THE DRAG SPECIALTIES SEPTEMBER 2025 DRAGSPECIALTIES.COM SEPTEMBER 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION EMIS* FOR 07-16 FLHT/FLHR/FLTR/FLHX AND FLTRX 1800-2740 Chrome w/ black highlighted machined end cap 1 1800-2741 Guardian black w/ black highlighted machined end cap 1 SIDEWINDER 2-INTO-1 EXHAUST SYSTEMS • Increased power and torque • Stainless steel header construction • High-flow catalytic converters • Includes adapters that allow use of wide band or stock O2 sensors • Machined aluminum end cap • Deep performance exhaust note • All necessary mounting hardware included • Removable dB reducer included • Made in the U.S.A. NOTE: Exempt per CARB Executive Order (E.O.) #K-010-21 for 07-16 Touring models listed. NOTE: Not for H-D FL Trike applications. 1800-2740 1800-2741
2 SEPTEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION ICE KOLOR FLARE® 2310-0924 Blue ice 2310-0923 Green ice 2310-0921 Orange ice 8” KOLOR FLARE® WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are crafted from acrylic • Ice Kolor Flares® feature a fluorescent edge for extra flair on your bike • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0920 2310-0921 2310-0922 2310-0923 2310-0924 FOR 24-25 FLTRX/FLTRXSTSE, 23-25 FLTRXSE PART NO. DESCRIPTION ICE KOLOR FLARE® (CONT) 2310-0920 Pink ice 2310-0922 Yellow ice
3 DRAGSPECIALTIES.COM SEPTEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION KOLOR FLARE® 2310-0929 Blue 2310-0931 Bronze 2310-0928 Green 2310-0926 Orange 8” KOLOR FLARE® WINDSHIELDS (CONT) 2310-0925 2310-0926 2310-0927 2310-0928 2310-0929 2310-0930 2310-0931 FOR 24-25 FLTRX/FLTRXSTSE, 23-25 FLTRXSE CONT'D PART NO. DESCRIPTION KOLOR FLARE® (CONT) 2310-0930 Purple 2310-0925 Red 2310-0927 Yellow
4 SEPTEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION FOR 24-25 FLTRX/FLTRXSTSE, 23-25 FLTRXSE, 25 FLTRXRRSE 2310-0911 Black 2310-0912 Clear 2310-0913 Dark smoke 2310-0914 Tint 8” SPORT FLARE® WINDSHIELDS • The Sport Flare® is more streamlined and offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Made of Lexan® polycarbonate with FMR hard coating on both sides of the shield for unmatched durability • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. PART NO. DESCRIPTION 2310-0962 For 20-24 FLTRK, 18-20 FLTRXSE, 16-19 FLTR/FLTRU, 15-23 FLTRX/FLTRXS (except 23 FLTRXSE) BRL RACE BUBBLE WINDSHIELD • The exact windshield used in the Bagger Racing League • Designed specifically for high-speed racing and performance • Provides track-inspired aerodynamics while maintaining a sleek, aggressive look that complements your bike • Fits stock fairing • Foam adhesive backed pads protects fairing surface • Includes windshield hardware • Available in dark black smoke • Made in the U.S.A. 2310-0914 2310-0912 2310-0911 2310-0913
5 DRAGSPECIALTIES.COM SEPTEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS MUSTANG Every Mustang seat is made by hand to ensure the finest in quality and comfort for your ride. The Wide Tripper Solo seats feature a low, wide driver’s seating area that gives a cool look and improves comfort for every ride. The durable synthetic glove-leather seat cover has detailed stitching to make the seat a real custom highlight on your ride. PART NO. DESCRIPTION SOLO SEATS 0801-2014 Black w/ black stitching 0801-2021 Black w/dark cherry stitching 0801-2015 Black w/black stitching (backrest included) REAR SEATS 0801-2016 Black w/black stitching WIDE TRIPPER SOLO SEATS WITH DRIVERS BACKREST AND REAR SEATS • Cut low with a 12” wide driver bucket so you can ride low, look cool, and still be comfortable at the end of a day’s ride • Sits the rider slightly lower but at a similar reach to the controls compared to stock • Built-in receiver accepts a fully adjustable and easily removable driver backrest for total lumbar support • Detailed stitching in the highly durable synthetic glove-leather cover makes the Wide Tripper™ a real show winner • Controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • High-quality expanded vinyl cover that offers the appearance of leather and durability to withstand the elements • Matching rear seats sold separately • Made in the U.S.A. 0801-2014 0801-2015 COMES WITH REMOVABLE BACKREST 0801-2021 0801-2016 FOR 24-25 FLHX/FLTRX, 24-25 FLTRXSTSE, 23-25 FLHXSE/FLTRXSE
6 SEPTEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL (113/4” W FRONT X 9” W REAR) 0801-1951 Smooth, solar-reflective leather 0801-19471 Smooth, vinyl 0801-19481 Double diamond, black thread 0801-19491 Double diamond, silver thread 0801-19501 Double diamond, red thread PERFORMANCE PREDATOR 2-UP SEATS • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 5-3/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. 0801-1947 0801-1948 0801-1949 0801-1951 0801-1950 1 Not solar-reflective leather.
