PART # DESCRIPTION FOR 20-24 FXST, 18-25 FXBB/FXBBS, 18-21 FLSL 1401-1092 9” frenched PART # DESCRIPTION FOR 20-24 FXST, 18-25 FXBB/FXBBS, 18-21 FLSL (CONT) 1401-1090 9” smooth BENCHMARK VICLA REAR FENDERS • Stamped from 14ga U.S. steel, these fenders are E-coated to prevent rust and corrosion with the lowest paint prep in the industry • The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work • Lack of rivets and smooth lines accent the bike’s classic style • Fenders are 7.125” wide, and the 9” extended tail sections over stock will make the bike look lower and more flowing • All stock mounting points stay intact and are used PART # DESCRIPTION FOR 97-08 FLT/FLHT/FLHR/FLTR 1401-1085 Frenched style PART # DESCRIPTION FOR 97-08 FLT/FLHT/FLHR/FLTR (CONT) 1401-1086 Smooth style PB (PERFORMANCE BAGGER) BENCHMARK REAR FENDERS • Stamped from 14ga U.S. steel, these 7.125” fenders are E-coated to prevent rust and corrosion • Deep-draw stamping technology ensures a consistent flawless finish while minimizing body work • License plate frames for frenched style sold separately, see the 2025 Drag Specialties FatBook • Made in the U.S.A. 1401-1085 1401-1086 • Available in smooth and also in frenched, which includes a license plate pocket • License plate frames for frenched style sold separately, see the 2025 Drag Specialties FatBook • Made in the U.S.A. 1401-1092 1401-1090 THE DRAG SPECIALTIES AUGUST 2025 DRAGSPECIALTIES.COM AUGUST 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* FOR 25 FXBB/FXLRS/FXLRST/FLHC 1801-1846 Chrome 4 PART # DESCRIPTION EMIS* FOR 25 FXBB/FXLRS/FXLRST/FLHC (CONT) 1801-1845 Guardian Black 4 GRAND NATIONAL SLIP-ON MUFFLER • Race-inspired design with a 4” OD muffler body • Removable dB reducer for back pressure and sound tuning • Meet J2825 levels for sound • Grand National end cap • All hardware included • Deep-performance rumble replaces stock whisper tone • Made in the U.S.A. NOTE: Qualified Manufacturer Declared replacement part for 2025 models listed (50-state). PART # DESCRIPTION 1861-1826 Swindler 2-into-1 exhaust crossover plug CROSSOVER PLUG FOR SWINDLER 2-INTO-1 EXHAUST CONVERSION KIT • Stainless steel crossover plug and clamp • Designed for use with the S&S 2-into-1 Swindler exhaust conversion kit PART #s 1801-1847, 1801-1848, 1801-1849 and 1801-1850 (sold separately) • Sold each • Made in the U.S.A. 1801-1845 2 AUGUST 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
VANCE & HINES More than just exhaust! The VO2 air intakes have an open-face design to allow more airflow to help your engine breathe and make more power. The cover is CNC machined billet aluminum for strength and style. Pull in more air and put out more power with a VO2 air intake. PART # DESCRIPTION EMIS* FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 1010-3356 Black 2 1010-3357 Contrast 2 FOR 24 FLHTK/FLTRK/FLHRXS, 17-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 17-24 H-D FL TRIKE, 18-24 SOFTAIL 1010-3353 Black 2 1010-3354 Contrast 2 FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS 1010-3351 Black 2 1010-3352 Contrast 2 PART # DESCRIPTION EMIS* FOR 01-17 TWIN CAM DELPHI EFI AND 99-06 TWIN CAM CV CARB (EXCEPT 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS) 1010-3349 Black 2 1010-3350 Contrast 2 FOR 91-22 XL (EXCEPT RH SPORTSTER) 1010-3347 Black 2 1010-3348 Contrast 2 VO2 ONYX AIR INTAKE • Open face design allows for maximum airflow • CNC billet aluminum cover • Enhanced airflow for performance 1010-3356 1010-3354 PART # # OF TEETH REPL. OEM # DESCRIPTION 