All Rekluse clutch products are precision-engineered and made of high-quality materials to provide the best in performance and durability. Their components are stronger, lighter, longer-lasting and built for maximum performance. Rekluse’s industryleading auto clutches are optimized for each bike model as it comes from the factory and they’ve designed each clutch to be fine-tuned for every rider. Rekluse’s manual clutches deliver unprecedented performance, tuning and durability with a design that provides more disks in less space, allowing up to four additional friction disks over stock. PART NO. DESCRIPTION 1130-0308 For 99-17 Twin Cam w/ cable actuated clutch (except models with slipper/assist clutch) 1130-0312 Fits 13-20 Big Twin w/ slipper/assist hydraulic clutch (3-coil clutch springs) RADIUSX CLUTCH KITS • RadiusX is a high-performance centrifugal auto clutch combining Rekluse’s TorqDrive® and EXP technologies • TorqDrive provides more clutch discs in less space, allowing for maximum performance within the bike’s existing clutch footprint • Full clutch control and use of the lever is retained for a no-compromise riding experience • RadiusX offers dead-on clutch engagement every time and allows riders to take off and stop in gear without using the clutch lever • Riders will experience maximum power delivery • Rekluse TorqDrive friction discs deliver higher torque capacity and increased power transfer • With RadiusX, you’ll confidently navigate traffic and slow speed conditions • Rekluse sleeves eliminate basket wear and notching • Installing RadiusX does not require modification to stock components • Shifting the transmission remains unchanged (clutch lever use is recommended for shifting) NOTE: Designed for use with OEM or Rekluse clutch baskets/shells only. PART NO. DESCRIPTION 1130-0307 For 13-24 Big Twin w/ slipper/assist clutch 1130-0306 For 99-17 Twin Cam (except models w/ slipper/assist clutch) TORQDRIVE® CLUTCH KITS • TorqDrive® provides more disks in less space, allowing us to add up to six additional friction disks to the clutch pack over stock • More frictions = more torque capacity, thus unlocking the full power of your engine without the need to add stiffer pressure plate springs or a lock-up device • TorqDrive provides smoother shifting and improved lever feel • Rekluse basket sleeves eliminate basket wear and notching NOTE: Designed for use with OEM or Rekluse clutch baskets/shells only. 1130-0308 1130-0312 1130-0307 1130-0306 THE DRAG SPECIALTIES MAY 2025 DRAGSPECIALTIES.COM MAY 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
2-1 HIGH OUTPUT PCX™ EXHAUST SYSTEMS • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • Lightweight high-grade 304 stainless steel construction • Hand TIG-welded • Stepped from 1.75” to 1.875” to 2.0” and feed into 4” Hi-Output megaphone • Fits with standard (non-stretched) saddlebags PART NO. DESCRIPTION EMIS* FOR 17-22 FLHT/FLHTX/FLTRX/FLTRU/FLHX/FLHR 1800-2725 Brushed 1 1800-2726 Matte black 1 1800-2726 1800-2725 2 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
SIDEWINDER 2-INTO-1 EXHAUST SYSTEMS • Increased power and torque • Stainless steel header construction • High-flow catalytic converters • Includes adapters that allow use of wide band or stock O2 sensors • Machined aluminum end cap PART NO. DESCRIPTION EMIS* FOR 17-24 FLHT/FLHR/FLHX/FLTRX/FLTRU 1800-2731 Chrome w/ black highlighted machined end cap 1 1800-2732 Guardian black w/ black highlighted machined end cap 1 • Deep performance exhaust note • All necessary mounting hardware included NOTE: Exempt per CARB Executive Order (E.O.) #K-010-34 for 17-24 Touring models listed. NOTE: Not for H-D FL Trike applications. 1800-2731 1800-2732 3 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
