TRUE DUAL 2-INTO-2 DRAG PIPE EXHAUST • Aggressive style and sound with a classic look • Features 1 3/ 4” headpipes that flow into classic 2 1/ 4” drag pipe bodies • Chrome finish with chrome heat shields • End caps are billet aluminum with a black finish • O2 sensor ports with plugs • Include removable baffles • Made in the U.S.A. PART # DESCRIPTION EMIS* FOR 86-17 SOFTAIL 1800-2734 Chrome 3 1800-2735 Black 3 PART # DESCRIPTION EMIS* FOR 86-17 SOFTAIL (CONT) 1800-2736 Stainless steel 3 THE RIPPER SHORT ROAD RAGE 2-INTO-1 EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage Softail exhaust systems • Stepped 1 3/ 4” to 1 7/ 8” headpipes • Fully welded one-piece design • Utilizes an advanced inner collector for maximum performance • Baffle measures 10” L x 2.25” OD • Chrome or black finish systems feature mild steel construction and full heat shields; stainless steel system has partial heat shields PART # DESCRIPTION EMIS* 1800-2733 For 86-17 Softail 3 • Hand MIG welding • 18 mm O2 bungs with 12 mm adapters • Made in the U.S.A. 1800-2736 1800-2735 1800-2734 THE DRAG SPECIALTIES JULY 2025 DRAGSPECIALTIES.COM JULY 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
S&S CYCLE Boost performance and lose weight with the new Swindler 2-into-1 exhaust kit from S&S. This clever design uses the stock header pipes on your M-Eight Touring model and a crossover pipe plug kit to convert the system into a 2-into-1 design with your choice of Grand National or GNX muffler. PART # DESCRIPTION EMIS* CHROME 1801-1848 4” Grand National muffler 4 1801-1850 4.5” GNX muffler 4 PART # DESCRIPTION EMIS* GUARDIAN BLACK 1801-1847 4” Grand National muffler 4 1801-1849 4.5” GNX muffler 4 SWINDLER 2-INTO-1 EXHAUST CONVERSION KITS • Easy, economical way to upgrade your existing exhaust system into a 2-into-1 system • Kit uses the stock headers • Removes the left-side muffler and crossover pipe and routes the exhaust through a single right-side muffler • Included stainless steel crossover plug and clamp makes for a clean, simple installation • Your choice of 4” Grand National or 4.5” GNX muffler with a chrome or Guardian black finish • Grand National muffler end cap • Removable dB reducer is J2825 compliant • Made in the U.S.A. NOTE: Qualified Manufacturer Declared 50-State emissions compliant part on all 2017-2025 year FL Touring models. 1801-1847 1801-1850 FOR 17-25 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK PART # DESCRIPTION 1701-0806 Assault Series Rear Radial Caliper Mount for PART #1301-0159 ASSAULT SERIES REAR RADIAL CALIPER MOUNT • Allows for installation of a radial caliper to the rear of a performance bagger • Does not fit the stock swingarm; designed specifically for use with the Trask Assault swingarm PART #1301-0159 (sold separately) • Machined out of 6061 aluminum • Raw machined finish • Made in the U.S.A. PART # DESCRIPTION 1 1/2” FOR 3.375” 00-22 OEM-STYLE GAUGES 2210-0561 Chrome PART # DESCRIPTION 1 1/2” FOR 2.375/2.4” MINI GAUGES 2210-0565 Gloss black T-BAR SINGLE GAUGE MOUNTS • Billet aluminum construction • Two-piece clamp-on design • Fit most 1 1/ 2” T-Bars with 3 1/ 2” on-center pullback risers • Made in the U.S.A. NOTE: Not for use with XL883C/1200C OEM gauge. NOTE: Gauge mounts without cups; may require the use of an OEM gasket. 2210-0565 2210-0561 2 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* FOR 17-24 FLHT/FLHTK/FLHX/FLTRX/FLTRU/FLTRK/FLHR 1801-1844 Chrome 4 PART # DESCRIPTION EMIS* FOR 17-24 FLHT/FLHTK/FLHX/FLTRX/FLTRU/FLTRK/FLHR (CONT) 1801-1843 Black 4 RAZORBACK 450 SLIP-ON MUFFLERS • Massive 4.5” muffler bodies • Black contrast slash cut end caps • End caps can be rotated up or down • Sold in pairs • Made in the U.S.A. 1801-1843 1801-1844 PART # DESCRIPTION EMIS* FOR 25 SCOUT AND SCOUT BOBBER 1811-4811 Chrome 4 PART # DESCRIPTION EMIS* FOR 25 SCOUT AND SCOUT BOBBER (CONT) 1811-4810 Black 4 HI-OUTPUT SLIP-ON MUFFLERS • Bold stepped design • CNC-machined