7 DRAGSPECIALTIES.COM SEPTEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CHROME GLOSS BLACK DESCRIPTION PULLBACK END RISE WIDTH CENTER WIDTH FOR 24-25 FLHX AND 23-25 FLHXSE 0601-6564 0601-6565 10” Ape Hanger 13” 10” 37-1/2” 12-1/4” 0601-6566 0601-6567 12” Ape Hanger 13” 12” 37-1/2” 12-1/4” 0601-6568 0601-6569 14” Ape Hanger 13” 14” 37-3/4” 12-1/4” 0601-6570 - 16” Ape Hanger 13” 16” 38-1/4” 12-1/4” 1” TOURING HANDLEBARS • Seamless steel tubing • Knurled and slotted for internal wiring • Made in the U.S.A. NOTE: Accepts OEM heated grips. 0601-6567 0601-6564 0601-6570
8 SEPTEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION FOR 17-25 M-EIGHT (114”/117”) 0910-6943 4.016” bore x 4.5” stroke, 114 cu. in.; negative dome (-3.3cc) 11.1 compression 0910-6944 4.075” bore x 4.5” stroke, 117 cu. in.; negative dome (-0.6cc) 11:1 compression 0910-6945 4.080” bore x 4.5” stroke, 118 cu. in.; negative dome (-2.6cc) 11.3:1 compression 0910-6946 4.135” bore x 4.5” stroke, 121 cu. in.; negative dome (-0.5cc) 11.3:1 compression BLACK EDITION PISTON KITS FOR M-EIGHT • Features ArmorX™ piston coating for superior protection in extreme conditions and reduced wear • ArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation • Dome design for improved flame travel to maximize air/fuel burn efficiency • High compression for added power • Superfinish piston pin reduces friction and improves scuff resistance • Enhanced pin oiling for improved lubrication and reduced friction • Augmented ring land details improve ring seal and function • Dedicated rings for precise fit, improved compression and oil control • Fits OEM and Screamin’ Eagle cylinder heads • Kit includes two pistons, rings, piston pins and circlips • Made in the U.S.A. 0910-6943 PART NO. DESCRIPTION 0928-0124 For 17-25 M-Eight QUICKEE PUSHRODS FOR M-EIGHT • Feature revolutionary design – allows quicker, easier installation without the removal of the rocker covers • 0.4375” diameter chromoly steel • Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the pushrod, making installation or removal a snap • Once the pushrod is installed and adjusted, the lock nut prevents the adjuster from moving • The ball ends of the pushrods are drilled so that oil can flow through the pushrod • Enhanced tip profile is designed for M-Eight rocker geometry • Made in the U.S.A. PART NO. DESCRIPTION FOR 07-16 TOURING AND 09-16 H-D TRIKE 0710-0312 Curved blue 0710-0310 Curved gold 0710-0306 Curved purple 0710-0308 Curved red PART NO. DESCRIPTION FOR 07-16 TOURING AND 09-16 H-D TRIKE (CONT) 0710-0311 Knurled blue 0710-0309 Knurled gold 0710-0305 Knurled purple 0710-0307 Knurled red PERFORMANCE OIL DIPSTICKS • It’s time to ditch the old dipstick and start protecting the inside of your investment with Figurati Designs™ Performance oil dipstick • The only way to actively monitor engines health between oil changes now comes with performance stats • Ergonomic handle design makes checking oil and removing metal fragments a breeze • Remove anytime to check engine health • Lightweight, high strength aluminum • 2000 Gauss Neodymium magnet removes harmful metals from engine • Positioned in the running oil flow for maximum filtering • Anti-corrosive components protect from the elements • Anti-Fingerprint (AF) weatherproof coating keeps dipstick looking new • 400 °F heat resistance stands up to the intense temperatures of engine 0710-0305 0710-0306 0710-0307 0710-0308 0710-0309 0710-0310 0710-0311 0710-0312