ROADSOFA™ LS SEATS • Lattice stitch (LS) seats infuse old-school lattice stitch retro styling with a modern twist • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive density foam and GelCore™ inserts for superior driver and passenger comfort PART NO. DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1713 W/ blue stitching 0801-1714 W/ gray stitching 0801-1715 W/ orange stitching PART NO. DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE CONT'D 0801-1716 W/ red stitching 0801-1717 W/ silver stitching 0801-1718 W/ white stitching • Perforated, ventilated leather cover for the ultimate in luxurious comfort, feel and looks • Protective rain cover included • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead 0801-1717 0801-1718 0801-1713 0801-1715 0801-1714 0801-1716 4 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
BARE BONES SOLO SEATS • Simplistic style brings out the true expression of your custom or stock bike • Premium-grade vinyl cover • Baseplate is powdercoated steel and carpeted to protect painted surfaces • Seating area is 11” W • Up-Front seat is for shorter riders and moves the rider forward PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1841 Smooth solo seat 0801-1842 Diamond stitch solo seat 0801-1843 Smooth pillion pad 0801-1844 Diamond stitch pillion pad • Seat with removable/adjustable driver backrest features a 10.5” x 7” pad • Pillion pad sold separately • Made in the U.S.A. FOR DRESSER/TOURING TAILWHIP DADDY LONG LEGS SEATS • Rider’s seating area is moved 2” back over the standard Tailwhip, providing extra legroom • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1852 Cordova seat 0801-1853 Double diamond seat 0801-1855 Double diamond seat w/ burnt orange thread FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/ FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1437 Basket weave seat 0801-1438 Double diamond seat 0801-1537 Double diamond seat w/ red thread 0801-1700 Double diamond seat w/ chestnut thread 0801-1439 Pleated seat 0801-1437 0801-1438 0801-1439 0801-1700 0801-1537 0801-1853 0801-1855 0801-1852 0801-1843 0801-1844 0801-1842 0801-1841 5 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
FOR DRESSER/TOURING TAILWHIP UP FRONT SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover • Up Front design moves you 2” closer to the handlebars • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. PART # DESCRIPTION FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/ FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) (CONT) 0801-1544 Double diamond seat w/ black thread 0801-1545 Basket weave seat PART # DESCRIPTION FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/ FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) (CONT) 0801-1546 Pleated seat 0801-1547 Double diamond seat w/ chestnut thread 0801-1544 0801-1545 0801-1547 0801-1546 TAILWHIP SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1705 Basket weave seat 0801-1706 Double diamond seat 0801-1848 Double diamond seat w/ burnt orange thread 0801-1709 Pleated seat w/ Gripp tape 0801-1846 Cordova seat PART # DESCRIPTION FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/ FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1314 Basket weave seat 0801-1315 Double diamond seat 0801-1535 Double diamond seat w/ chestnut thread FOR 99-07 FLHT/FLHR/FLHX/FLTR 0801-1455 Double diamond seat 0801-1314 0801-1709 0801-1535 0801-1705 0801-1848 0801-1846 0801-1455 • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. 6 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
HORN RELOCATION KIT • Specifically designed to replace the “afterthought” stock horn on the left side of the new Touring models • Cover is CNC machined from billet aluminum • Includes a replacement horn for relocation under the seat and a wiring harness PART NO. DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2107-0359 Chrome 2107-0358 Black anodized COOLANT RESERVOIR COVERS • Specifically designed to cover that awkward plastic coolant reservoir cover on the left side of the new Touring models • CNC machined from billet aluminum • All hardware included • Very easy installation PART NO. DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 0932-0314 Chrome 0932-0313 Black anodized BRL SADDLEBAGS • Race-inspired design • Gelcoat finish • Lightweight composite • Vacuum-infused for high strength-to-weight ratio • Compatible with 2014 and newer H-D lids, latches and hinges • Right and left sides sold separately PART NO. DESCRIPTION FOR 14-24 FLHR/FLHT/FLHX/FLTR 3501-2119 Left 3501-2118 Right 3501-2118 3501-2119 2107-0358 2107-0359 0932-0313 0932-0314 7 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
