BASSANI EXHAUST Founded in 1969, Bassani Xhaust continues to be a leader in performance exhaust for V-Twin motorcycles. Every system is engineered to ensure maximum performance gains and built to the highest quality standards. The new mid-length superbike systems for the latest M-Eight Touring models continue that tradition. Add performance, style and some ‘Bassani thunder’ with a system from Bassani Xhaust. MID-LENGTH SUPER BIKE 2-INTO-1 EXHAUST SYSTEM • Hand MIG-welded headers with black powdercoat finish • Hand TIG-welded stainless steel muffler construction with a black powdercoat finish • 13/ 4” headpipes step up to 1 7/ 8” into the collector to increase flow and improve performance • 4” OD diameter straight can 11” muffler body with black aluminum end cap • Removable spiral-core louvered baffle features an all-new aggressive sound • 18 mm and 12 mm O2 ports with adapters and plugs • High-temperature black powdercoated mild steel heat shields and mounting hardware included NOTE: When installing on CVO models, it is recommended to use Bassani floorboard spacer kit PART #1621-1205 (sold separately see the 2025 Drag Specialties FatBook). PART # DESCRIPTION EMIS* 1800-2737 For 17-25 FLHT/FLHX/FLHR/FLTRX 3 PART # DESCRIPTION EMIS* FOR 95-16 FLHT/FLHR/FLTRX/FLHX 1801-1839 Chrome 3 PART # DESCRIPTION EMIS* FOR 95-16 FLHT/FLHR/FLTRX/FLHX (CONT) 1801-1840 Black 3 4.5” STRAIGHT CAN MUFFLERS • Straight can mufflers with a specially designed baffle that is acoustically tuned to deliver a unique exhaust sound while providing maximum performance • Includes black billet end caps with external machined flutes • Sold in pairs 1801-1840 1801-1839 THE DRAG SPECIALTIES JUNE 2025 DRAGSPECIALTIES.COM JUNE 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* 1800-2712 For 17-24 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 3 2-INTO-2 DOMINATOR EXHAUST SYSTEM • Features full 2” left side crossover and 41/ 2” muffler bodies with 2” inlets • 1 3/ 4” to 1 7/ 8” to 2” high-flow 16-gauge three stepped primary headers • Enlarged interconnected headers make for improved horsepower and low-end torque • 2 1/ 2” 220° 16-gauge heat shields • Baffles are wrapped in stainless steel wool and high-temp fiberglass for a rich mellow tone • Heavy-duty AccuSeal® reaction-block header-to-muffler clamps included • Comes in Eclipse® finish with Klassic tips • 18 mm and 12 mm O2 bungs welded into the primaries PART # DESCRIPTION EMIS* FOR 18-22 FXBB/FXBBS/FXLR/FXLRS/FLSL/FLHC/FLHCS/FLDE/FLSB/FXST (EXCEPT FXDR/FLFB/FXBR) 1800-2728 Chrome 1 1800-2727 Matte black 1 PART # DESCRIPTION EMIS* FOR 19-20 FXDR, 18-22 FLFB/FLFBS, 18-20 FXBRS, 18-19 FXBR 1800-2730 Chrome 1 1800-2729 Matte black 1 SHORTSHOTS STAGGERED PCX™ EXHAUST SYSTEMS • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • Full-coverage heat shields • Include mounting hardware and installation instructions 1800-2729 1800-2728 2 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24 FLHTK, 14-23 FLHTK/FLHT/FLHX, 14-24 FLHTCUTG (EXCEPT 23 FLHXSE) 2350-0583 Chrome 2350-0584 Black SOLAIRE LED WINDSHIELD TRIM • Intense bright white light with sequential amber turn signals • Plug-and-play installation • No drilling required; sits below the windshield and creates a spread of light • Bolts on using factory windshield mounting location • Stainless steel hardware included • Multi-layered lens construction • Made in the U.S.A. NOTE: 14-22 FLHXSE and 14-21 FLHTKSE require removal of original trim. PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTE 0630-3283 Chrome 0630-3284 Black CHICANE™ GRIPS • Give superior feeling of control and vibration damping in a cool looking package • Aluminum construction and stainless steel hardware • Metal cage surrounds EPDM rubber pads over a polymer base • Super durable for years of excellent performance • Works with the Chicane™ Throttle Wing (sold separately) • Matches the line of Ciro® Chicane™ products • Sold as a