO-1-INTO-2 DOMINATOR SR SYSTEMS • Engineered for performance, style and sound • Improves torque and horsepower from stock to the largest displacement build • Aggressive tone without annoying high-frequency resonance • Dominator SR is a 49 state legal version • Removes the OEM head pipe catalyst to reduce heat and improve rider comfort • Designed with a connected stepped head pipe and a unique baffle design • Head pipe is three-step (1.75” to 1.875” to 2.0”) for M-Eight or twostep (1.75” to 1.875”) for Twin Cam • 18 mm and 12 mm O2 bungs are welded into the header primaries • Heat shields have 220° coverage • 4.5” HP Plus compliant mufflers deliver Khrome Werks signature aggressive sound • Tune sound and performance with Cone Reduction kit and SAE-J2825 Decibel Reducer (sold separately) • End caps sold separately • Made in the U.S.A. NOTE: Comes without end caps. 1800-2766 SHOWN WITH END CAPS 1861-1780 1800-2765 SHOWN WITH END CAPS 1861-1455 1800-2764 SHOWN WITH END CAPS 1861-1456
2 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 18-25 FXFB/FXFBS/FXBB/FXLRS/FLSL/FXST 1800-27511,2 Chrome 2 1800-27491 Black 3 1800-27521,2 Black 2 1800-27501 Stainless steel 3 1800-27531,2 Stainless steel 2 PART # DESCRIPTION EMIS* FOR 22-25 FXLRST/FXRST/FLHC 1800-27452 Chrome 2 1800-27462 Black 2 1800-27472 Stainless steel 2 THE RIPPER 2-INTO-1 SHORT EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M-Eight Softail exhaust systems • Stepped 1-3/ 4” to 17/ 8” headpipes • Fully welded one-piece design • Select systems feature a catalyzed compliant baffle core (see chart) • Full heat shields • Angle cut end cap • 18 mm O2 bungs with 12 mm adapters • Made in the U.S.A. 1800-2749 1800-2750 1800-2747 1800-2745 1 Will fit 22-25 FXLRST/FXRST/FLHC if exhaust bracket PART #1861-1837 is used (sold separately). 2 Catalyzed compliant baffle core.
3 DRAGSPECIALTIES.COM DECEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 49-STATE 1800-2760 Chrome 2 1800-2759 Guardian Black 2 PART # DESCRIPTION EMIS* RACE ONLY 1800-2758 Chrome 3 1800-2757 Guardian Black 3 2-INTO-1 GNX EXHAUST SYSTEMS • Adds a clean, sleek appearance to your Touring bike • Deep exhaust tone and increased performance • 4.5” OD muffler body • Louvered baffle • Race-inspired Grand National end cap • Removable dB reducer (J2825 compliant) • Made in the U.S.A. FOR 17-25 FLHT/FLHR/FLHX/FLTRX/FLTRU 1800-2757 1800-2758 PART # DESCRIPTION 4405-0714 6” x 9” lid speakers 6” X 9” LID SPEAKERS • 200W, 2-ohm lid speakers with custom silicone gaskets to fit perfectly with all years of HogTune lids • Feature studio-quality polystyrene capacitors for crossover • Sold in pairs PART # DESCRIPTION 4405-1015 Pour 1998-2013 RETRO CUT-IN SPEAKER LID KIT WITHOUT SPEAKERS • Includes single-use templates for cutting lids, custom tooled speaker adaptors, grilles with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug-and-play harnesses • For use with 6” x 9” speakers U.S. Patent No. D1022962.
4 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE; 29-1/2” L OVERALL (14” L X 11-1/2” W FRONT) (10-1/2” L X 6-1/2” W REAR) 0801-2101 Smooth, solar-reflective leather 0801-20971 Smooth, vinyl 0801-20981 Double diamond, black thread 0801-21001 Double diamond, red thread 0801-20991 Double diamond, silver thread FREEDOM TOURING SEATS • Features solar-reflective leather in the seating area and high-quality automotive-grade vinyl on the sides (unless noted) • Features a 5-3/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Also works with H-D OEM frame-mounted backrest mechanism and backrest pad, sold separately • Includes all mounting hardware • Made in the U.S.A. 0801-2101 0801-2098 0801-2100 0801-2099 1 Not solar-reflective leather.