ADJUSTABLE STABILIZER LINKS • Adjustable front stabilizer link for H-D Touring frames • Features reverse thread rod end and ARP stainless bolts • Machined aluminum construction PART NO. DESCRIPTION FOR 09-24 FLHT/FLHX/FLHR/FLTR 0933-0145 Black anodized 0933-0146 Gold anodized PART NO. DESCRIPTION FOR 09-24 FLHT/FLHX/FLHR/FLTR (CONT) 0933-0144 Raw MULTI REAR BRAKE CALIPER MOUNT • Use to adjust the spacing on the caliper bracket to fit desired rotor diameter • Includes spacers to fit rotor diameters of 8” to 11.8” • CNC-machined aluminum construction PART NO. DESCRIPTION RADIAL CALIPER (108 MM BOLT CENTERS) 1701-0803 Black 1701-0802 Raw PART NO. DESCRIPTION SUPER SPORT CALIPER (84 MM BOLT CENTERS) 1701-0805 Black 1701-0804 Raw CAM COVER • Low profile design to bring large diameter headers closer for extra ground clearance • Large breather fitting option allows for greater crankcase breathing • CNC-machined 6061 T-6 billet aluminum • Black finish • Includes gasket and mounting hardware ALLOY ART American-made art for your American V-Twin! Alloy Art has taken note of the performance bagger movement and offers some very cool new parts for the latest models. From low-profile cam covers to custom rear brake mounts, Alloy Art has the parts you need to push the style and performance of your Bagger to the next level. PART NO. DESCRIPTION 0940-2222 For 17-24 M-Eight (except 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE) 0933-0144 0933-0145 1701-0802 1701-0804 FOR 09-24 FLHT/FLHX/FLHR/FLTR 8 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
STX 36 BLACKLINE SHOCKS • Adjustable rebound and compression damping • 1.417” (36 mm) piston diameter • Multiple spring rates available • Hard-anodized, CNC-machined components • Length adjustable by 0.393” • High-pressure nitrogen gas charged • Adjustable preload with billet tool • Low-friction shaft and seal head design • Fully serviceable • Fits with Tour-Pak PART NO. LENGTH RATE N/MM STROKE FOR 14-24 FLH/FLHR/FLHTCU/FLHX/FLTR 1310-23971 12.224” 26 3.09” 1310-2398 12.224” 28 3.09” 1310-23991 12.933” ( +/-0.196”) 26 3.40” 1310-2400 12.933” ( +/-0.196”) 28 3.40” 12.6” (320 MM) FRONT BRAKE ROTORS • Direct fit, one piece rotors • Machine, black or gold finish spoke-mounted rotors • 5-lug 6.7” bolt pattern • Can be used for both right and left side applications • Slotted rotor grooves improve performance under heavy braking by lowering brake fade from high-temperature brake pad outgassing, by allowing gases to escape through the slots, improving braking consistency • Sold each PART NO. DESCRIPTION FOR 24 FLHX/FLTRX (EXCEPT CVO) 1710-4737 Black 1710-4738 Gold 1710-4736 Machine finish 1710-4737 1710-4736 1710-4738 1310-2397 1 Brackets for reservoir are included. 9 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CENTER FAIRING VENT TRIM WITH TURN SIGNALS • Slimline smoked faceted lens stretches across lower center windshield edge • 72 dual-color LEDs with bright white running light and full contrast amber turn signals • Select one of three built-in flash modes: solid on, sequential on or sequential off • Affixed isolators snap into place in the OEM fairing air duct cover • Includes plug-and-play harnesses NOTE: Requires run/turn adapter PART #2120-1344 for plug-and-play installation (sold separately). PART NO. DESCRIPTION 2040-3309 For 23-24 FLTRXSE, 24 FLHRX/FLTRXSTSE WINDSHIELD TRIM WITH LED TURN SIGNALS • Gloss black aluminum trim with flush-mounted amber/white LEDs behind a smoked lens • White running light LEDs are automatically deactivated when the sequential turn signals or hazard warning lights are activated, allowing for greater visibility of the turn signals • Direct bolt-on