9 DRAGSPECIALTIES.COM SEPTEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION 2001-3045 Rock guard ROCK GUARD FOR SHARK DEMON® 2 LIGHT • Highly durable hard-coated polycarbonate offers excellent impact resistance and strength with a clear, glass-like transparency • Provides protection against rocks, debris, mud, dust, and other hazards that could potentially damage or scratch your lights • Designed for easy snap-on installation and removal; a snug fit to the light assembly without diminishing illumination • Compatible with most Custom Dynamics Shark Demon® 2 LED lights except Shark Demon 2 7” light w/ color changing backlight PART #s 2001-2925 and 2001-2926 (sold separately) • Sold each PART NO. DESCRIPTION 2040-3444 Selective yellow, SAE lens 2040-3445 White/amber, smoked lens SHARK DEMON® INTEGRATED FRONT TURN SIGNAL VENTS • Replaces the non-illuminated vented speed plates on Custom Dynamics Shark Demon® 2 Dual Headlight kit with vented speed plates and Shark Demon 2 Headlight and Fog Lamp combo kit with vented speed plates (sold separately) • Integrated LED front turn signals with gloss black assembly enhanced with stylish fins that add a trendy, race inspired aesthetic • Decorative mesh enables factory air flow • Comes in single intensity selective yellow turn signal flash with SAE selective yellow lens or dual function white running light with amber turn signal LEDs behind a smoked lens • Equipped with plug-and-play JAE connectors for quick and simple 100% plugand-play installation • DOT compliant PART NO. DESCRIPTION For 23-25 FLTRXSE, 24-25 FLTRX/FLTRXSTSE 2040-3442 Selective yellow, SAE lens 2040-3443 White/amber, smoked lens SHARK DEMON® LED FRONT TURN SIGNALS • Adds additional set of LED front facing running light and turn signals on H-D Road Glide models • Gloss black housing is enhanced with stylish fins that add a trendy aesthetic while decorative metal rivets give the fixture a rugged, industrial look • Dual function run/turn signal LEDs are offered in selective yellow with SAE selective yellow lens or dual color white/amber LEDs behind a smoked lens • I ncludes gloss black steel brackets that bolt to the motorcycle inner fairing with provided hardware • E quipped with plug-and-play JAE pass-through wire harness for quick and simple 100% plug-and-play installation • DOT compliant • Sold in pairs PART NO. DESCRIPTION FOR 25 FXLRS/FXLRST/FXBB/FLFB/FXBR/FLHC 2020-2337 Front, Dynamic Ringz™ 2020-2338 Rear, solid red LEDs PROBEAM® LED TURN SIGNAL INSERTS • High-quality components that deliver a superior brightness and clarity • Featuring smoked lenses; gives a sophisticated appearance while providing maximum illumination • Equipped with JAE connectors for a simple plug-and-play installation • Front Dynamic Ringz™ offer a bright white halo running light with full contrast turn signal flash • Rear, solid red LEDs flash as turn signal only on models with a center taillight • On models without a center taillight, the red LEDs provide dual-intensity function of running, brake & turn signal • Sold in pairs 2020-2337 2020-2338 2040-3443 2040-3442 2040-3444 2040-3445
10 SEPTEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACK FOR 24-25 FLHX, 23-25 FLHXSE (1” DIA. CLAMPING AREA) 0601-6923 0601-6924 13” 34” 151/2” 12” FOR 99-23 FLHT/FLHX (EXCEPT 23 FLHXSE), 14-23 FLHXS, 17-24 FLHTK, 19-25 FLHTCUTG/FLHXXX (1” DIA. CLAMPING AREA) 0601-6925 0601-6926 13” 34” 151/2” 12” 1-1/ 4” EZ INSTALL REDUCED REACH FLAT TOP HANDLEBARS • Bars feature an additional 3” of pullback from the traditional height handlebars • Revolutionary interlocking bolt-together two-piece handle design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 1-1/ 4” diameter x 0.120” wall heavy tube • EZ install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) • Bars are knurled and designed for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. U.S. Patent No. 10,946,926. 0601-6926 0601-6923 CHROME PART NO. GLOSS BLACK PART NO. END RISE WIDTH CENTER WIDTH PULLBACK FOR 99-23 FLHT/FLHX (EXCEPT 23 FLHXSE), 14-23 FLHXS, 17-24 FLHTK, 19-25 FLHTCUTG/FLHXXX (1” DIA. CLAMPING AREA) 0601-6921 0601-6922 13” 34” 15-1/2” 12” 11/ 4” EZ INSTALL REDUCED REACH POINTED TOP HANDLEBARS • Bars feature an additional 3” of pullback from the traditional height handlebars • Revolutionary interlocking bolt-together two-piece handle design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 1-1/ 4” diameter x 0.120” wall heavy tube • EZ install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) • Bars are knurled and notched for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. U.S. Patent No. 10,946,926. 0601-6921 0601-6922