11/8” W 1204-0259 139 40024-04 For 04-06 FLHT/FLTR/FLHR 1204-0258 135 40307-00 For 00-05 FXST, 00-06 FLST 1204-0256 130 40048-07 For 07-17 FXD/FXDWG (Japan) 1204-0257 133 40015-00 For 00-06 FXD/FXDWG (domestic) 1204-0255 128 40022-91 For 91-03 XL, 94-02 Buell (except Blast) (domestic/international) 11/2” W 1204-0264 139 40024-97 For 97-03 FLT/FLHT/FLHR/FLTR (domestic) 1204-0263 136 40001-85 For 85-96 FLT/FLHT, 85-94 FXR (domestic) 1204-0262 133 40015-90 For 94-95 FLT (Swiss) 1204-0260 130 40017-94 For 83-93 FLT/FXR (international) 1204-0261 132 40023-86 For 83-93 FLT/FXR (domestic) 1204-0260 130 40017-94 For 95-99 FLST/FXST (domestic) 1204-0261 132 40023-86 For 86-92/94 FLST/FXST (domestic) 1204-0262 133 40015-90 For 91-98 FXD/FXDWG (domestic) HIGH-STRENGTH FINAL DRIVE BELTS • Made of super-strong Gates Carbon X7N material • Belts have 14 mm pitch, available in 11/ 2” and 1 1/ 8” widths • Made in the U.S.A. 3 DRAGSPECIALTIES.COM AUGUST 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0940-2220 Chrome, finned 0940-2219 Chrome, smooth PART # DESCRIPTION 0940-2218 Black, smooth 0940-2221 Black, twice cut CAM TIMING COVERS • Aircraft-grade 6061 aluminum construction • Slim design and cut away corner for improved floorboard clearance • Hardware included • Made in the U.S.A. FOR 24-25 FLHX/FLTRX, 23-25 FLHXSE/FLTRXSE, 25 FLFB/FLHC/FXBB/FXBR/FXLRS/FXLRST 0940-2219 0940-2221 PART # DESCRIPTION EMIS* 0925-1619 For 17-25 M-Eight 3 RACE SERIES® 487 CHAIN DRIVE CAMSHAFT KIT • Includes camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardware • Kit also includes gasket/O-ring kit that allows installation of Feuling® Heavy-Duty HP+® 0.0165” wall one-piece pushrods or factory one-piece pushrods • Includes Race Series® lifters • Reaper® 487 cam is a great all-around camshaft and Feuling’s go to for 41/ 2 stroke 114” and 117” looking for an aggressive bolt-in • Cam specs measured in the engine on the lifter @ 0.050” using a 1.61 rocker arm ratio • Intake: 0.478 valve lift, 20.5° open, 37° close, 237° duration @ 50, 0.180” lift @ TDC, 98.5° lobe centerline • Exhaust: 0.487 Valve Lift, 44° open, 17.5° close, 241.5° duration @ 50, 0.146” lift @ TDC, 103.25° lobe centerline • Made in the U.S.A. NOTE: Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling® highly recommends running one-piece pushrods (see PART #0928-0091) over quick-install adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues. NOTE: Feuling fastener kit PART #2401-0994 also highly recommended to help prevent cylinder head cracking; kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress of the rocker shaft standoffs. NOTE: Not for 2023-2025 models with 121” VVT motors. 4 AUGUST 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RACE SERIES® 487 CAMCHEST KITS • Feuling® complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under one part • These combination kits not only ensure each individual part is designed to work and function together, but to do so in total harmony • These camchest kits take the guesswork out of the ordering process and provides the engine builder maximum reliability, peak performance and the coolest engine/oil temperatures obtainable • Complete Camchest kits include: Feuling High Volume Oil pump, High Flow Camplate, Reaper® series camshafts, Race Series® full-travel or short- travel hydraulic roller lifters, fixed-length pushrods, Timken®/Koyo® cam bearings, rocker arm studs/nuts, gaskets, O-rings, ARP® cam/crank fasteners, washers, moly paste and Loctite® • Race Series kits include a