installation with included mounting hardware and wiring • Requires run/turn signal accessory adapter PART #2120-1344 for plug-and-play (sold separately) PART NO. DESCRIPTION 2040-3308 For 23-24 FLTRXSE, 24 FLTRX/FLTRXSTSE (OEM windshield only) SHARK DEMON® HEADLIGHT KIT FOR MEMPHIS SHADES ROAD WARRIOR® FAIRING • Specialized high-performance LED headlights designed for motorcycle use • Durable polycarbonate lens with IP67 waterproofing • 5800 to 6500K daylight colour temperature • Low beam has 3 projection LEDs; 3600 raw lm/2651 effective lumens • High beam has 4 direct-reflective LEDs: 9080 raw lm/4485 effective lumens • Low beam stays on while high beam is engaged • 3 mm 304 stainless steel mounting bracket mounts to Memphis Shades Road Warrior® fairing • DOT and SAE compliant PART NO. DESCRIPTION 2001-2932 For 22-24 Chief Bobber/Bobber Dark Horse w/ Memphis Shades Road Warrior® Fairing PART #2330-0269 2001-2932 For 22-24 Chief/Dark Horse w/ Memphis Shades Road Warrior Fairing PART #2330-0271 2001-2932 For 18-24 Scout Bobber, 16-24 Scout Sixty, 15-24 Scout w/ Memphis Shades Road Warrior Fairing PART #2330-0165 CUSTOM DYNAMICS Custom Dynamics is the leader in lighting accessories for American V-Twin motorcycles. LED Headlight kits, turn signals, fairing trim and more ... all designed to provide eye-catching bright LED lighting upgrades. And they make sure every product is thorough tested to ensure the very best in performance, long life and ease of installation. 10 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
BA AIR CLEANER KITS • With years of experience designing improved cylinder heads, combustion chambers and intake manifolds, Feuling® brings light to a new bolt-on air cleaner • Developed and designed on the flow bench, and dyno-tested • Impressive horsepower and torque gains on any engine and exceptional gains seen on engines running modified and/or ported cylinder heads along with intakes and larger throttle bodies • One piece design, creates a clean look and eases installation when compared to the industry standard multi stack up construction • Feature lengthened intake runners for increased air velocity, delivering added volume for balanced dynamic flow • High flow billet aluminum velocity stack with optimal opening diameter, outer lip and internal (ID) taper • High flow washable/reusable 2.5” wide air filter with one-piece billet cage • Fits standard OEM 58 mm throttle bodies • Available with solid or clear outer covers PART NO. DESCRIPTION EMIS* SOLID OUTER COVER 1010-3340 Chrome finish w/ black filter 3 1010-3323 Chrome finish w/ red filter 3 1010-3338 Black anodized finish w/ black filter 3 CLEAR OUTER COVER 1010-3341 Chrome finish w/ black filter 3 1010-3324 Chrome finish w/ red filter 3 1010-3339 Black anodized finish w/ black filter 3 1010-3322 Black anodized finish w/ red filter 3 DUAL ELECTRIC ACCESSORY SPLITTER HARNESS • Designed to plug seamlessly into the H-D OEM accessory connnector • Splitter provides two connections, making it perfect for powering up aftermarket accessories • Plug-and-play installation • Sold each PART NO. DESCRIPTION 2120-1397 For 17-24 FLHR/FLHT/FLHX/FLRT/FLHTCUTG (except 24 FLHX/FLHXS/FLTRX/FLTRXS, 23-24 FLHR/FLHT/FLHXSE/FLTRXSE/FLHTCUTGSE) 2120-1397 For 18-24 FXBB/FXBBS/FLHC/FLHCX/FLFB/FLFBS/FXFB/FXFBS, 20-24 FXST/FXLRS, 22-24 FXLRST, 22 FXRST, 18-20 FXLR/FLDE/FXSB/FXSR, 23-24 FXBR, 18-21 FLSB/FLSL, 19-20 FXDR PERFORMANCE LED REAR TURN SIGNALS • Aggressively styled signals offer bright dual-intensity red illumination in a compact size • Faceted smoke lens with gloss black metal housing • Stainless steel fasteners • Direct replacement for OEM • Plug-and-play • Sold in pairs • DOT compliant PART NO. DESCRIPTION 2020-2292 For 18-24 FXBB/FXBBS, 20-24 FXST, 18-20 FXSB/FXSR, 23-24 FXBR, 18-21 FLSL, 20-24 FXLRS, 18-20 FXLR 2020-22981 For 00-12 Softail, 00-10 Dyna and 00-03 XLH883/883C/883R/1200/1200C/1200S 2020-2292 2020-2298 • Replacement filters available (sold separately in the 2025 Drag Specialties FatBook) • Optional rain sock available (sold separately in the 2025 Drag Specialties FatBook) • Optional 13/ 8” colored velocity stacks allow customers to further customize their BA air cleaners (sold separately in the 2025 Drag Specialties FatBook) 1010-3323 1010-3339 1010-3341 1 Bikes w/ OEM side mount plate frames will require the plate frame to be relocated. FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 11 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