11 DRAGSPECIALTIES.COM SEPTEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CHROME PART NO. GLOSS BLACK PART NO. END RISE WIDTH CENTER WIDTH PULLBACK FOR 24-25 FLHX, 23-25 FLHXSE (1” DIA. CLAMPING AREA) 0601-6927 0601-6928 13” 34” 15-1/4” 12” FOR 99-23 FLHT/FLHX (EXCEPT 23 FLHXSE), 14-23 FLHXS, 17-24 FLHTK, 19-25 FLHTCUTG/FLHXXX (1” DIA. CLAMPING AREA) 0601-6929 0601-6930 13” 34” 15-1/4” 12” 1-1/ 4” EZ INSTALL REDUCED REACH ROUND TOP HANDLEBARS • Bars feature an additional 3” of pullback from the traditional height handlebars • Revolutionary interlocking bolt-together two-piece handle design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 1-1/ 4” diameter x 0.120” wall heavy tube • EZ install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Bars are knurled and designed for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. U.S. Patent No. 10,946,926. PART NO. DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 0630-3391 Chrome 0630-3392 Black FOR 17-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 09-25 H-D FL TRIKE, 16-24 SOFTAIL, 20-23 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-3389 Chrome 0630-3390 Black FOR 99-17 TWIN CAM AND 86-22 XL (EXCEPT 08-17 DRESSER/H-D FL TRIKE, 16-17 SOFTAIL, 16-17 FXDLS, 13-15 FXSBSE, 11-12 FLSTSE AND RH SPORTSTER) 0630-3387 Chrome 0630-3388 Black K25 GRIPS • Super soft, tacky and durable surface • Billet aluminum construction with Kraton rubber grip area • Diamond knurled with closed ends • Small diameter grip helps reduce hand fatigue • Fit 1” handlebars • Sold in pairs 0630-3391 0630-3390 0630-3387 0601-6927 0601-6930
12 SEPTEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION 1130-0889 For models w/ cable clutch 1130-0890 For models w/ hydraulic clutch TITAN HANDGUARDS • Engineered to withstand the challenges of both road and trail by offering protection against wind, debris and unexpected impacts • Merges offroad endurance with urban grit, delivering uncompromising performance with a bold visual statement • Features a black steel outer shell paired with a rugged steel mesh insert • Add modern style to any bike • Simple installation just slide the mirror stem through and tighten the bolt • Fits 1” handlebars • Mirror mounted blinkers will not work in conjunction with these handguards • Sold in pairs PART NO. DESCRIPTION 1603-0420 NXL shift peg NXL SHIFT PEG • Extremely light, ultra high-end shift peg • Made from black anodized CNC-machined billet aluminum with brushed stainless steel cover • All hardware included • Universal fitment • Matching floorboards, mini boards, foot pegs, point and derby covers available • Sold each PART NO. DESCRIPTION 2210-0696 Speedometer relocation kit SPEEDOMETER RELOCATION KIT • Relocates speedometer while converting to T-Bars without sacrificing style • Built tough from billet aluminum to withstand harsh riding conditions • Hassle-free installation • Adjustable angle for preferred positioning • Can be installed on most 1-1/ 4” diameter T-Bars with 31/ 2” spacing • 4-3/ 16” on-center gauge mounting holes
13 DRAGSPECIALTIES.COM SEPTEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION 0640-1831 Chrome 0640-1832 Black CHICANE™ MIRRORS • Dual radius convex glass minimizes blind spots and provides a wider view of what’s behind • Aluminum body • Easy installation with no modifications to motorcycle • Designed to complement the other accessories in the Ciro® Chicane™ line (sold separately) • Sold as a pair 0640-1832 0640-1831 PART NO. DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2030-2419 Chrome PART NO. DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (CONT) 2030-2420 Black CURVED LICENSE PLATE FRAME KIT WITH LED PLATE LIGHT • Aluminum frame with curved design and integrated bright white LEDs • Plug-and-play installation • Fits standard 4” H x 7” W license plate 2030-2419 2030-2420