pair 2350-0584 2350-0583 0630-3284 0630-3283 PART # DESCRIPTION 3515-0244 EXFIL-7 2.0 bag EXFIL-7 2.0 BAG • MOLLE system on exterior allows for versatile configuration • One main and three secondary pockets offer plenty of room for gear, maps, and other essentials • Fully customizable for different applications and mounting locations; including frame’s down tubes, above the headlight, on tall and mid-sized handlebars and, of course, on both sides of sissy bars • Rugged, rust-free nylon zippers throughout • UV-treated, 1680D polyester nylon construction • Duraflex quick-release buckles with adjustable nylon straps for stowing a base layer or small bedroll • External chassis panels are PVC backed for added water resistance • Zippered pockets in lid and back panel with anti-rattle zipper pulls • Hi-viz orange nylon interior makes spotting contents easier • Interior volume holds seven 12 oz. cans • Main dimensions: 11” W x 5.75” H x 4.75” D • Large pocket dimensions: 9.75” W x 5.75” D with 8” opening • Small pocket dimensions: 5.75” W x 4.25” D with 4.5” opening PART # DESCRIPTION 3515-0217 D2100 universal tail bag D2100 UNIVERSAL TAIL BAG • Sleek styling and rigid construction keeps this bag looking good full or empty • Made of rugged leather-grain, marine-grade vinyl and plastic reinforced panels • Easy-open hatbox-style lid allows for convenient access while protecting against weather, grime and other elements • Multiple mounting options are adaptable to any bike, attaching to the sissy bar, rack or on top of the passenger seat • Easy-to-use sissy bar strap, multiple anchor points, four heavy-duty D-rings and several strap slots allow for quick, easy mounting • Riveted top handle and removable shoulder strap make for convenient transport off the bike • A pair of waterproof, zippered and flap-covered side pockets provide extra storage • Hanging internal mesh pocket provides separate storage and an extra organizational option • Dimensions: 15” L (does not include side pockets) x 11” W x 12 3/ 4” H 3 DRAGSPECIALTIES.COM JUNE 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
BRL RACE BUBBLE WINDSHIELD The BRL Race Bubble Windshield is designed for performance-driven riders, brings track-inspired aerodynamics and style to your race or street setup. Designed specifically for high-speed racing and performance, but also fits stock fairing. Provides track-inspired aerodynamics while maintaining a sleek, aggressive look that complements your bike - featuring a sleek, aggressive profile. Made from durable, clear 1/8” Lucite, it provides the same performance edge that top racers in the Bagger Racing League rely on. Foam adhesive-backed pads protect your fairing, and the included hardware ensures easy installation, whether you're preparing for the track or hitting the streets. Take your performance bagger to the next level with the BRL Race Bubble Windshield, designed for speed, style, and functionality. • Fits 2015 - 2023 Road Glide Fairing • A sleek, aggressive profile • Designed for performance-driven riders, brings track-inspired aerodynamics and style to your race or street setup. • Designed specifically for high-speed racing and performance, but also fits stock fairing. Provides track-inspired aerodynamics while maintaining a sleek, aggressive look that complements your bike. • The exact windshield ran by racers in the Bagger Racing League • Made from Clear 1/8” Lucite • Windshield hardware included. Additional hardware included for bare fairing shell for the track MODEL YEAR COLOUR Road Glide Custom FLTRX 2015-2023 Clear Road Glide Special FLTRXS 2015-2023 Clear Road Glide ST FLTRXST 2022 Clear Road Glide Limited FLTRK 2020-2023 Clear CVO Road Glide Custom FLTRXSE 2018-2020 Clear Road Glide Ultra FLTRU 2016-2019 Clear CVO Road Glide Ultra FLTRUSE 2015-2016 Clear Note: Includes attachment hardware Note: Includes attachment hardware MODEL YEAR COLOUR Road Glide Custom FLTRX 2015-2023 