billet end cap • Laser-engraved logo badge • Made in the U.S.A. 1811-4810 1811-4811 3 DRAGSPECIALTIES.COM JULY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0802-1644 Smooth, solar-reflective leather 0802-16401 Smooth, vinyl 0802-16411 Double diamond, black thread PART # DESCRIPTION 0802-16421 Double diamond, silver thread 0802-16431 Double diamond, red thread 1 Not solar-reflective leather. PERFORMANCE PREDATOR 2-UP SEATS • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 6 1/ 2” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint FOR 00-05 FXST/FXSTS, 00-06 FLSTF, 00-17 FLST/FLSTC/FLSTN; 29” L OVERALL (12” W FRONT X 9” W REAR) • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. NOTE: Luggage rack must be removed for FLSTN models. 0802-1640 0802-1644 0802-1641 0802-1643 0802-1642 PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-2007 W/ blue LS 0801-2009 W/ orange LS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE (CONT) 0801-2010 W/ red LS 0801-2012 W/ white LS PRO SERIES SDC PERFORMANCE GRIPPER SEATS • True performance-oriented comfort seat with contoured lines, bucketed driver’s seating area and substantial lumbar support • Crafted with Saddlemen’s® carbon-fiber at the front, black gripper on the lumbar support and SaddleHyde™ sides • LS seats infuse old-school lattice stitch retro styling with a modern twist • Add a pop of color or match your accessories with available accented stitch colours • Features GelCore™ technology that reduces engine vibration by up to 50% and road impacts by up to 92% for a noticeably comfortable ride • Driver portion dimensions: 14” L x 12” W • Lumbar section dimension: 6” H • Passenger portion dimensions: 13” L x 6.5” W • Driver’s backrest included • Made in the U.S.A. 0801-2007 0801-2009 0801-2010 0801-2012 4 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-2015 Black w/ black stitching 0801-2021 Black w/ dark cherry stitching WIDE TRIPPER SOLO SEATS • Cut low with a 12” wide driver bucket so you can ride low, look cool, and still be comfortable at the end of a day’s ride • Sits the rider slightly lower but at a similar reach to the controls compared to stock • Detailed stitching in the highly durable synthetic glove-leather cover makes the Wide Tripper™ a real show winner • Controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • High-quality expanded vinyl cover that offers the appearance of leather and durability to withstand the elements • Made in the U.S.A. 0801-2021 0801-2015 PART # DESCRIPTION 3902-0295 For 20-25 FLHTCUTG/FLRT PART # DESCRIPTION 3902-0294 For 11-19 FLHTCUTG, 15-19 FLRT TRAILER HITCHES FOR TRI-GLIDE • Super-strong receiver-type hitch • Fabricated from laser-cut steel; hand-welded, then black powdercoated • Bolts directly to the frame in minutes • The tongue is 1 7/ 8” wide; the receiver is 1 1/ 4” • Receiver is almost completely hidden; the tongue installs easily using a hitch pin and clip • Made for use with or without Harley-Davidson optional rear bumper • Tongue height is 11”, which accommodates most trailers • Includes hitch, tongue and all necessary hardware • Plug-in wiring harness available separately • Made in the U.S.A. NOTE: Trailer ball sold separately 3902-0295 3902-0294 TAILWHIP UP FRONT SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover • Up Front design moves you 2” closer to the handlebars • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. 