PART # DESCRIPTION 2050-0556 For 07-13 FLHR/FLHT/FLHX/FLTR, 09-13 H-D Trike and 07-13 XL (repl. OEM #s TSM 68920-07, HFSM (US/HDI) 68924-07) 2050-0553 For 00-06 FLHR/FLHT/FLHX/FLTR (except 00-01 FLHR/FLHT/FLHX/FLTR w/ Magneti Marelli EFI), 01-03 Dyna, 04-06 XL (repl. OEM #s TSM 68920-01, TSSM 68924-00, and TSSM 68924-00) 2050-0555 For 07-10 Softail, 07-11 Dyna, and 07-17 V-Rod (repl. OEM #s TSM 68921-07, HFSM (US/HDI) 68925-07 and HFSM 69976-08) 2050-0554 For 01-06 Softail, 04-06 Dyna (repl. OEM #s TSM 68921-07, TSSM 68923-00 and TSSM HDI 68925-00) TURN SIGNAL MODULES • Direct OEM Turn Signal Module (TSM), Turn Signal Security Module (TSSM) and Hands-Free Security Module (HFSM) plug-and-play replacement on H-D models • Functions as TSM only; no security functions • Compatible with LED or incandescent bulbs; 0.24A to 6A maximum turn signal load per side • Eliminates the need for a load equalizer or signal stabilizer when converting to BCM compliant LED turn signals • Follows OEM TSM manual password learning procedure and compatible with TechnoResearch module replacement procedure • Offers both manual and self-cancelling turn signal cancellation functions based on speed, timing, and direction of the motorcycle • Full operation of four-way hazards along with upgraded, smart cancellation based on time, ignition position, and battery voltage • Provides automatic shut off parameters when vehicle tilt exceeds 45° right or left for 1 second or more • Low current consumption with built-in short circuit and over circuit protection • Robust, high-quality components • Wide operating voltage: 11VDC to 15VDC • PART #s 2050-0555 and 2050-0556 have integration with the OEM safety switches to prevent starting in gear without the clutch pulled 2050-0553 PART # DESCRIPTION 2050-0549 For 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE DYNAMIC LOAD ISOLATOR • Isolates the Body Control Module (BCM) allowing for the use of almost any aftermarket lighting product or electrical accessory • Plug-and-play isolation provides isolated power, accessory and ground output banks • Electronically isolates all outputs from the vehicle • No relays or other mechanical devices that are subject to mechanical failure • All outputs are 100% isolated from inputs to help protect factory warranty, prevent BCM codes and avoid damage to the vehicle from non-compliant aftermarket accessories • Dimensions: 2.5” x 2.5” x 0.75” • 30A total output capacity • 5A per output, 10A per accessory output • 4-way hazard compatible PART # FITS MODEL 2120-1417 For 14-24 FLHR/FLHRXS, 14-25 FLHP and 19-25 FLRT FRONT ABS EXTENSION HARNESS • Safe and easy method when lengthening your front end and keeping ABS properly connected • 12” extension • Plug-and-play installation • Made in the U.S.A. 14 JULY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=