Dark Black Smoke Road Glide Special FLTRXS 2015-2023 Dark Black Smoke Road Glide ST FLTRXST 2022 Dark Black Smoke Road Glide Limited FLTRK 2020-2023 Dark Black Smoke CVO Road Glide Custom FLTRXSE 2018-2020 Dark Black Smoke Road Glide Ultra FLTRU 2016-2019 Dark Black Smoke CVO Road Glide Ultra FLTRUSE 2015-2016 Dark Black Smoke DARK SMOKE 2310-0962 CLEAR 2310-0933 4 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DESCRIPTION PART # FOR 15-23 SCOUT/SCOUT SIXTY (EXCEPT SCOUT BOBBER); 29” L OVERALL (11 3/4” L X 12 1/2” W FRONT) (11 1/2” L X 6 3/4” W REAR) Smooth 0810-2118 Classic stitch 0810-2121 PREDATOR III SEATS • Automotive-grade vinyl cover • Features a 6” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint 0810-2121 0810-2118 DESCRIPTION PART # FRONT SOLO SEATS (15” L OVERALL X 10” L X 12 3/4” W) Smooth 0810-2256 Black, diamond stitch 0810-2257 BOBBER-STYLE FRONT AND REAR SOLO SEATS FOR INDIAN SCOUT BOBBER 18-23 • Looks like a vintage spring solo seat, but is rigid-mounted • High-quality automotive-grade vinyl • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Features a 5 1/ 2” tall driver support • Front seats can be used with or without rear solo seat • Rear seat PART #0810-1993 features solar-reflective leather in the seating area and automotive-grade vinyl on the sides; the unique finishing process has been shown to reduce surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl • Rear solo seat will work with OEM solo seats, sold separately • All will work with the OEM driver backrest bar • Includes all mounting hardware 0810-2256 0810-2257 DESCRIPTION PART # FOR 14-21 CHIEF, 14-23 CHIEFTAIN/CHIEFTAIN VINTAGE/CLASSIC/LIMITED, 16-22 DARK HORSE, 17-23 SPRINGFIELD, 15-23 ROADMASTER; 32" L OVERALL (14 3/4” L X 14 3/4” W FRONT) (15” L X 11” W REAR) Double diamond, black thread 0810-2274 Double diamond, silver thread 0810-2275 Double diamond, red thread 0810-2276 • Features solar-reflective leather in the seating area and automotive-grade vinyl on the sides (unless noted); the unique finishing process has been shown to reduce surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance to ground contact • Features a 5” tall driver support • Seat moves the rider forward 1” and ½” lower compared to the factory seat • Seat is 2” further forward compared to stock seat • Includes all mounting hardware 0810-2274 0810-2275 0810-2276 LOW-PROFILE TOURING SEATS WITH FORWARD-POSITIONING 5 DRAGSPECIALTIES.COM JUNE 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1848 Double diamond seat w/ burnt orange thread 0801-1846 Cordova seat TAILWHIP SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover • Highly detailed powdercoated steel carpeted base PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0822-0610 Black w/ black stitching DELUXE TOURING EXTENDED PASSENGER ARM TOUR-PAK® PAD • Extends backrest arms by 2” • Deluxe pattern with decorative stitch • Fits King Tour-Pak® only PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0822-0609 Black w/black stitching DELUXE TOURING CHOPPED TOUR-PAK® PAD • Features Deluxe pattern with an eye-catching carbon fiber inlay • Provides comfort for passenger with contoured design • Designed for Chopped Tour-Pak® only 0801-1846 0801-1848 0822-0609 DESCRIPTION PART # Brown, smooth 0822-0316 BACKREST PAD FOR 15-23 SCOUT/SCOUT SIXTY • High quality automotive-grade vinyl cover • Features a faux brown leather construction • Internal baseplate is 14-gauge steel • Bolts directly to OEM accessory backrest bar #s 2880231-156, 2880871-156 and 2880985-156 • Measures 9” W X 5 3/ 4” H • Includes all mounting hardware 6 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART NO. DESCRIPTION EMIS* 1012-0268 For 99-16 Touring, 00-17 Softail and 99-17 Dyna 2 ROCKER BOX BREATHER REBUILD KIT • Fits Feuling® and OEM Twin Cam rocker box breathers • Includes umbrella valves, filters and gaskets PART # DESCRIPTION 1120-0463 For 11-25 Touring, 09-25 