5 DRAGSPECIALTIES.COM DECEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE; 29” L OVERALL (12-1/2” W FRONT X 6-1/2” W REAR) 0801-21501 Double diamond, black thread w/ Slip Stop, and black logo 0801-21511 Double diamond, grey thread w/ Slip Stop, and grey logo FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLTR/FLHR (EXCEPT 23 FLHXSE/FLTRXSE) ; 31” L OVERALL (12” W FRONT X 6-1/2” W REAR) 0801-21522 Double diamond, black thread w/ Slip Stop™, and black logo 0801-21532 Double diamond, grey thread w/ Slip Stop, and grey logo FOR 97-07 FLHR, 06-07 FLHX; 31” L OVERALL (11-1/2” W FRONT X 7” W REAR) 0801-21483 Double diamond, black thread w/ Slip Stop, and black logo 0801-21493 Double diamond, grey thread w/ Slip Stop, and grey logo HIGHNOON 2-UP SEATS • Features a 6-3/ 4”, 7” or 71/ 2” tall driver support with unique styling (as noted) • Made from Slip Stop™ high-quality PVC material in the seating area and high-quality automotive-grade vinyl on the sides • Slip Stop high-quality PVC material is designed with gripping qualities to reduce slippage • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION FOR 18-25 FXLR/FXLRS/FXLRST, 18-21 FLSB; 29” L OVERALL (12-1/2” W FRONT X 6” W REAR) 0802-1671 Double diamond, black thread w/ Slip Stop, and black logo 0802-1672 Double Diamond, grey thread w/ Slip Stop, and grey logo HIGHNOON 2-UP SEATS • Features a 8-1/ 2” tall driver support with unique styling • Made from Slip Stop™ high-quality PVC material in the seating area and high-quality automotive-grade vinyl on the sides • Slip Stop high-quality PVC material is designed with gripping qualities to reduce slippage • Molded polyurethane foam for maximum comfort and styling 0802-1672 0802-1671 0801-2150 0801-2153 0801-2149 1 Features a 6-3/ 4” tall driver support. 2 Features a 7” tall driver support. 3 Features a 7-1/ 2” tall driver support. • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A.
6 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-2137 TR FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLHR/FLTR/FLTRU/FLTRK/FLTRX (EXCEPT 23 FLHXSE/FLTRXSE) AND 09-13 H-D FL TRIKE 0801-2135 TR PART # DESCRIPTION FOR 18-25 FXLR/FXLRS/FXLRST, 18-21 FLSB 0802-1668 TR THRASHIN’® PRO SERIES SEATS • Saddlemen® is proud to partner with the Thrashin’® crew on this line of performance-driven seats • Low profile and contoured for comfort • TR seats showcase true tuck-n’-roll construction • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant self-skinning process that seals the foam and enhances the seat’s durability • Feature whisper Saddlehyde™ fabric • Made in the U.S.A. THRASHIN’® PRO SERIES SEATS • Saddlemen® is proud to partner with the Thrashin’® crew on this line of performance-driven seats • Low profile and contoured for comfort • TR seats showcase true tuck-n’-roll construction • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant self-skinning process that seals the foam and enhances the seat’s durability • Feature whisper Saddlehyde™ fabric • Made in the U.S.A. 0801-2135 0802-1668 CHROME PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-25 FLTRXSE, 24-25 FLTRX 0601-6542 Chrome 10” 341/4” 9” 6” 0601-6543 Gloss black 10” 341/4” 9” 6” 0601-6544 Chrome 12” 351/2” 9” 6” 0601-6545 Gloss black 12” 351/2” 9” 6” 0601-6546 Chrome 14” 343/4” 9” 6” 0601-6547 Gloss black 14” 343/4” 9” 6” 0601-6548 Chrome 17” 343/4” 9” 6” 0601-6549 Gloss black 17” 343/4” 9” 6” 11/ 2” STRIP HANDLEBARS • Available in chrome or gloss black • Feature 11/ 4” clamping area • Polished welds • Slotted for internal wiring • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 0601-6544 0601-6549