LEGEND AIR-A SUSPENSION FOR FL MODELS • All the benefits of the Legend AIR suspension systems, plus six external knob adjustments allow fine tuning of rebound damping • Provides optimum rebound performance for any given rider weight, personal ride-quality preference, or personal riding style • Light to heavy riders can fine-tune ride preference • Aggressive to casual riding styles can tune to desired quality or personal preference NOTE: Designed specifically for 2023-2025 FL models with Skyline Operating System. NOTE: Does not fit H-D Trike models. PART NO. DESCRIPTION 1311-0186 For 25 FLHXU, 24-25 FLHX/FLTRX, 23-25 FLHXSE/FLTRXSE LEGEND AIR SUSPENSION FOR FL MODELS • Legend AIR Suspensions systems set the high mark in ultimate ride quality • Exclusive Aramid Fiber air spring technology provides spring rate adjustability • Air springs maximize wheel travel and adjust to any desired ride height • Fitment accommodates 12” and 13” needs • Easy installation and alignment, provided by spherical bearings on both top and bottom mounting points • Type III hard-coat black anodized machined aluminum bodies • Low friction sealing system and sliding bearings for improved performance and feel • High flow piston reacts quickly for improved fluid flow management • Deflective disc valving self-adjusts to frequency and ensures controlled performance • Includes prewired air compressor with model specific mounting • Complete wire harness installs with three easy Deutsch connections • Includes black handlebar mounted control for easy “on-the-go” adjustability PART NO. DESCRIPTION 1311-0185 For 25 FLHXU, 24-25 FLHX/FLTRX, 23-25 FLHXSE/FLTRXSE LEGEND SUSPENSIONS Legend Suspensions uses only pristine, quality materials and components manufactured in America to ensure the highest levels of quality and performance. The company’s FL Air Suspension system lead the industry in quality, performance and fit/finish. Give yourself and your bike the finest ride quality available - choose Legend Suspensions. NOTE: Designed specifically for 2023-2025 FL models with Skyline Operating System. NOTE: Does not fit H-D Trike models. 12 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
LEGEND AIR SUSPENSION FOR TRIKE MODELS • Legend AIR Suspensions systems set the high mark in ultimate ride quality • Exclusive Aramid Fiber air spring technology provides spring rate adjustability • Air springs maximize wheel travel and adjust to any desired ride height • Fitment accommodates 12” and 13” needs • Easy installation and alignment, provided by spherical bearings on both top and bottom mounting points • Type III hard-coat black anodized machined aluminum bodies • Low friction sealing system and sliding bearings for improved performance and feel • High flow piston reacts quickly for improved fluid flow management • Deflective disc valving self-adjusts to frequency and ensures controlled performance • Includes prewired air compressor with model-specific mounting • Complete wire harness installs with three easy Deutsch connections • Includes OEM-looking black handlebar mounted control for easy “on-the-go” adjustability PART NO. DESCRIPTION 1311-0187 For 14-25 FLHTCUTG, 15-25 FLRT, 23-25 FLTRT LEGEND AIR-A SUSPENSION FOR TRIKE MODELS • All the benefits of the Legend AIR Suspension system plus six external knob adjustments allow the finetuning of rebound damping • Provides optimum rebound performance for any given rider weight, personal ride-quality preference or personal riding style • Light to heavy riders can fine-tune ride preference • Aggressive to casual riding styles can tune to