H-D Trike, 12-25 Softail, 12-17 FXD/FXDWG/ FLD and 07-12 Twin Cam w/ updated Screamin’ Eagle compensator COMPENSATOR SPRING • Performance compensator replacement spring • Thicker, stronger and an increased bevel over stock • Features a steeper bevel that provides more preload and pressure on the spring pack and compensator • Helps diminish excessive compensator travel in turn reducing harmonics, eases start up and gives a more responsive feel at lower engine rpms • Replaces the first, outer most spring in compensator spring pack OEM #83936-09A NOTE: Feuling® spring is not a fix for excessively worn and/or damaged compensators. PART # DESCRIPTION EMIS* 1012-0265 Replacement breather line, filter element, female quick-disconnect breather line fitting and zip-ties 3 1012-0267 Replacement polished dipstick cap 3 REPL. COMPONENTS FOR ALL FEULING® VENTED DIPSTICKS • Fits all Feuling® vented dipsticks in the 2025 Drag Specialties FatBook • Replacement cap includes cap o-ring and set screw NOTE: Feuling® in-house testing shows venting the air cleaner to atmosphere may be problematic resulting in oil carry over/misting out of the breathers. When air filter venting is accompanied with the use of oil tank venting such as the Feuling vented dipstick and/or a vented transmission top cover, the oil carry over/misting can be increased. PART # DESCRIPTION 0934-8038 For PART #s 0940-1871, 0940-1872, 0940-1873 PART # DESCRIPTION 0934-8037 For PART #s 0940-1848, 0940-1849, 0940-1850 ASSAULT SERIES CAM COVER REPAIR KITS • Includes everything to repair Trask Assault Series cam covers (sold separately) PART # DESCRIPTION 1107-0757 For PART #s 1107-0637, 1107-0638, 1107-0639 1107-0758 For PART #s 1107-0640, 1107-0641, 1107-0642 PART # DESCRIPTION 1107-0759 For PART #s 1107-0684, 1107-0685, 1107-0686 ASSAULT SERIES DERBY COVER REPAIR KITS • Includes necessary materials to repair Trask Assault Series Derby Covers (sold separately) 0934-8038 0934-8037 1107-0757 1107-0758 1012-0265 1012-0267 7 DRAGSPECIALTIES.COM JUNE 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3277 Chrome 2 1010-3278 Black 2 SUPER GAS AIR CLEANERS • Air cleaners include a K&N® filter behind a stainless steel wire mesh screen to allow high-volume airflow, resulting in increased horsepower 1010-3277 1010-3278 PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3274 Chrome 2 1010-3275 Contrast Cut™ 2 1010-3276 Black Ops™ 2 MAX HP AIR CLEANERS • CNC-machined aluminum backing plate • Internal rubber breather tubes to eliminate oil leakage • Internal power cone design for smooth, laminar airflow • Innovative conical design for improved knee clearance • Contrast Cut™ finish starts with a polished air cleaner that has been black anodized, then recut to open the design • Black Ops™ finish features gloss black on top of a contrasting textured black finish for outstanding durability and looks • All mounting hardware and gaskets included 1010-3275 1010-3276 1010-3274 PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3279 Chrome 2 1010-3280 Contrast Cut™ 2 1010-3281 Black Ops™ 2 VISION SERIES AIR CLEANERS • CNC-machined billet aluminum • Polycarbonate lens is resistant to scratches, UV, hazing and yellowing • Aluminum bezel prevents lens from cracking • Includes chromed hardware and gaskets • Contrast Cut™ finish features a polished surface that is black anodized, then recut to open the design • Black Ops™ finish features gloss black over a contrasting texture black finish for outstanding durability and looks PART # DESCRIPTION EMIS* 1010-3273 For 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2 C4 SERIES CARBON FIBER AIR CLEANER • Ground-breaking appearance with weight savings and performance gains • Embodies the essence of racing and modern design • Beautifully sculpted ultra-lightweight carbon fiber shell • Forward-facing reverse cone filter element • Comes with a Black Ops™ finish outer ring • Black Ops features a gloss black finish over a contrasting texture black finish 1010-3281 1010-3280 1010-3279 8 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