0801-2031 0801-2030 PART # DESCRIPTION 0801-2030 Pleated seat PART # DESCRIPTION 0801-2031 Double diamond seat FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (6.75” BACK SUPPORT, 11.75” W SEATING AREA) 5 DRAGSPECIALTIES.COM JULY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 3501-2170 For Softail, Dyna, FXR, XL and Custom models ESCAPE BASE SADDLEBAGS • Saddlebags with a clean, minimalist look and durable materials • Easy-on, easy off installation • One-piece “L” shaped backing for increased load capacity • 1680D ballistic nylon • TPU material with black on black Thrashin® print • Hi-viz orange interior • MOLLE attachment points on lid • Maximum fender width of 12” • Bag mounting brackets included (mount location between strut and fender) • Dimensions: 13” L x 9” H x 6” D • 18 L total volume PART # DESCRIPTION FOR SOFTAIL, DYNA, FXR, XL AND CUSTOM MODELS 3501-2168 Mini PART # DESCRIPTION FOR SOFTAIL, DYNA, FXR, XL AND CUSTOM MODELS (CONT) 3501-2169 Base ESSENTIAL MINI AND BASE SADDLEBAGS • Stripped down saddlebag design for a clean, minimalist look • Easy-on, easy-off installation • Reliable construction paired with durable materials • 1680D ballistic nylon • TPU material with black on black Thrashin® print • Hi-viz orange interior • MOLLE attachment points on lid • Fits on a wide variety of motorcycles • Bag mounting brackets included (mount location between strut and fender) • Maximum fender width of 12” • Mini dimensions: 8.5” L x 7.5” H x 5” D • Mini volume: 8 L • Base dimensions: 11” L x 8” H x 5” D • Base volume: 10 L 3501-2168 3501-2169 RIGID MOUNT KIT 6 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION ICE KOLOR FLARE™ 2312-1249 Blue ice 2312-1248 Green ice 2312-1246 Orange ice 2312-1245 Pink ice 2312-1247 Yellow ice KOLOR FLARE™ 2312-1254 Blue PART # DESCRIPTION KOLOR FLARE™ (CONT) 2312-1256 Bronze 2312-1253 Green 2312-1251 Orange 2312-1255 Purple 2312-1250 Red 2312-1252 Yellow 10” KOLOR FLARE™ WINDSHIELDS • The patented Flare™ design includes “hips” at the edges that redirect air to add downforce, improving stability compared to a stock windshield • The “flip” at the top pushes air up and back, providing cleaner, less turbulent airflow for both the rider and passenger • Kolor Flare™ windshields are crafted from acrylic • Ice Kolor Flares feature a fluorescent edge for extra flair on your bike • Installs easily with stock hardware and retains stock windshield height adjustability • Check local laws concerning the use of colored windshields in your area 2312-1249 2312-1246 2312-1248 2312-1250 2312-1251 2312-1252 2312-1253 2312-1255 2312-1256 • See the 2025 Drag Specialties/Parts Canada Indian catalogue for the complete line of Klock Werks Kolor Flare Windshields NOTE: Klock Werks typically recommends selecting a Flare™ size that allows you to comfortably see over the windshield while seated in your natural riding position. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D6331018S. And also under International Patents: 324093, 324094, 325192. 2312-1245 2312-1247 2312-1254 FOR 20-24 CHALLENGER, 22-24 PURSUIT 7 DRAGSPECIALTIES.COM JULY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24 FLHX, 23-24 FLHXSE 2310-0878 8” red PART # DESCRIPTION FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 2310-0866 10” red KOLOR FLARE™ WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0866 2310-0878 PART # DESCRIPTION FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 2310-0865 10” blue 2310-0864 10” green 2310-0862 10” orange 2310-0861 10” pink 2310-0863 10” yellow PART # DESCRIPTION FOR 24 FLHX, 23-24 FLHXSE 2310-0877 8” blue 2310-0876 8” green 2310-0874 8” orange 2310-0873 8” pink 2310-0875 8” yellow ICE KOLOR FLARE™ WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0864 2310-0861 2310-0877 2310-0875 2310-0874 8 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
MAGNUM SHIELDING Magnum Shielding handlebars are manufactured using the highest standards of quality. Every handlebar has machined (not swaged) control mounts, burr-free internal wiring holes, electronic throttle slots and are CNC mandrel bend for precision. Pre-loaded E-Z pull through plastic woven sleeving makes installation easy. Swap out for a set and add comfort and style to your ride. CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLHTK, 96-23 FLHT/FLHX (EXCEPT 23 FLHXSE) AND 09-24 FLHTCUTG/FLHXXX 0601-6776 0601-6772 10” 36” 12” 10 1/2” 0601-6777 0601-6773 12” 36” 12” 10 1/2” 0601-6778 0601-6774 