Race Series oiling system (billet 7075 oil pump, Race Series lifters, High Flow billet 7075 aluminum camplate) • Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature, deeper scavenge kidneys over Fueling HP+® oil pump • Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume • Race Series full-travel hydraulic lifters have a full 0.200” of total travel designed with a slower bleed-down rate to handle heavy valve spring pressures, increase engine rpm before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M-Eight front exhaust camshaft lobe flange • Race Series short-travel hydraulic lifters have 0.115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine • The travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes • 30% more pressure gear volume over stock for M-Eight water-cooled motors • 53% more scavenge gear volume over stock for M-Eight water-cooled motors • 27% more pressure and scavenge gear volume over stock for M-Eight OilCooled motors • 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight water-cooled motors and M-Eight Oil-Cooled motors • 46% more oil volume to the crankshaft and connecting rod bearing for M-Eight water-cooled motors and M-Eight Oil-Cooled motors • 15 to 25 degree cooler engine temperatures for M-Eight water-cooled motors and M-Eight Oil-Cooled motors • 15 to 30 degree cooler oil temperatures for M-Eight water-cooled motors and M-Eight Oil-Cooled motors • 10 to 30 more psi of oil pressure for M-Eight water-cooled motors and M-Eight Oil-Cooled motors • Increase oil pressure, scavenge volume and engine oil flow • Quieter and smoother engine operation • Reduces wet sumping, blowby and oily air cleaners • Magnets in oil pump to help protect gears and pressure relief valve • Test results show 2 hp gain and 2 ft/lbs. of torque gain to the rear wheel on M-Eight • Feuling test results show a 50% reduction of engine sump oil level • Feuling M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal • Reaper® 487 cam is a great all-around camshaft and Feuling’s go to for 41/ 2 stroke 114” and 117” looking for an aggressive bolt-in • Cam specs measured in the engine on the lifter @ 0.050” using a 1.61 rocker arm ratio • Intake: 0.478 valve lift, 20.5° open, 37° close, 237° duration @ 50, 0.180” lift @ TDC, 98.5° lobe centerline • Exhaust: 0.487 Valve Lift, 44° open, 17.5° close, 241.5° duration @ 50, 0.146” lift @ TDC, 103.25° lobe centerline • Made in the U.S.A. NOTE: Not for 2023-2025 models with 121” VVT motors. 5 DRAGSPECIALTIES.COM AUGUST 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* 0925-1620 For 17-25 M-Eight oil-cooled motors 3 0925-1622 For 17-25 M-Eight water-cooled motors 3 PART # DESCRIPTION EMIS* 0925-1621 For 17-25 M-Eight oil-cooled motors 3 0925-1623 For 17-25 M-Eight water-cooled motors 3 RACE SERIES® 487 CAMCHEST KITS (CONT) 0925-1620 0925-1623 KITS W/ FULL-TRAVEL HYDRAULIC LIFTERS KITS W/ SHORT-TRAVEL HYDRAULIC LIFTERS 6 AUGUST 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FORK SPRINGS/RATE STROKE LENGTH 0413-0186 For 23-24 FLHXSE/FLTRXSE, 24 FLTRXSTSE 12 N/m, 13 N/m, 14 N/m 4.528” 0413-0183 For 20-24 FXLRS, 20-23 FXFBS 9.5 N/m, 10 N/m, 11 N/m 5.118” 0413-0190 For 18-21 FLSB 9.5 N/m, 10 N/m, 11 N/m 5.118” NIX 30 FORK CARTRIDGE KITS • Öhlins NIX Technology • 30 mm internal piston diameter • External preload adjustment • External compression and rebound adjustment PART # DESCRIPTION FORK SPRINGS/RATE STROKE LENGTH 0413-0185 For 17-22 FLHXSE, 18-22 FLTRXSE, 22 FLTRK and 17-22 FLHTCUTG 12 N/m and 13 N/m 3.583” 0413-0159 