desired quality or personal preference • Optional chrome handlebar-mounted control (PART #0616-0207), sold separately NOTE: Tri-Glide lift kit brackets PART #1313-0120 recommended for 14-16 models, PART #1313-0247 recommended for 17-25 models. PART NO. DESCRIPTION 1311-0188 For 14-25 FLHTCUTG, 15-25 FLRT, 23-25 FLTRT • Optional chrome handlebar-mounted control sold separately (PART #0616-0207) • Optional fairing mounted matching gauges (PART #s 2212-0484, 2212-0485, 2212-0492, 2212-0493, 2212-0494) sold separately NOTE: Tri-Glide lift kit brackets PART #1313-0120 recommended for 14-16 models, PART #1313-0247 recommended for 17-25 models. 13 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
LEGEND 13.6” AIR SUSPENSION FOR M-EIGHT TRIKE MODELS • 13.6” length maximizes rear ride height on 2017 and newer trikes utilizing OEM shock mount plates • Eliminates the need for a lift kit • Levels out trike models that sit low in the rear from the factory • Reduces dragging and scuffing of mufflers when rolling through drain basins, backing up to curbs, or loading on a trailer • Easier steering due to less trail in the front end • Legend AIR Suspensions systems set the high mark in ultimate ride quality • Exclusive Aramid Fiber air spring technology provides spring rate adjustability • Air springs maximize wheel travel and adjust to any desired ride height • Easy installation and alignment, provided by spherical bearings on both top and bottom mounting points • Type III hard-coat black anodized machined aluminum bodies • Low friction sealing system and sliding bearings for improved performance and feel • High flow piston reacts quickly for improved fluid flow management • Deflective disc valving self-adjusts to frequency and ensures controlled performance • Includes prewired air compressor with model-specific mounting • Complete wire harness installs with three easy deutsch connections LEGEND 13.6” AIR-A SUSPENSION FOR M-EIGHT TRIKE MODELS • 13.6” length maximizes rear ride height on 2017 and newer trikes utilizing OEM shock mount plates • Eliminates the need for a lift kit • Levels out trike models that sit low in the rear from the factory • Reduces dragging and scuffing of mufflers when rolling through drain basins, backing up to curbs, or loading on a trailer • Easier steering due to less trail in the front end • All the benefits of the Legend AIR suspension systems above, plus six external knob adjustments allow fine tuning of rebound damping • Rebound adjustable for optimum performance and comfort for any given rider weight or personal riding style • Optional chrome handlebar-mounted control sold separately (PART #0616-0207) • Optional fairing mounted matching gauges (PART #s 2212-0484, 2212-0485, 2212-0492, 2212-0493, 2212-0494) sold separately PART NO. DESCRIPTION 1311-0189 For 17-25 FLHTCUTG/FLRT, 23-25 FLTRT PART NO. DESCRIPTION 1311-0190 For 17-25 FLHTCUTG/FLRT, 23-25 FLTRT NOTE: Shocks are designed to be installed using the OEM lower shock mount brackets. NOTE: Not compatible with aftermarket lift kits. • Includes OEM-looking black handlebar mounted control for easy “on-the-go” adjustability • Optional chrome handlebar-mounted control sold separately (PART #0616-0207) • Optional fairing mounted matching gauges (PART #s 2212-0484, 2212-0485, 2212-0492, 2212-0493, 2212-0494) sold separately NOTE: Shocks are designed to be installed using the OEM lower shock mount brackets. NOTE: Not compatible with aftermarket lift kits. 14 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