14” 36” 12” 10 1/2” 1 1/ 4” CRUSADER HANDLEBARS • Stainless steel handlebars available in 10”, 12” and 14” high Bagger style with wrist angles engineered for riding comfort • Manufactured with the highest quality construction, including machined control mounts (not swaged), CNC mandrel bends, and burr-free internal wiring holes and electronic throttle control slots • Magnum’s patented internal design guarantees easy installation by creating additional room to allow complete wiring harnesses with factory vinyl covering and sleeved terminal connections to easily pass through without binding or chaffing • Pre-loaded E-Z pull-thru plastic woven sleeving makes wiring installation even easier • Handlebars are 11/ 4” diameter with a 1” diameter center and 31/ 2” on center knurling • Work with standard controls, including hydraulic clutch • Bagger style bars are designed for the correct clearance on Batwing models • U.S. Patent # 10,882,578. 0601-6776 0601-6772 CHROME PART # BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLHXSE, 24 FLHX (1” DIA. CLAMPING AREA) 0601-6874 0601-6873 4” 31 1/2” 6” 4” FOR 23-24 FLTRXSE, 24 FLTRX (11/4” DIA. CLAMPING AREA) 0601-6878 0601-6877 4” 31 1/2” 6” 4” FOR 21-23 FLHT/FLHTC/FLHTCU/FLHTK/FLHX/FLHXST AND H-D FL TRIKE (EXCEPT 23 FLHXSE) (1” DIA. CLAMPING AREA) 0601-6872 0601-6871 4” 31 1/2” 6” 4” FOR 21-23 FLTRX, FLTRXS/ST (EXCEPT 23 FLTRXSE) (11/4” DIA. CLAMPING AREA) 0601-6876 0601-6875 4” 31 1/2” 6” 4” 1” TRACKBARS • Drilled and slotted for internal wiring • Made of aluminum • Laser-etched Kodlin Motorcycles® logo • Perfect addition to Kodlin Fastback and Ascent risers (sold separately) NOTE: 21-24 FLHT/FLHX/FLHTCUTG models will require modifications to install these bars. 0601-6872 0601-6875 9 DRAGSPECIALTIES.COM JULY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLHXSE, 24 FLHX (1” DIA. CLAMPING AREA) 0601-6830 0601-6833 12” 36” 15 1/2” 9” 0601-6831 0601-6836 14” 36” 15 1/2” 9” 0601-6832 0601-6837 16” 36” 15 1/2” 9” EZ INSTALL 1 1/ 4” ROUND TOP HANDLEBAR KITS • EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and install them on your motorcycle • Handlebars now come wired for your handlebar controls • Our top corner feature is a non-welded corner we machine from billet steel with a smooth internal wire cavity that won’t damage the internal wiring • CNC mandrel-bent from 11/ 4” diameter x 0.120” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship • Available in chrome or gloss black powdercoated finishes • Gloss black bars come with black brake line extensions/cable extensions • Chrome bars come with braided stainless brake line extensions/cable extensions • Made in the U.S.A. NOTE: Our handlebar kits do not replace existing lines and cables. We extended them. NOTE: Accepts OEM heated grips. NOTE: U.S. Patent No. 10,946,926. 0601-6843 0601-6838 PART # DESCRIPTION 1621-1192 For 18-24 Softail w/ driver footpegs DRIFTER MINI FLOORBOARDS • Give your bike that distinct performance bagger look without sacrificing the comfort • Short and slim profile (12” L x 9” W) • Enhanced ground clearance over stock • Mounts to factory footpeg brackets • Machined from billet aluminum • Black Ops™ finish features a gloss black finish over a contrasting texture black finish for outstanding durability and looks 10 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DESCRIPTION BLUE GOLD RED FRONT RIMS 19” x 3.25” 0210-0439 0210-0440 0210-0441 21” x 3.50” 0210-0442 0210-0443 0210-0444 FRONT/REAR RIMS 18” x 5.50” 0210-0436 0210-0437 0210-0438 SPLIT-SPOKE RIMS • All rims are CNC machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Rims can be used on both front and/or rear applications when correct hub kit is installed • Rims accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings NOTE: Arlen Ness hub kits must be purchased separately to install; see the 2025 Drag Specialties FatBook. 