For 14-16 FLHT/FLTR/FLHX 12 N/m and 13 N/m 4.567” 0413-0171 For 18-23 FLFB/FLFBS 9.5 N/m, 10 N/m and 13 N/m 5.118” 0413-0189 For 18-19/23 FXBR, 18-20 FXLR/FXBRS, 18-21 FLSL, 18-23 FXBB/FXBBS/FLHC/FLHCS, 20-23 FXLRS/FXLRST, 22 FXRST 9 N/m, 10 N/m and 11 N/m 5.118” 0413-01881 For 06-10 FXD/FXDL, 06-14 FXDC, 06-17 FXDB, 07 FXDSE, 10 FXDFSE2 10 N/m and 11 N/m 5.039” NIX 22 FORK CARTRIDGE KITS • Öhlins NIX technology separates compression and rebound damping circuits allowing adjustments to one circuit without affecting the other, unlike many other systems • External compression and rebound adjustment • External preload adjustment • Fork springs included (see chart for spring rates) • 1” lowering kit included • Pull up tool and stopper plate included • 22 mm piston diameter • Öhlins setting databank helps achieve the ride you want NOTE: Recommended rider weight: minimum 150 lbs., maximum 350 lbs. 0413-0185 0413-0186 0413-0171 • Come with fork springs (see chart for spring rates) NOTE: Recommended rider weight: minimum 150 lbs., maximum 350 lbs. 1 Not for use with FLD, FXDWG, FXDLS or FXDF. 7 DRAGSPECIALTIES.COM AUGUST 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 80-24 FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) 1310-2499 Ultra Low, standard 1310-2501 Ultra Low, heavy-duty 1310-2500 Ultra Touring, standard 944 FST ULTRA TOURING/LOW SHOCKS WITH QUICK PRELOAD SYSTEM • Unique Ultra touring spring configuration provides the superb ride quality and suspension travel of a 13” shock but the custom lowered look of a 12” shock • Ultra Low Series shocks are designed to sit even lower; 2” lower than a stock Touring model • With the QPS upgrade kit installed on 444 Series and 944 Series shocks, it’s no longer necessary to take saddlebags off to adjust the sag when going from a single rider, to a two up riding configuration, and then back to a solo riding experience • QPS upgrade kit utilizes a sealed gear drive to smoothly adjust preload and offers the same range of preload adjustment as the original 444 or 944 series shock when it comes from the factory • Built around Progressive Suspension’s Frequency Sensing Technology (FST) • Allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality • 944 FST Ultra Touring shocks are available in three configurations: Standard (Up to 250 lbs.), Heavy-duty (250 to 350 lbs.) and Super heavy-duty (350+ lbs.) • Unique spring combination delivers a lower rider height while being ridden or on a side stand, allowing you better control both at intersections and when parking • Adjust spring preload by hand; no special tool needed PART # DESCRIPTION 1701-0811 Left 1701-0810 Right RACE SERIES RADIAL MOUNT CALIPER WITH ARC TECHNOLOGY • CNC machined from billet aluminum • Increased rigidity for improved braking performance • Advanced Radiant Cooling (ARC) Technology for maximum cooling efficiency • Designed for use with 0.200” thick brake rotors • ABS and NON-ABS compatible • For use with radial caliper mounts with 108 mm mounting bolt spacing (sold separately) • Chrome mounting hardware included • Made in U.S.A. 1701-0811 • Progressive rate mainsprings specifically designed for touring models • High-pressure gas charged for consistent performance • Made in the U.S.A. NOTE: Super heavy-duty applications are recommended for bikes operating above the manufacturer’s maximum load rating over 50% of the time. NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues, such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact. 1310-2499 PART # DESCRIPTION