14 SEPTEMBER 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART NO. DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 1401-1095 19” fender (accepts all 130/60-19 tires) 1401-1093 21” fender (accepts all 120/70-21 and 130/60-21 tires) PRO SHORT FRONT FENDERS • Feature a performance inspired design and an overall short length • Made from a single sheet of 14-gauge steel • Direct bolt-on design • 5.9” wide fenders allow clearance for up to a 14” oversized rotor • Include gloss black anodized billet brackets and necessary installation hardware • Made in the U.S.A. PART NO. DESCRIPTION 1401-1094 For 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE REAL STEEL RAPPER FRONT FENDER • Full-length fender perfectly follows the contour of a 21” front wheel • Made from a single sheet of 14-gauge steel • Direct bolt-on design • 5.9” wide and accepts all 120/70-21 and 130/60-21 tires • Allows clearance for up to a 14” oversized brake rotor • Includes black anodized billet brackets and necessary installation hardware • Made in the U.S.A. 1401-1095 PART NO. DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-1936 W/o driver’s backrest 0801-1937 W/ driver’s backrest PART NO. DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE (CONT) 0801-1938 Extended reach w/o driver’s backrest 0801-1939 Extended reach w/ driver’s backrest ROADSOFA™ DS SEATS • Tall lumbar support and wide driver saddle supports the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Intricate Dragon Scales (DS) stitch pattern offers a unique custom look • Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Extended reach seats relocate the driver’s seating area rearward by a full 2” • Available with or without driver’s backrest • Made in the U.S.A. 0801-1936 0801-1939
15 DRAGSPECIALTIES.COM SEPTEMBER 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS RIVCO Rivco specializes in making high-quality parts and accessories to let you add a custom touch to your ride. All of their products are designed to help you add style, comfort and convenience to your bike and make it a unique, personalized ride. PART NO. DESCRIPTION HARLEY-DAVIDSON 3902-0298 For 14-24 FLT/FLHT/FLHR/FLTR 3902-0299 For 09-13 FLT/FLHT/FLHR/FLTR PART NO. DESCRIPTION INDIAN 3902-0296 For 17-25 models (except Roadmaster Elite and Scout) VERTICAL RECEIVER-STYLE TRAILER HITCH • Laser-cut from high-tensile strength steel • The black powder-coated main hitch is virtually unseen; only the removable vertical receiver remains visible • Hitch is hidden with tongue removed • Tongue is removed in seconds by pulling a pin and sliding it out • Includes mounting hardware • Quick installation NOTE: Tow ball sold separately. For information on the care, safety, maintenance, mounting, manufacturer’s warranty and other information, consult the motorcycle manufacturer’s and the trailer-hitch manufacturer’s publication(s) and/or website(s) for complete information. Towing can negatively affect handling, cornering, stopping and stability and may void your warranty. Towing increases the likelihood of serious injury or death. If you tow a trailer, never exceed the motorcycle manufacturer’s Gross Vehicle Weight. 3902-0296 3902-0298 PART NO. DESCRIPTION 0530-1696 For 09-25 FLHTCUTG/FLHXXX REAR BUMPER FOR TRI-GLIDE • Steel construction • Gloss black finish • Bolt-on design • Works with Rivco’s optional Flag Socket Holder: PART #0521-2190 (sold separately) PART NO. DESCRIPTION 0521-2190 Parade flag pole socket PARADE FLAG POLE SOCKET • Made of strong steel and features a black finish • For flag poles with a 1-1/ 4” diameter • Designed to bolt to any Tri-Glide rear bumper
RkJQdWJsaXNoZXIy NDI5NTY=