0210-0436 0210-0440 0210-0441 1 Not for V-Rod models with 240 mm rear tire. PART # DESCRIPTION REPL. OEM # SIZE FRONT APPLICATIONS 0215-1439 For 08-24 FLHT/ FLHX/ FLHR/ FLTR/ FLTRX/ FLTRU/ FLTRK (w/ ABS) 9276A/B/ 9252A 25 mm ID 0215-1418 For 08-19 FLHT/FLHX/FLHR/FLTR (w/o ABS) 9276 25 mm ID 0215-1440 For 00-07 FLT/FLHT/FLHR/FLHX/FLTR 9247 1” ID 0215-1439 For 18-24 Softail, 11-17 FXS/FLS/FLST/FXCW (w/ ABS) 9276A/B/9252A 25 mm ID 0215-1418 For 07-24 Softail (except FLSTSB) (w/o ABS) 9276 25 mm ID 0215-1441 For 00-06 FXST/ FLST, 00-07 FLSTS/C 9267 3/4” ID 0215-1439 For 12-17 FXD/FXDWG/FLD (w/ ABS) 9276A/B/9252A 25 mm ID 0215-1418 For 08-17 FXD/FXDWG (w/o ABS) 9276 25 mm ID 0215-1440 For 04-07 FXD/FXDL, 06-07 FXDWG 9247 1” ID 0215-1441 For 00-03 FXD, 00-05 FXDWG 9267 3/4” ID 0215-1439 For 15-22 XL, 21-24 RH1250S, RA1250/1250S, RH975/975S (w/ ABS) 9276A/B/9252A 25 mm ID 0215-1418 For 08-22 XL (w/o ABS) 9276 25 mm ID 0215-1441 For 00-07 XL 9267 3/4” ID 0215-1439 For 08-17 V-Rod (w/ ABS) 9276A/B/9252A 25 mm ID 0215-1418 For 08-17 V-Rod (w/o ABS) 9276 25 mm ID 0215-14401 For 02-07 V-Rod 9247 1” ID REAR APPLICATIONS 0215-1419 For 09-19 FLHT/FLHX/FLHR/FLTR (w/o ABS); (4 pc.) 9276 25 mm ID 0215-1418 For 08 FLHT/FLHX/FLHR/FLTR (w/o ABS); (pr.) 9276 25 mm ID WHEEL BEARING KITS • Bearings are packed with heavy duty premium marine grease and with the addition of special complex thickeners which allows it to be virtually waterproof • Nitrile Butadiene Rubber Double-lip oil seals help prevent abrasives, corrosive moisture and other harmful contaminants from entering bearings • To further help keep any moisture out, we have gone from 30% grease filling to 60% for harsh conditions • The Special V-groove on the inner race is better for resistance to water intrusion • Provides unsurpassed rust and corrosion protection • Available in individual kits for front or rear wheels 0215-1418 11 DRAGSPECIALTIES.COM JULY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
WHEEL BEARING KITS (CONT) PART # DESCRIPTION EMIS* 1020-4279 For 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 3 POWER COMMANDER 6 PTI • Uses the same great features as the Power Commander V, but is perfect for turbocharged or supercharged applications looking for precision, control and reliability • Modify your fuel curve based off a pressure (boost) table and/or temperature table • Pressure table provides 3D mapping capability based on boost vs. rpm • Temperature table provides 2D mapping capability with up to 50 points of adjustments • Comes with a Bosch 3 bar map/temp sensor • Made in the U.S.A. PART # DESCRIPTION EMIS* 1022-0301 For 17-24 Touring and 18-24 Softail 3 ELECTRONIC FUEL INJECTOR • Quality OEM upgrade • Injector provides 73% more fuel than the OEM injector and 25% more than Feuling® 6.1 grams per second injector • Delivers fuel at 7.6 grams per second through multiple spray holes • Recommended for performance engine combinations making over 110 rear wheel hp and supports 185+ hp • Has EV-6 USCAR type connector • For RACE USE ONLY • Sold each PART # DESCRIPTION EMIS* 1010-3282 For 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2 JET AIR CLEANER • Low-profile and lightweight air cleaners CNC-machined from billet aluminum • Innovative and versatile design allows unit to be mounted in the vertical or horizontal position • Compact design for improved knee clearance • Features PM’s proven internal crankcase venting system • Feature a high-flow reusable air filter • Comes in chrome finish • Made in the U.S.A. PART # DESCRIPTION REPL. OEM # SIZE REAR APPLICATIONS (CONT) 0215-1440 For 02-07 FLT/FLHT/FLHR/FLHX/FLTR 9247 1” ID 0215-1418 For 08-24 Softail, 08-17 FXD/FXDWG (w/o ABS) 9276 25 mm ID 0215-1440 For 06-07 FXD/FXDWG 9247 1” ID 0215-1418 For 08-22 XL (w/o ABS) 9276 25 mm ID 0215-1440 For 05-07 XL 9247 1” ID 0215-1418 For 08-17 V-Rod (w/o ABS) 9276 25 mm ID 0215-14401 For 02-07 VRSC 9247 1” ID 1 Not for V-Rod models with 240 mm rear tire. 12 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 