BIG SUCKER™ STAGE I AIR FILTER KITS WITH COVERS • All new next generation backing plate design • Increases horsepower and torque • Aluminum backing plate that features zero flat surfaces, every angle of the intake is designed to promote airflow • One-piece aluminum top filter plate with integrated air venturi to direct airflow into the throttle body • High performance filters are made from black pre-oiled cotton for the best in airflow and filtration • Filter is washable and reusable NOTE: Exempt per CARB Executive Order (E.O.) # D-639-13 for 2023-2024 EFI models only. PART # DESCRIPTION EMIS* FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 1010-3250 W/ chrome backing plate 1 1010-3251 W/ black backing plate 1 BIG SUCKER™ STAGE I AIR FILTER KITS WITHOUT COVERS • All new next generation backing plate design • Increases horsepower and torque • Aluminum backing plate that features zero flat surfaces, every angle of the intake is designed to promote airflow • One-piece aluminum top filter plate with integrated air venturi to direct airflow into the throttle body • High-performance filters are made from black pre-oiled cotton for the best in airflow and filtration • Filters are washable and re-usable • Accepts all Ness Stage I custom air cleaner covers; sold separately NOTE: Exempt per CARB Executive Order (E.O.) # D-639-13 for 2023-2024 EFI models only. 1010-3251 1010-3250 1010-3254 1010-3258 1010-3261 1010-3253 1010-3256 PART # DESCRIPTION EMIS* FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 1010-3261 Carbon, black 1 PART # DESCRIPTION EMIS* FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 1010-3254 Beveled, chrome 1 1010-3255 Beveled, black 1 1010-3258 Knuckle, chrome 1 1010-3259 Knuckle, black 1 1010-3256 10-Gauge, chrome 1 1010-3257 10-Gauge, black w/ machined accents 1 PART # DESCRIPTION EMIS* FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 1010-3252 Smooth, chrome 1 1010-3253 Smooth, wrinkle black 1 1010-3260 Smooth, polished 1 KIT W/ CARBON COVER KITS W/ ALUMINUM COVER KITS W/ STEEL COVER 9 DRAGSPECIALTIES.COM JUNE 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 96-24 H-D MODELS (EXCEPT FLHT/FLHTC/FLHTCU/FLHTCUTG/FLHX/FLHXXX, 15-24 FLTRX/FLTRU/FLTRK, 18-24 FLHRXS AND SPRINGER) 0601-6792 0601-6788 4” 31 1/2” 5 1/4” 1 1/2” 0601-6793 0601-6789 6” 33” 5 1/4” 3” 11/ 4” MACH MOTO HANDLEBARS • Ergonomically designed to change grip location with the rider as the bars get taller in size, yielding a more comfortable riding experience • Manufactured with the highest quality construction, including machined control mounts (not swaged), burr-free holes for internal wiring and slots for electronic throttle control • Available in 4” and 6” height options with chrome or gloss black finish for an unsurpassed appearance • All handlebars feature a 1 1/ 4” center diameter and have 3 1/ 2” on-center knurling • Work with standard controls, including hydraulic clutch and OE heated grips • CNC mandrel bent for an accurate fit • Preloaded with E-Z pull-thru sleeving to make wiring installations easier NOTE: Installation of these bars will require risers that accept 1 1/ 4” center diameter handlebars. CHROME PART # GLOSS BLACK PART # END RISE WIDTH RISER WIDTH PULLBACK FOR 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE/FLTRXSTSE 0601-6705 0601-6706 10” 32 1/2” 3” 7” 0601-6707 0601-6708 12” 32 1/2” 3” 7” 0601-6709 0601-6710 14” 32 1/2” 3” 7” 11/ 4” ONE-PIECE PULLBACK KAGE FIGHTER T-BARS • High-strength steel tubing construction • Crossbars are welded directly to the risers • Accept stock controls • 3 1/ 2” on-center risers • Designed for internal wiring NOTE: Installation on FLHX/FLHXSE models will require modifications. 