7 DRAGSPECIALTIES.COM DECEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FOR DRESSER/TOURING TAILWHIP DADDY LONG LEGS SEATS • Rider’s seating area is moved 2” back over the standard Tailwhip, providing extra legroom • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whippedup tail will give you what you are looking for • Molded Marathon Foam PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1852 Cordova seat 0801-1853 Double diamond seat 0801-1855 Double diamond seat w/ burnt orange thread FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1437 Basket weave seat 0801-1438 Double diamond seat 0801-1537 Double diamond seat w/ red thread 0801-1700 Double diamond seat w/ chestnut thread 0801-1439 Pleated seat 0801-1437 0801-1438 0801-1439 0801-1700 0801-1537 • Biker Tec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. TAILWHIP SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1705 Basket weave seat 0801-1706 Double diamond seat 0801-1848 Double diamond seat w/ burnt orange thread 0801-1709 Pleated seat w/ Gripp tape 0801-1846 Cordova seat FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/ FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1314 Basket weave seat 0801-1315 Double diamond seat 0801-1535 Double diamond seat w/ chestnut thread FOR 99-07 FLHT/FLHR/FLHX/FLTR 0801-1455 Double diamond seat 0801-1709 0801-1535 0801-1455 0801-1314
8 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 18-24 M-EIGHT SOFTAIL 0901-0266 W/ 550G cam 3 0901-0267 W/ 475G cam 3 MK136 BLACK EDITION ENGINE FOR OIL-COOLED M-EIGHT • Complete crate engine, fully assembled • High-flow cylinder heads with premium valves, valve seats, guides, springs and seals • Intake and exhaust valves are +1 mm oversized and 0.030” longer than stock for improved valve train geometry • 0.605” lift valve springs • Gear-drive cam • High-strength alloy used in the cylinder head casting for improved strength at high temperatures • Enlarged cooling passages around the exhaust seats • S&S exclusive design breather boxes • Forged pistons • S&S Performance oil pump and cam support plate • Premium valve tappets and tappet cuffs • Billet aluminum engine and valve covers • Sprocket shaft spacer included • Champion brand spark plugs included • Retains stock engine height • Cam cover badge included • Black powdercoat finish matches the factory finish • Crankcase features dual-spray piston cooling jets • Precision-machined oil scraper 0901-0267 • Enlarged oil sump • Contoured oil pan floor allows oil to easily drain back to the sump • Made in the U.S.A. DELUXE TOURING SOLO SEATS WITH BACKREST • Seat pattern features black stitching and an eye-catching carbon fiber inlay • Driver’s backrest is fully adjustable and removable • Bucket-style saddle positions the rider comfortably in the seat for a more controlled ride • Mustang’s own proprietary controlled-density foam formula requires no break-in and retains it’s shape and support for years of durable, reliable comfort • Marine-grade fiberglass seat baseplate with polyurethane seat bumpers to absorb vibration • High-quality expanded vinyl seat cover has the appearance of leather but is more durable to withstand the elements • Optional matching passenger seats available (sold separately) • Made in the U.S.A. PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (15 1/2” W DRIVER’S SEAT AREA) 0801-1675 W/ black stitching 0801-1674 W/ grey stitching OPTIONAL PASSENGER SEATS (12” W PASSENGER SEAT AREA) 0801-1676 W/ black stitching 0801-1677 W/ grey stitching 0801-1677 0801-1675 SHOWN WITH OPTIONAL PASSENGER SEAT 0801-1676 0801-1674
9 DRAGSPECIALTIES.COM DECEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 17-25 M-EIGHT OIL-COOLED ENGINES 0904-0163 Wrinkle black w/ non-highlighted cylinder fins, chain drive cam 3 0904-0164 Wrinkle black w/ highlighted cylinder fins, chain drive cam 3 FOR 17-25 M-EIGHT WATER-COOLED ENGINES 0904-0168 Black granite w/ highlighted cylinder fins, chain drive cam 3 0904-0169 Wrinkle black w/ highlighted cylinder fins, chain drive cam 3 0904-0161 Wrinkle black w/ highlighted cylinder fins, gear drive cam 3 132” POWER PACKAGES FOR M-EIGHT • Big-bore bolt-on kit increases your 114”/117” with 4.5” stroke M-Eight to 132” with no case machining required • Big bore 4.32” cylinders with 11:1 forged pistons • S&S oil pump/cam plate with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screen in both scavenge pickups • Magnet in cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the oil feed and scavenge side • Adjustable pressure relief valve can be adjusted with the unit installed in the engine • Quickee pushrods with chrome pushrod tubes • S&S premium tappets • S&S hard-anodized, black coated tappet cuffs are billet aluminum construction • Improved tappet stability in high-lift, high-rpm situations • S&S 550 cams designed for big bore applications (gear or chain drive cams available) • S&S valve springs; work with cams up to 0.605” lift • High-performance conical single-wire spring design • All necessary gaskets, bearings and hardware for bolt-on installation included • Original engine serial numbers are retained • Made in the U.S.A. NOTE: Not for 121” CVO models. 0904-0164 0904-0161
10 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 17-25 M-EIGHT OIL-COOLED ENGINES 0904-0167 Wrinkle black w/ highlighted fins and chrome pushrod tubes, chain drive cam 3 0904-0166 Wrinkle black w/ highlighted fins and black pushrod tubes, chain drive cam 3 0904-0165 Wrinkle black w/o highlighted fins and black pushrod tubes, chain drive cam 3 129” POWER PACKAGES FOR M-EIGHT • Big-bore bolt-on kit increases your 107” M-Eight to 129” with no case machining required • 4.32” bore cylinders with 11:1 forged pistons • S&S oil pump/cam plate with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screen in both scavenge pickups • Magnet in cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the oil feed and scavenge side • Adjustable pressure relief valve can be adjusted with the unit installed in the engine • Quickee pushrods with chrome pushrod tubes • S&S premium tappets • S&S hard-anodized, black coated tappet cuffs are billet aluminum construction • Improve tappet stability in high-lift, high-rpm situations • S&S 550 cams designed for big bore applications • S&S valve springs; work with cams up to 0.605” lift • High-performance conical single-wire spring design • All necessary gaskets, bearings and hardware for bolt-on installation included • Made in the U.S.A. 0904-0165 0904-0167
11 DRAGSPECIALTIES.COM DECEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS TRASK PERFORMANCE Trask Performance is one of the top tuning shops in the world for American V-Twin motorcycles. Their latest innovation is the Derby Cover And Power Plate Kit, designed to boost clutch performance and eliminate clutch slip in high-performance M-Eight engines. A bolt-on upgrade to your bike’s driveline that boosts performance and adds custom style. PART # DESCRIPTION FOR 17-25 FLH/FLHT/FLHTC/FLHTK/FLHTKL/FLHTKSE/FLHFB/FLHX/FLHXS/ FLHXST/FLHXSE/FLTRU/FLTRX/FLTRXS/FLTRXST/FLHR/FLHRXS/FLTRT 1107-0765 Chrome derby cover, black power plate 1107-0767 Chrome derby cover, gold power plate 1107-0766 Chrome derby cover, red power plate 1107-0762 Black derby cover, black power plate 1107-0764 Black derby cover, gold power plate 1107-0763 Black derby cover, red power plate PART # DESCRIPTION FOR 19-25 FXBB/FXBBS/FXBR/FXBRS/FXFB/FXFBS/FXLR/FXLRS/ FXLRST/FXRST/FLDE/FLFB/FLFBS/FLHC/FLHCS/FLSL, 18 FLSB 1107-0771 Chrome derby cover, black power plate 1107-0773 Chrome derby cover, gold power plate 1107-0772 Chrome derby cover, red power plate 1107-0768 Black derby cover, black power plate 1107-0770 Black derby cover, gold power plate 1107-0769 Black derby cover, red power plate DERBY COVER AND POWER PLATE COMBO KIT • Includes billet aluminum derby cover and Trask Power Plate clutch upgrade • Power Plate replaces stock clutch pressure plate with a stronger billet version • Includes upgraded springs to handle up to 200 hp with stock clutch pack • Prevents clutch slippage resulting from motor upgrades • Derby cover offers custom styling with precision-machined finish • Bolt-on installation with hardware included • Made in the U.S.A. 1107-0762 1107-0769 1107-0770 1107-0773 1107-0766 1107-0765 PART # DESCRIPTION 0705-0031 For 01-03 models w/ Delphi EFI (adapter and plug); for use w/ any Pingel 22 mm valve 0705-0055 For 00-23 models w/ Delphi EFI (adapter only); for use w/ any