23-25 FLHXSE, 24-25 FLHX, 25 FLHXU 2040-3431 Chrome PART # DESCRIPTION FOR 23-25 FLHXSE, 24-25 FLHX, 25 FLHXU (CONT) 2040-3432 Black QUILL™ LED FAIRING LIGHTS • Custom-engineered for H-D batwing fairing models • Dual-function LEDs with bright white running lights and built-in amber turn signals • ABS construction; available in chrome or gloss black • High-strength polycarbonate lenses • GHOST™ Lens Technology • Preinstalled VHB adhesive for secure mounting • Plug-and-play installation with either the Ciro® Plug-N-Play Standard Harness or the Lightstrike COMMANDER™ (sold separately) • Choice of different modes and animations when paired with the Lightstrike COMMANDER PART # DESCRIPTION FOR 23-24 FLHXSE, 24 FLHX 2040-3410 Chrome 2040-3411 Black GOAT-E™ LIGHT • Sits just below headlight and designed to work with the OEM batwing fairing • Bold, goatee-inspired look • Bright white LED running light and amber turn signals • Available in chrome or black • Plug-and-play installation 2040-3410 2040-3411 2040-3431 2040-3432 13 DRAGSPECIALTIES.COM JULY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 2050-0556 For 07-13 FLHR/FLHT/FLHX/FLTR, 09-13 H-D Trike and 07-13 XL (repl. OEM #s TSM 68920-07, HFSM (US/HDI) 68924-07) 2050-0553 For 00-06 FLHR/FLHT/FLHX/FLTR (except 00-01 FLHR/FLHT/FLHX/FLTR w/ Magneti Marelli EFI), 01-03 Dyna, 04-06 XL (repl. OEM #s TSM 68920-01, TSSM 68924-00, and TSSM 68924-00) 2050-0555 For 07-10 Softail, 07-11 Dyna, and 07-17 V-Rod (repl. OEM #s TSM 68921-07, HFSM (US/HDI) 68925-07 and HFSM 69976-08) 2050-0554 For 01-06 Softail, 04-06 Dyna (repl. OEM #s TSM 68921-07, TSSM 68923-00 and TSSM HDI 68925-00) TURN SIGNAL MODULES • Direct OEM Turn Signal Module (TSM), Turn Signal Security Module (TSSM) and Hands-Free Security Module (HFSM) plug-and-play replacement on H-D models • Functions as TSM only; no security functions • Compatible with LED or incandescent bulbs; 0.24A to 6A maximum turn signal load per side • Eliminates the need for a load equalizer or signal stabilizer when converting to BCM compliant LED turn signals • Follows OEM TSM manual password learning procedure and compatible with TechnoResearch module replacement procedure • Offers both manual and self-cancelling turn signal cancellation functions based on speed, timing, and direction of the motorcycle • Full operation of four-way hazards along with upgraded, smart cancellation based on time, ignition position, and battery voltage • Provides automatic shut off parameters when vehicle tilt exceeds 45° right or left for 1 second or more • Low current consumption with built-in short circuit and over circuit protection • Robust, high-quality components • Wide operating voltage: 11VDC to 15VDC • PART #s 2050-0555 and 2050-0556 have integration with the OEM safety switches to prevent starting in gear without the clutch pulled 2050-0553 PART # DESCRIPTION 2050-0549 For 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE DYNAMIC LOAD ISOLATOR • Isolates the Body Control Module (BCM) allowing for the use of almost any aftermarket lighting product or electrical accessory • Plug-and-play isolation provides isolated power, accessory and ground output banks • Electronically isolates all outputs from the vehicle • No relays or other mechanical devices that are subject to mechanical failure • All outputs are 100% isolated from inputs to help protect factory warranty, prevent BCM codes and avoid damage to the vehicle from non-compliant aftermarket accessories • Dimensions: 2.5” x 2.5” x 0.75” • 30A total output capacity • 5A per output, 10A per accessory output • 4-way hazard compatible PART # FITS MODEL 2120-1417 For 14-24 FLHR/FLHRXS, 14-25 FLHP and 19-25 FLRT FRONT ABS EXTENSION HARNESS • Safe and easy method when lengthening your front end and keeping ABS properly connected • 12” extension • Plug-and-play installation • Made in the U.S.A. 14 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=