FOR 80-24 FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) 1310-2502 Ultra Touring, heavy-duty 1310-2503 Ultra Touring, super heavy-duty 8 AUGUST 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CIRO Ciro offers a large selection of parts and accessories to customize your Indian motorcycle. The new Spar side lights are specifically styled for Indian Touring model trunks. The LEDs feature GHOST™ lens technology and add run/turn/brake light features to your bike for improved visibility and style. PART # DESCRIPTION FOR 18-24 ROADMASTER/PURSUIT, 18-24 TOURING MODELS W/ FACTORY TOURING TRUNK ACCESSORY OEM #2884046-XXX 2040-3396 Chrome w/ light smoke lens 2040-3398 Chrome w/ red lens 2040-3397 Black w/ light smoke lens 2040-3399 Black w/ red lens SPAR SIDE LIGHTS • Designed specifically for Indian Touring trunks • Distinctive curved stake shape • Red run, turn and brake functions • GHOST™ lens technology • Available in chrome or black finishes with light smoke or red polycarbonate lenses • Installs with pre-applied 3M VHB adhesive • Plug-and-play installation harness PART #2120-1244 and Ciro® Lighting Controller PART #2050-0499 sold separately 2040-3397 2040-3396 2040-3398 2040-3399 9 DRAGSPECIALTIES.COM AUGUST 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 2020-2333 For 15-23 FLTRX/FLTRXS, 22-23 FLTRXST/FLTRKSE, 20-24 FLTRK, 18-22 FLTRXSE, 16-19 FLTRU, 20-22 FLTRUSE and 23-25 FLTRT SHARK DEMON® LED FRONT TURN SIGNALS • High-performance LED front turn signals that replace OEM signals • Aggressive styled housing in a gloss black finish • Bright white running light shines through the smoked faceted lens • Full-contrast amber flashing turn signals • Plug-and-play • DOT compliant • Sold in pairs PART # DESCRIPTION 2040-3437 Red lens PART # DESCRIPTION 2040-3438 Smoke lens PROBEAM® TOUR-PAK® ADD-ON LED LIGHT KITS • Add eye-catching light pipe running light, with full contrast brake light and standard or sequential flashing turn signal to your H-D OEM King Tour-Pak® luggage • Assembly offers three pre-set turn signal flash modes that are controlled with included magnet; select from standard flash, sequential-on flash or sequentialoff flashTour-Pak power harness and Tour-Pak quick disconnect harness PART # DESCRIPTION 2040-3439 For 23-25 FLHXSE/FLTRXSE, 25 FLHXU, 24-25 FLHX/FLTRX/FLTRXSTSE LOW PROFILE LED SADDLEBAG LIGHTS WITH AMBER TURN SIGNALS • Adds rear visibility with a single row of dual color LEDs behind a smoked lens • LEDs illuminate low-intensity red running light, high-intensity red brake light and full-contrast amber turn signal • Turn signal flash can be controlled with included magnet; choose from standard flash, sequential-on flash or sequential-off flash pattern 2040-3437 2040-3438 • Low profile units securely adhere with double-sided tape to the rear facing side of OEM saddlebags just under the saddlebag lid • Includes wire harness for simple plug-and-play installation • In-line quick disconnects provide easy removal of saddlebags without having to access under the seat • Sold in pairs FOR 25 FLHXU, 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLTRX/FLTRXSTSE W/ ADD-ON OEM KING TOUR-PAK® LUGGAGE OEM #53000775 • Includes DOT compliant ProBEAM® LED Tour-Pak light assembly in choice of smoked or red lens, precise drilling template, Tour-Pak power harness and Tour-Pak quick disconnect harness 10 AUGUST 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLTRXSE, 24 FLTRX 0601-6528 Chrome 5.5” 31.75” 5.5” 3.25” 0601-6529 Brushed stainless steel 5.5” 31.75” 