0601-6792 0601-6788 0601-6705 0601-6710 DESCRIPTION CHROME BLACK FRONT RIMS 19” x 3.25” 0210-0431 0210-0429 21” x 3.50” 0210-0433 0210-0432 21” x 5.50” 0210-0435 0210-0434 DESCRIPTION CHROME BLACK FRONT/REAR RIMS 18” x 5.50” 0210-0428 0210-0427 FORGED BILLET SPLIT-SPOKE RIMS • All rims are CNC machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Rims can be used on both front and/or rear applications when correct hub kit is installed • Rims accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings NOTE: Arlen Ness hub kits must be purchased separately to install; see the 2025 Drag Specialties FatBook. 0210-0431 W/ HUB KIT INSTALLED 0210-0427 W/ HUB KIT INSTALLED 10 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
FAT BAGGERS, INC. Fat Baggers now has handlebar kits available for the latest H-D Touring models. The handlebars in these kits are pre-wired and ready to install - just open the box, bolt on the handlebars, plug them in, and go! It is the best way to get that ‘just-right’ fit and feel from custom handlebars in a convenient, clean kit. Fit a pair and enjoy the comfort and style of handlebars from Fat Baggers. CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLHXSE, 24 FLHX (1” DIA. CLAMPING AREA) 0601-6828 0601-6829 11” 34” 15 1/2” 12” 0601-6830 0601-6831 12” 36” 15 1/2” 9” 0601-6832 0601-6833 14” 36” 15 1/2” 9” FOR 23-24 FLTRXSE, 24 FLTRX (11/4” DIA. CLAMPING AREA) 0601-6834 0601-6835 14” 35” 10 1/4” 8” 0601-6836 0601-6837 16” 35” 10 1/4” 8” EZ INSTALL 11/ 4” POINTED TOP HANDLEBAR KITS • EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and install them on your motorcycle • Handlebars now come wired for your handlebar controls • Our top corner feature is a non-welded corner we machine from billet steel with a smooth internal wire cavity that won’t damage the internal wiring • CNC mandrel-bent from 11/ 4” diameter x 0.120” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship • Available in chrome or gloss black powdercoated finishes • Gloss black bars come with black brake line extensions/cable extensions, chrome bars come with braided stainless brake line extensions/cable extensions NOTE: Our handlebar kits do not replace existing brake lines. We extended them. NOTE: Accepts OEM heated grips. NOTE: Heated grip extension sold separately. NOTE: U.S. Patent No. 10,946,926. 0601-6837 0601-6828 11 DRAGSPECIALTIES.COM JUNE 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 8” 0602-1556 Chrome 0602-1555 Black PART # DESCRIPTION 10” 0602-1554 Chrome 0602-1553 Black ASCENT PRO PULLBACK RISER KITS • CNC machined from billet aluminum • Black anodized and chrome finishes • Available in 8” and 10” height • 1 1/ 4” bar clamp size • 1.5” pullback • All hardware included • Fits all H-D models with 31/ 2” on-center handlebars PART # DESCRIPTION FOR 22-23 FXLRS 2210-0694 Chrome 2210-0693 Black ROUND GAUGE BEZEL KIT FOR ASCENT PRO RISERS • CNC machined from billet aluminum • Black anodized or chrome finish • All hardware included • Designed to mount the OEM speedometer or a Koso H-D 04 Round speedometer (PART #2211-0172) to Kodlin® Ascent Pro Risers PART # DESCRIPTION FOR 18-24 FXBB/FXBR, 22-24 FXLRST AND 20-24 FXST 2212-0911 Chrome 2212-0910 Black DIGITAL GAUGE BEZEL KITS FOR ASCENT PRO RISERS • CNC machined from billet aluminum • Black anodized or chrome finish • All hardware included • Designed to mount OEM instrument cluster to Kodlin® Ascent Pro Risers 0602-1554 0602-1553 2210-0694 2210-0693 2212-0911 2212-0910 PART # DESCRIPTION 0615-0397 Chrome PART # DESCRIPTION 0615-0396 Black PART # DESCRIPTION 0615-0398 Twice-cut SPEEDWAY CLUTCH AND BRAKE PERCH CLAMPS • Designed to work with stock H-D clutch and brake perches on 1” bars • Sleek design with intricate ball-end work • CNC-machined 6061 aluminum • Comes in a left and right pair • Include ARP® stainless steel, 12-point mounting hardware 0615-0396 0615-0397 0615-0398 PART # DESCRIPTION 0632-1008 Black 0632-1009 Gold THROTTLE TUBES • Compatible with Thrashin® Bolt and Moto grips as well as most aftermarket 