EZ INSTALL 11/ 4” FLAT TOP HANDLEBAR KITS • EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and install them on your motorcycle • Handlebars now come wired for your handlebar controls; and include an installed throttle-by-wire sensor • Our top corner feature is a non-welded corner we machine from billet steel with a smooth internal wire cavity that won’t damage the internal wiring • CNC mandrel-bent from 11/ 4” diameter x 0.120” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship • Available in chrome or gloss black powdercoated finishes • Gloss black bars come with black lines/cable extensions, chrome bars come with braided lines/cable extensions (unless noted) EZ INSTALL +2” PLUS HANDLEBAR INSTALLATION KITS • Include all necessary components needed to install handlebars • Installs without removing the exhaust and draining the transmission oil • Removes and replaces all OEM plastic tubes, connectors and adjusters with upgraded metal parts • Moves the cable adjuster next to the clutch lever for easier adjustment, no tools needed • Kit contents include: CAN bus wire harness for controls, +2” EZ install upper clutch cable, brake line extension, ropes, lube, cable ties CHROME PART NO. GLOSS BLACK PART NO. END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLHXSE, 24 FLHX (1” DIA. CLAMPING AREA) 0601-6818 0601-6819 11” 34” 151/2” 12” 0601-6820 0601-6821 12” 36” 151/2” 9” 0601-6822 0601-6823 14” 36” 151/2” 9” FOR 23-24 FLTRXSE, 24 FLTRX (11/4” DIA. CLAMPING AREA) 0601-6824 0601-6825 14” 35” 101/4” 8” 0601-6826 0601-6827 16” 35” 101/4” 8” BRAIDED PART NO. BLACK VINYL PART NO. BAR HEIGHT FOR 24 FLHX, 23-24 FLHXSE 0662-1271 0662-1272 11” 0662-1271 NOTE: Our handlebar kits do not replace existing lines and cables. We extended them. NOTE: Accept OEM heated grips. NOTE: Heated grip extension sold separately. NOTE: U.S. Patent No. 10,946,926. 0601-6818 0601-6827 15 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
MAGNETIC TRANSMISSION DIPSTICKS • 2000 Gauss magnet removes harmful metals from your engine • Positioned in the running oil flow for maximum filtering • Remove anytime to check engine health • Anti-corrosive components protect your ride from the elements • 316L Marine-grade stainless steel with polished jewelry-grade finish • Sold each PERFORMANCE OIL FILTER • Heavy-duty steel casing features a pre-drilled welded hex nut for easy removal and installation • Performance filter features premium high flow tri-fiber filtration media which stops more contaminants from reaching critical engine components • Racing technology engineered for everyday use and standard service intervals • Fully compatible with all oil types REPLACEMENT GASKETS • High-quality products for long-term reliability • Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle • Gaskets available in multiple types to best suit the intended application ASSAULT DERBY COVERS • Billet machined 6061-T6 aluminum construction • Acrylic see-through window • Matches the Trask Assault series air cleaners and cam covers (sold separately) PART NO. DESCRIPTION FOR 07-24 TOURING, 09-24 H-D TRIKE, 07-24 SOFTAIL, 06-17 DYNA 1105-0270 Curved chrome 1105-0271 Curved black 1105-0272 Knurled chrome 1105-0273 Knurled black FITS MODEL REPLACES OEM # PART NO. 21-24 RA1250/1250S/1250SE 62700280 0712-0678 22-24 RH975/975S/1250S 62700280 0712-0678 OEM # DESCRIPTION MATERIAL/THICKNESS PART NO. QTY. FOR 21-24 RA1250/S, RH975/S AND RH1250S 16500668 Head gasket (except RH975/S) MLS, 0.024” 0934-7886 2 pk. 16500670 Base gasket Viton coated steel, 0.010” 0934-7885 2 pk. 25700981 Coolant manifold cover Rubber coated and embossed steel 0.012” RC 0934-7887 ea. PART NO. DESCRIPTION FOR 16-24 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK/H-D FL TRIKE, 15 FLHTCUL/FLHTKL 1107-0749 Matte black 1107-0750 Reverse cut FOR 99-18 BIG TWIN (EXCEPT 18 FLSB, 16-18 DRESSER, 14-15 FLHTCUL/FLHTKL) 1107-0751 Matte black 1107-0752 Reverse cut PART NO. DESCRIPTION FOR 19-24 SOFTAIL, 18 FLSB AND 18 SOFTAIL W/ NARROW PROFILE PRIMARY COVERS (EXCEPT 22-24 FXLRST) 1107-0754 Matte black 1107-0755 Reverse cut 1107-0752 1107-0749 1107-0755 • Multi-Layer Steel (MLS) gaskets feature two outer Viton®-coated embossed spring steel layers with an inner steel layer to provide additional support • Viton® gaskets feature a stainless steel core with a 0.001”-thick coating of Viton rubber on both sides 1105-0270 1105-0272 1105-0271 1105-0273 0934-7885 0934-7887 0934-7886 16 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