Pingel 22 mm valve (repl. OEM #62842-00) 0705-0030 For 99-01 FLT/FLHT w/ Magneti Marelli EFI (adapter and plug); for use w/ any Pingel 22 mm valve TANK FITTING KITS FOR FUELINJECTION TO CARBURETOR CONVERSION • Use when converting from OEM fuel-injection systems to a carburetor in order to deliver adequate fuel for large-displacement engines • Kit replaces the factory tank fittings, allowing the use of a highquality, high-flow Pingel fuel valve to feed the carburetor • Made of stainless steel • Kit includes adapter and plug or adapter only with O-rings or gaskets • Requires Pingel fuel valves due to tight tolerances in tank fittings (sold separately) • Made in the U.S.A. 0705-0055 0705-0030
12 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2120-1447 For 17-22 M-Eight and 99-17 Twin Cam; repl. OEM #32435-97 IGNITION WIRING HARNESS • Complete early-style ignition wiring harness • Direct replacement for the OEM harness; also works great for custom jobs when converting from EFI to a carburetor • Plug-in installation • Made in the U.S.A. PART # DESCRIPTION 2120-1493 For 21-25 RH1250S (+15”) SPEEDOMETER WIRE HARNESS EXTENSION • Allows for the relocation of the OEM or an aftermarket speedometer using the 12-position OEM wiring connector • Direct plug-in installation to the stock wiring harness • Made in the U.S.A. PART # DESCRIPTION 2120-1446 For 25 FXLRS/FXLRST/FXBR/FLFB/FLHC +18” HANDLEBAR WIRE HARNESS EXTENSION KIT • Designed and tested to extend your wiring without causing any harm or interference to the motorcycle’s computer when installing taller handlebars • Colour coded to connect to the existing Molex connector; simply plug and play • Made in the U.S.A. PART # DESCRIPTION LEFT 0640-1857 Chrome 0640-1858 Gloss black PART # DESCRIPTION RIGHT 0640-1860 Chrome 0640-1861 Gloss black ASCENT PRO MIRRORS • Elevate your bar setup with the clean, aggressive design of the Kodlin Ascent Pro Mirrors • Featuring signature Ascent Pro machining details, these mirrors combine premium aesthetics with exceptional performance • Precision-forged mirror head and stem from billet aluminum • Heavy-duty proprietary internal pivot system crafted from stainless steel • Ultra-slim mirror profile delivers outstanding rear visibility • Available in chrome, gloss black and matte black finishes • Universal H-D fitment • Perfectly complement the rest of the Kodlin Ascent Pro lineup as well as other Kodlin covers • Sold each 0640-1857 0640-1861
13 DRAGSPECIALTIES.COM DECEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION LEFT FRONT PART # RIGHT FRONT PART # For 14-23 FLHT/FLHX/FLTRX/FLTRU, 14-19 FLHTK, 20-25 FLHRXS, 17-19 FLHR , 08-17 FXDF, 14-17 FXDL/FXDLS 1710-2443 1710-2443 For 25 FLHXU, 24-25 FLHX/FLTRX and 21-25 RA1250/S/ST 1710-4837 1710-4837 For 09 XL1200R, 10-12 XR1200 1710-4836 1710-4836 FRONT BRAKE ROTORS • Provide better braking, improved brake alignment, no rotor distortion, reduced chance of rotor cracking and stylish looks • Unique low-carbon rotors • Available in standard diameter which bolt on with no modifications and utilize standard H-D calipers PART # DESCRIPTION LEFT 1701-0815 Grey 1701-0816 Red 1701-0817 White PART # DESCRIPTION RIGHT 1701-0812 Grey 1701-0813 Red 1701-0814 White RACE SERIES RADIAL MOUNT FRONT CALIPERS WITH ARC TECHNOLOGY • CNC machined from billet aluminum • Increased rigidity for improved braking performance • Advanced Radiant Cooling (ARC) Technology for maximum cooling efficiency • Designed for use with 0.200” thick brake rotors • For use with radial caliper mounts with 108 mm mounting bolt spacing (sold separately) • Chrome mounting hardware included • Made in U.S.A. 1701-0816 1701-0817 1701-0812 1710-2443 1710-4836 1710-4837 FRONT BRAKE ROTORS