1” grips • Throttle tube grip area is 4.5” long 0632-1008 0632-1009 FOR 24-25 FLHX/FLHXSE/FLTRX/FLTRXSTSE AND 25 FLFB/FLHC/ FXBB/FXBR/FXLRS/FXLRST FOR 99-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, 00-24 SOFTAIL, 99-17 DYNA AND 96-03 XL 12 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION MATERIAL/THICKNESS FOR 17-23 M-EIGHT 0934-8042 4.5” bore MLX, 0.052” REPLACEMENT MLX HEAD GASKETS • MLX Gasket (Multi-Layer-Xtreme) features an extra “stopper” fold-over layer providing a torque limiting surface that prevents yielding of the combustion seal • Proprietary high-temperature coatings along with embossments provide a micro seal for fluids against the head and block surface • MLX head gaskets are essential for all M-Eight applications using a turbo, high compression, nitrous or any power adding modifications • Require no special machining and are installed like a regular MLS head gasket • Sold in pairs PART # DESCRIPTION MATERIAL/THICKNESS FOR 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLTRX/FLTRXSTSE 0934-8043 4.250” bore MLS, 0.040” 0934-8044 4.250” bore MLS, 0.030” 0934-8045 4.310” bore MLS, 0.040” 0934-8046 4.310” bore MLS, 0.036” REPLACEMENT HEAD GASKETS • High-quality products for long-term reliability • Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle • Multi-Layer Steel (MLS) gaskets feature two outer Viton®-coated embossed spring steel layers with an inner steel layer to provide additional support • Sold in pairs 0934-8043 REPLACEMENT SPEAKER GRILLS • Upgrade your basic stock plastic grills in no time! • Upgraded grills are far less restrictive than factory grills, allowing much more of the speaker to show for improved volume • Attractive black trim around black metal mesh • Easily and quickly upgrade the look & performance of your fairing speakers • Includes factory style "clips" and gaskets pre-installed • Re-use the factory bolt to secure upgrade grill to bike • 1mm thick metal mesh grills come painted gloss black • Can be used with most replacement speakers PART NUMBER DESCRIPTION 2024 MODELS WITH 12.3" TFT SCREEN 4405-1032 WBA Road Glide Grill 4405-1033 WBA Street Glide Grill 4405-1033 WBA STREET GLIDE GRILL 4405-1032 WBA ROAD GLIDE GRILL 13 DRAGSPECIALTIES.COM JUNE 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
ÖHLINS Öhlins suspension has been a cornerstone of motorcycle and motorsports top level suspension systems for more than 45 years. Now available - NIX 22 cartridge kits for late-model H-D Touring models to dramatically improve the performance of the front suspension to give your bike added comfort and control on every ride. PART # LENGTH RATE N/MM STROKE FOR 91-17 DYNA FXD 1310-23851,2 12.007” 32 2.677” 1310-23863 12.007” 32 2.677” 1310-23874 12.007” 32 2.755” 1310-23903 13.228” 32 2.913” 1310-23894 13.228” 32 3.582” 3 Adjustable rebound damping 4 Piggyback reservoir w/ adjustable rebound and compression damping. 1 Non-adjustable rebound 2 Nitrogen-charged with internal divided piston. STX 36 BLACKLINE SHOCKS • 1.417” (36 mm) piston diameter • Multiple spring rates available • Hard-anodized, CNC-machined components • Length adjustable by 0.393” • High-pressure nitrogen gas charged • Adjustable preload with billet tool • Low-friction shaft and seal head design • Fully serviceable PART # DESCRIPTION 0414-0762 For 17-24 FLHT/FLHX/FLHR/FLTRX w/ conventional forks NIX 22 FORK CARTRIDGE KIT • Öhlins NIX technology separates compression and rebound damping circuits allowing adjustments to one circuit without affecting the other, unlike many other systems • External compression and rebound adjustment • External preload adjustment • 12 N/m and 13 N/m springs included • 1” lowering kit included 1310-2386 1310-2389 • Pull up tool and stopper plate included • 22 mm piston diameter • Öhlins setting databank helps achieve the ride you want NOTE: Not for 21” wheel bikes. NOTE: This kit requires PART #OH01309-01 (2 pc.) sold separately. 