5.5” 3.25” 0601-6527 Gloss black 5.5” 31.75” 5.5” 3.25” 1” MOTOHIGH 2.0 HANDLEBARS • Motocross-style handlebar • Aggressive profile • Slotted for internal wiring • 31/ 2” on-center knurling • Available in chrome, gloss black and brushed stainless steel • Will require risers that accept 1” handlebars; sold separately • Made in the U.S.A. NOTE: Will accept heated grips. PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLTRXSE, 24 FLTRX 0601-6525 Chrome 4.75” 32.25” 5.5” 3” 0601-6526 Brushed stainless steel 4.75” 32.25” 5.5” 3” 0601-6524 Gloss black 4.75” 32.25” 5.5” 3” 1” MOTOMID 2.0 HANDLEBARS • Motocross-style handlebar • Aggressive profile • Slotted for internal wiring • 3 1/ 2” on-center knurling • Will require risers that accept 1” handlebars; sold separately • Made in the U.S.A. NOTE: Will accept heated grips. 0601-6525 0601-6526 0601-6524 0601-6527 0601-6529 0601-6528 11 DRAGSPECIALTIES.COM AUGUST 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR MOST 99-24 MODELS W/ 3 1/2” ON-CENTER RISERS 0601-6784 0601-6780 8” 31-1/2” 3-1/2” 23/4” 0601-6785 0601-6781 10” 31-1/2” 3-1/2” 23/4” 1 1/ 4” TOP-GUN T-BAR HANDLEBARS • Stainless steel handlebars are manufactured with the highest quality construction, including machined control mounts (not swaged) and laser-cut, burr-free holes for internal wiring and slots for electronic throttle control • Available in 8” and 10” height options with high luster chrome or gloss black finish for an unsurpassed appearance • All handlebars are 1 1/ 4” diameter with 3 1/ 2” on-center mounting geometry • Work with standard controls, including hydraulic clutch and OE heated grips • Include machined 1/ 2”-13 mounting threads for an extremely rigid and strong connection to the bike • CNC mandrel bent for an accurate fit and incorporate wrist angles designed for riding comfort • Preloaded with E-Z pull-thru sleeving to make wiring installations a breeze 0601-6780 0601-6784 PART # DESCRIPTION FOR 84-23 FLT/FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE AND 18-24 SOFTAIL 0604-0300 Black 0604-0302 Raw 0604-0301 Red PART # DESCRIPTION FOR MOST 84-17 FXST/FLST (EXCEPT 00-07 FXSTD, 11-13 FXS), 91-17 FXD/FXDWG (EXCEPT 08-12 FXDB), 82-00 FXR, 73-86 FX AND 73-03 XL 0604-0297 Black 0604-0299 Raw 0604-0298 Red SOLID RISER BUSHING KITS • CNC machined from billet aluminum • Removes handlebar slop associated with tall risers and handlebar setups • Sold as a set of four 0604-0298 0604-0302 0604-0300 12 AUGUST 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0630-3404 Black/bronze 0630-3403 Black/silver 0630-3405 Graphite/black PART # DESCRIPTION 0630-3406 Graphite/gun metal 0630-3408 Gum/black 0630-3402 Matte black/black RUFFIAN LOCK-ON™ GRIPS • Moto inspired grip designed for performance V-Twin • Legendary Ruffian full-knurl diamond pattern • Thin profile delivers amazing control, feedback and traction • Proprietary medium-compound durometer improves overall comfort and durability • In-molded throttle tube with integrated application specific throttle actuation • Billet aluminum Lock-On™ style clutch-side clamp provides simple installation and removal • Sold in pairs FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 09-24 H-D FL TRIKE, 16-24 SOFTAIL, 20-23 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE (EXCEPT MODELS W/ AIR–ASSISTED FORKS) PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE AND 23-25 FLHXSE/FLTRXSE 0611-0217 Chrome PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE AND 23-25 FLHXSE/FLTRXSE (CONT) 0611-0216 Black