14 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 17-25 FLHT/FLHR/FLHX/FLHXU/FLTRX/FLTRU/FLTRK 0414-0781 22-7/8” (stock length) FOR 18-25 FXBB/FXBBS/FXBR/FXBRS/FXST/FLHC/FLHCS, 18-21 FLDE/FLSL, 18-20 FXLR 0414-0779 23-3/4” (stock length) FOR 18-25 FLFB/FLFBS 0414-0780 23-7/8” (stock length) PART # DESCRIPTION FOR 06-17 FXD/FXDWG 0414-0778 25-1/2” (FXD; stock length) 0414-0778 27-1/2” (FXDWG; stock length) FOR 16-22 XL1200X/1200XS 0414-0782 24-1/2” (stock length) FORK CARTRIDGE KITS • Designed for 06-25 Harley-Davidson models with 49 mm fork tubes • Engineered to adsorb every bump in the road giving the rider consistent surface feedback for added confidence and traction • Large 30 mm piston enhances fluid control and provides a smooth, finely tuned response to any road condition • This gives the rider a comfortable, controlled riding experience without compromising stability or responsiveness PART # DESCRIPTION 0414-0776 For 23-25 FLTRXSE AXEO 47 PERFORMANCE FRONT SUSPENSION • Fully Customizable Suspension, engineered for riders who demand control; easily dial in suspension settings to match your exact riding style and conditions • Split Function Cartridge Design: The right fork controls the compression damping and the left fork controls the rebound damping, allowing you to finetune each function independently for ultimate precision • Tool-free compression and rebound adjustments • External preload adjuster enables easy tuning for different rider weights with included adjustment tool • Performance spring rate delivers agile handling for aggressive riders without sacrificing comfort • Improves cornering clearance and minimizes dragging floorboards • Improves ride quality, straight-line stability, high-speed cornering, and maneuverability • Increases resistance to bottoming out on large bumps or potholes • Cartridges will have precise fitment to match the fork tube length • Must be used with stock or aftermarket 49 mm fork tubes; sold separately • Made in the U.S.A. 0414-0778 • Reduces front-end dive and improves front tire traction under aggressive braking • Designed for optimum performance with all Legend’s rear suspensions • Includes two mono-tube, dual-chambered damper cartridges and preload adjustment tool • Specifically designed to retain factory ride height on FL touring models • Designed to be used with stock diameter front wheels • Available only in standard length • Made in the U.S.A. NOTE: This product is NOT designed for use with 21” and 23” wheels. NOTE: Does not fit 2018-2022 FLTRXSE CVO Road Glide (See PART #0414-0544).
15 DECEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2030-2463 For 18-25 FLHC/FXLRS/FXLRST/FXRST, 18-20 FXLR, 86-17 FLST, 91-17 FXD, 84-11 XL w/ 3-bolt license plate support bracket OEM #s 59984-73, 59986-75 ULTRA LITE LOW PROFILE LICENSE PLATE MOUNT • Ultra low profile meticulously engineered to sit close to the fender for a discrete, streamlined appearance • Lightweight construction aluminum main plate and high-impact plastic spacer; ideal for high performance builds • Smooth and refined with a brushed aluminum finish • Specifically designed for aftermarket rear carbon fiber fenders to prevent damage but compatible with other fender types • Seamless integration with Custom Dynamics Illuminated 12 radius license plate frames (sold separately) • Includes custom rubber mount pads to protect and reinforce mounting points, and stainless steel allen bolts and Nyloc nuts for secure installation NOTE: Can be used in custom applications but will require drilling holes. DESCRIPTION BLEU OR ROUGE 21” x 5.5” 0201-2645 0201-2646 0201-2647 FORGED BILLET Y-SPOKE FRONT RIMS • All rims are CNC machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings NOTE: Arlen Ness hub kits must be purchased separately to install (see the 2025 Drag Specialties FatBook). NOTE: Also requires separate purchase of Arlen Ness Fat Tire fork boot covers or Fork Tube guards to install (please see FRAMES & SUSPENSION section in the 2025 Drag Specialties FatBook). SAFETY WARNING: When selecting custom wheels, the tires used for your application must have a load index and speed rating equal to or greater than the tires fitted as original equipment. Consult manufacturer’s publication(s) and/or website(s) for complete tire information. 0201-2646 0201-2645 0201-2647
RkJQdWJsaXNoZXIy NDI5NTY=