FOG LIGHT HARNESS CONNECTOR • Male connector with terminals and wire seals • Replaces OEM #69202285 • Sold each TRAILER ISOLATOR • Protects factory turn signal module from being overloaded when adding a trailer • 4-wire connection • Plugs in between the rear fender harness and receives the signals from the lighting circuits • Draws power from the motorcycle battery HANDLEBAR WIRING HARNESS • Replaces the OEM handlebar switch wiring • OEM color-matching wires • Loomed in polyoefin heat shrink • 50” total length; 18” longer than stock harness • Direct plug-in; does not require cutting/splicing COMPLETE BIKE HARNESS • Complete custom bike harness with starter relay, 3-circuits, self-canceling and run, brake and turn signal module • Harness provides turn signal only function with separate run light wiring for white/amber LEDs • Works with any stand alone, Evo or Twin Cam ignition system • Designed to operate with a two-position key switch • Key start switches can be used with a simple wiring modification (ignition system and key switch are not included with this harness) • OEM color-matching harness with 11-second self-canceling turn signal module • Fuse block holds a full-size, commonly available and replaceable starter relay and three ATO fuses • 30A circuit breaker is installed and ready for any regulator/charging system • Run, brake and turn signal functions for the rear turn signals • Oil, neutral, high beam and turn signal indicator wiring • Color-matching handlebar switch wiring, as found on most 96-13 models (except Dresser models) • Headlight wiring with headlight socket and terminals • Front turn signal connectors and terminals • Rear fender harness with connectors and terminals • Key switch wiring with ring terminals • Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals • Sections of 3/16”, 1/4”, 3/8” and 1/2” ID heat shrink included • Heavy-gauge, 12 (+) power and (-) ground wires with terminals for battery connection PART NO. DESCRIPTION 2120-1405 For 23-24 FLHX/FLHXSE, FLTRX/FLTRXSE/FLTRXSTSE PART NO. DESCRIPTION 2010-1552 For 20-24 Challenger/Dark Horse/Elite/Limited PART NO. DESCRIPTION 2120-1404 For 24 FLTRX/FLTRXSE/FLTRXSTSE/FLTRK/FLHX, 21-24 RA1250/S PART NO. DESCRIPTION 2120-1403 Complete harness 17 DRAGSPECIALTIES.COM MAY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
SHIFT LEVERS • Billlet 6061 aluminum construction • 1” shorter than stock for easier reach (8.2” L) • Shift levers can be paired with any TSC shifter tips (sold separately) • ARP® hardware included PART NO. DESCRIPTION FOR 18-24 SOFTAIL W/ MID CONTROLS 1602-1657 Chrome 1602-1656 Black SPEEDLINER SOFTAIL SHIFT ARMS • CNC machined from billet aluminum and feature am easy bolt-on design • 3D knurled billet design drastically enhances foot control styling while keeping great foot traction • Include a custom shift peg spacer that when installed extends the length of the shift peg for added leg clearance • Matching brake arm and grips available separately PART NO. DESCRIPTION FOR 18-24 SOFTAIL W/ FACTORY MID CONTROLS 1623-0618 Chrome 1623-0617 Black anodized 1623-0619 Blue anodized PART NO. DESCRIPTION FOR 18-24 SOFTAIL W/ FACTORY MID CONTROLS (CONT) 1623-0620 Gold anodized 1623-0621 Red anodized SPEEDLINER BRAKE ARMS • CNC machined from billet aluminum and feature an easy bolt-on design • 3D knurled billet design drastically enhances foot control styling while keeping an overall clean look • Forged single piece brake arm for optimum strength and durability PART NO. DESCRIPTION FOR 18-24 SOFTAIL W/ FACTORY MID CONTROLS 1623-0616 Chrome 1623-0615 Black anodized 1623-0622 Blue anodized PART NO. DESCRIPTION FOR 18-24 SOFTAIL W/ FACTORY MID CONTROLS (CONT) 1623-0623 Gold anodized 1623-0624 Red anodized 1602-1656 1602-1657 • Include a custom brake peg spacer that when installed extends the length of the brake peg for added leg clearance • Matching shift arm and grips available separately 1623-0617 1623-0618 1623-0619 1623-0620 1623-0621 1623-0615 1623-0616 1623-0622 1623-0623 1623-0624 18 MAY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=