FRONT BRAKE MASTER CYLINDER COVERS • CNC machined from billet aluminum • Matching hardware included • Very easy installation 0611-0217 0611-0216 0630-3405 0630-3403 0630-3404 0630-3406 0630-3408 0630-3402 13 DRAGSPECIALTIES.COM AUGUST 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 2330-03311 For 18-24 FXBB/FXST/FXLR 2330-0328 For 06-17 Dyna (except FXDWG) 2330-0329 For 99-05 Dyna (except FXDWG) 2330-0330 For 82-00 FXR S-RT MINI FAIRING LOWERS • Extend the comfort and distinct custom look of any Saddlemen® S-RT mini fairing • Engineered as a perfect complement to S-RT mini fairings (PART #s 2330-0307, 2330-0305, 2330-0309, 2330-0308) • Durable ABS construction in gloss black finish • Mounting hardware included PART # DESCRIPTION 0504-0437 For 14-23 FLHR/FLHT/FLHTCU/FLHX/FLTR BRL BELLY PAN • Hoppe Engineering partnered with the Bagger Racing League (BRL) to produce lightweight, cost-saving racing parts • Same technology allows you to have the ultimate racer look and performance • Helps direct air to engine • Lightweight fiberglass construction PART # DESCRIPTION 2107-0360 For 14-23 FLHR/FLHT/FLHTCU/FLHX/FLTR BRL AIR SCOOP/H ORN COVER • Hoppe Engineering partnered with Bagger Racing League (BRL) to provide strong, lightweight, cost-effective racing parts • Same technology is now being offered to give your bike the ultimate racer look and performance • Air scoop functions as horn cover • Lightweight fiberglass construction 1 Not compatible with FXLRS/FXLRST OEM fairings. 14 AUGUST 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE; 29.5” L OVERALL (12” W FRONT X 9” W REAR) 0801-1944 Smooth, solar-reflective leather 0801-19401 Smooth, vinyl 0801-19411 Double diamond, black thread EXTENDED REACH PERFORMANCE PREDATOR 2-UP SEATS • High-quality automotive-grade vinyl cover • PART #0801-1944 features solar-reflective leather in the seating area and automotive-grade vinyl on the sides • Features a 6” tall driver support with unique styling • Extended reach seat moves the driver back 1.75” from stock. • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Fits with all Drag and most H-D sissy bars • Made in the U.S.A. PART # DESCRIPTION EMIS* 12 MM NARROW BAND O2 SENSORS 1860-2512 For 17-20 Touring/Trike (front); repl. OEM #32700046 4 1860-2507 For 10-20 Touring/Trike (rear); repl. OEM #27809-10 4 1860-2508 For 10-16 Touring/Trike, 15-20 XG Street (front); repl. OEM #27729-10 4 1860-2509 For 12-17 Softail, 12-17 Dyna, 13-17 V-Rod (front); repl. OEM #32700005 4 1860-2506 For 12-17 Softail, 12-17 Dyna, 14-21 XL (except RH Sportster), 13-17 V-Rod, 15-20 XG Street (rear); repl. OEM #32700006 4 1860-2510 For 14-21 XL (except RH Sportster) (front only); repl. OEM #32700026 4 18 MM NARROW BAND O2 SENSOR 1860-2513 For 08 V-Rod (front and rear), 09-11 V-Rod (rear); repl. OEM #27703-08 4 O2 SENSORS • Plug-and-play Planar oxygen sensor • Isolated ground for added robustness • Enables closed-loop control for better emissions control • Precision made for outstanding performance • Improved fuel economy and longer sensor life • Manufactured to meet and exceed all OEM specifications • Sold each 1860-2512 1860-2506 1860-2507 1860-2508 1860-2509 1860-2510 1860-2513 0801-1944 0801-1940 0801-1941 0801-1943 0801-1942 1 Not solar-reflective leather PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE; 29.5” L OVERALL (12” W FRONT X 9” W REAR) 0801-19421 Double diamond, silver thread 0801-19431 Double diamond, red thread 15 DRAGSPECIALTIES.COM AUGUST 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=