14 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 80-24 FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) 1310-2451 Ultra low, standard 1310-2453 Ultra low, heavy-duty 1310-2452 Ultra Touring, standard PART # DESCRIPTION FOR 80-24 FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) CONT'D 1310-2454 Ultra Touring, heavy-duty 1310-2455 Ultra Touring, super-duty 944 FST ULTRA TOURING/LOW SHOCKS • Unique Ultra touring spring configuration provides the superb ride quality and suspension travel of a 13” shock but the custom lowered look of a 12” shock • Ultra Low Series shocks are designed to sit even lower; 2” lower than a stock Touring model • Built around Progressive Suspension’s Frequency Sensing Technology (FST) • Allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality • 944 FST Ultra Touring shocks are available in three configurations: Standard (Up to 250 lbs.), Heavy-duty (250 to 350 lbs.) and Super Heavy Duty (350+ lbs.) • Unique spring combination delivers a lower rider height while being ridden or on a side stand, allowing you better control both at intersections and when parking • Adjust spring preload by hand; no special tool needed • Progressive rate mainsprings specifically designed for touring models • High-pressure gas charged for consistent performance NOTE: Super-duty applications are recommended for bikes operating above the manufacturer’s maximum load rating over 50% of the time. NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues, such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact. PART # DESCRIPTION 21” FRONT WHEEL 1401-1087 Henry 1401-1088 Level PART # DESCRIPTION 21” FRONT WHEEL (CONT) 1401-1089 Slicer 1401-1091 Wrapper HUGGER SERIES FRONT FENDERS FOR DRESSERS • Stamped steel 14ga fender for a smooth consistent finish • 13-step E-coated factory-style finish for corrosion resistance • Laser cut, predrilled for a perfect fit • Experience increased torsional rigidity as the stronger steel acts as a base • Fenders include black E-coated mounting blocks and mounting hardware 1401-1087 1310-2451 FOR 23-24 FLTRXSE/FLHXSE/FLTRXSTSE 15 DRAGSPECIALTIES.COM JUNE 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1401-1100 For 24-25 FLHX/FLTRX CUSTOM RETRO FRONT FENDER • Easy way to give a bike a retro look • Heavy-gauge raw steel construction • 14-gauge stamped • Laser-trimmed for accuracy • 6” W for 19” front tires PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX (EXCEPT 23 FLHXSE/FLTRXSE) 2120-1416 Chrome frame 2120-1413 Black frame ILLUMINATED SADDLEBAG LICENSE PLATE MOUNT • Secure, clean way to custom-mount your license plate • Mount hangs on the saddlebag and is held in place by the lid • When parked, can easily place then entire mount inside the saddlebag for security and a super-clean look • White LEDs illuminate the license plate with installed terminals • Aluminum backing plate with installed wire grommet • Frame accepts standard 4” x 7” license plates • Direct plug-in installation, no cutting or splicing wires 2120-1413 2120-1416 PART # DESCRIPTION 0404-0704 Chrome 0404-0705 Black Diamond Like Carbon (DLC) coating 0404-0706 Gold 49 MM FORK TUBES • Fit a wide variety of models • 23.75” L • Chrome, gold or Black Diamond Like Carbon (DLC) coating finish • Accept all OEM components • Sold in pairs 0404-0706 0404-0705 0404-0704 PART # DESCRIPTION 1401-1101 For 24-25 FLHX/FLTRX CUSTOM FRONT FENDER • Heavy-gauge steel construction • Fenders are inspected individually to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork • Comes pre-drilled with raw spacers for easy installation • Recessed/dimpled for added strength and rigidity • LS-2 style fenders follow the curvature of the wheel/tire and have a straight-cut lower edge • 6” W for 23” front wheels NOTE: All measurements are approximate. FOR 18-24 FLDE/FLHC/FLHCS/FLSL/FXBB/ FXBBS/FXBR/FXBRS/FXLR/FXST 16 JUNE 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=