THE DRAG SPECIALTIES OCTOBER 2026 DRAGSPECIALTIES.COM OCTOBER 2026 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 17-26 FLHT/FLHX/FLHTK/FLTRX/FLTRU/FLTRK, 17-25 FLHR/FLHRXS (EXCEPT H-D FL TRIKE) 1810-3310 Brushed stainless w/ heat shields 2 1810-3311 Brushed stainless w/o heat shields 2 GASLIGHTER 2-INTO-1 EXHAUST SYSTEM • Mid-length profile 2-into-1 system • 304 stainless steel construction • Hand TIG welded collector muffler • Direct stamped logo • Available in brushed stainless finish, with or without heat shields 1810-3311 1810-3310
2 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS 15” FLARE WINDSHIELDS FOR MEMPHIS SHADES ROAD WARRIOR FAIRINGS • Designed specifically to fit the Memphis Shades Road Warrior Fairing, providing improved airflow management for the rider • Ice Kolor Flare windshields are also made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop • Kolor Flare windshields are made from high-quality acrylic and designed to stand out • Tint Flare® windshields are made from durable, hard-coated polycarbonate • Improves air management at highway speeds over the stock application • Made in the U.S.A. 2310-1019 2310-1021 2310-1022 2310-1023 2310-1024 2310-1018 2310-1020 2310-1011 2310-1012 2310-1013 2310-1014 2310-1015 2310-1016 2310-1017 PART # DESCRIPTION ICE FLARE® 2310-1017 Blue ice 2310-1016 Green ice 2310-1014 Orange ice 2310-1013 Pink ice 2310-1015 Yellow ice PART # DESCRIPTION KOLOR FLARE® 2310-1022 Blue 2310-1024 Bronze 2310-1021 Green 2310-1019 Orange 2310-1023 Purple PART # DESCRIPTION KOLOR FLARE® (CONT) 2310-1018 Red 2310-1020 Yellow TINT FLARE® 2310-1012 Dark smoke 2310-1011 Clear The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. FOR MEMPHIS SHADES ROAD WARRIOR FAIRINGS
3 DRAGSPECIALTIES.COM OCTOBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FLARE® POWERPLUS WINDSHIELDS • The patented Flare® design includes “hips” at the edges that redirect air to add downforce, improving stability compared to a stock windshield • The “flip” at the top pushes air up and back, providing cleaner, less turbulent airflow for both the rider and passenger • Ice Kolor Flare 9” windshields feature a fluorescent edge for extra flair on your bike • Kolor Flare 9” windshields are crafted from acrylic • Tint Flare windshields are available in 9” or 12” • Installs easily with stock hardware and retains stock windshield height adjustability • Check local laws concerning the use of colored windshields in your area • Made in the U.S.A. 2312-1511 2312-1512 2312-1526 NOTE: Klock Werks typically recommends selecting a Flare® size that allows you to comfortably see over the windshield while seated in your natural riding position. NOTE: Clean with gentle solutions like Shine Werks® or mild soapy water. Avoid ammonia, alcohol, or solvent-based cleaners (like Windex®) to preserve tint, coating, and UV protection. If using dish soap, follow with a wax-based cleaner for optimal performance, like Shine Werks, sold separately. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D6331018S and also under International Patents: 324093, 324094, 325192. 2312-1513 2312-1514 2312-1515 2312-1516 2312-1517 2312-1518 2312-1519 2312-1520 2312-1521 2312-1522 2312-1523 2312-1524 PART # DESCRIPTION ICE FLARE® 2312-1517 9” blue ice 2312-1516 9” green ice 2312-1514 9” orange ice 2312-1513 9” pink ice 2312-1515 9” yellow ice FOR 25-26 CHIEFTAIN/ROADMASTER POWERPLUS DARK HORSE AND LIMITED PART # DESCRIPTION KOLOR FLARE® 2312-1522 9” blue 2312-1524 9” bronze 2312-1521 9” green 2312-1519 9” orange 2312-1523 9” purple 2312-1518 9” red PART # DESCRIPTION KOLOR FLARE® (CONT) 2312-1520 9” yellow TINT FLARE® 2312-1511 9” dark smoke 2312-1512 9” tint 2312-1525 12” dark smoke 2312-1526 12” tint
4 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS HOGTUNES When you want to pump up your bike’s audio, look to Hogtunes. For speakers, amps or a full kit, Hogtunes makes products specifically for American V-Twin motorcycles that will fit seamlessly to your bike and give you superior sound you can enjoy in town or at speed. PART # DESCRIPTION 4405-1055 For 24-25 FLHXU 4405-1054 For 24-26 FLTRX 500-WATT AMP/FRONT SPEAKER KIT • Revolutionary ‘front-mounting’ speakers for an easy install • 2 speaker, single-amp system delivering a loud, more aggressive sound with serious output • Features a 500-watt, 2-channel model specific Wild Boar Audio Amplifier • Front mounting 61/ 2” speakers with oversized tweeter and voice coil for extreme power handling and output • Supplied T-Harness makes installation completely seamless without needing expensive digital adaptors • Includes Wild Boar Audio model specific metal-mesh speaker grills PART # DESCRIPTION 4405-1050 For 23-26 FLHXSE, 23-25 FLTRXSE and 24-26 FLHX/FLTRX/FLHXU WILD BOAR 250-WATT FAIRING SPEAKERS • Custom-designed specifically for factory speaker cabinets in 23-26 Touring models • Our loudest, most powerful speaker ever • Unmatched clarity at any volume; clean, detailed distortion free sound • 250W/350 peak; 2-ohms • New dual tweeter design for improved output and reliability • Forced air cooling via large, vented neodymium magnet • Carbon fiber woofer cones for exceptional bass response while remaining lightweight • Direct wiring using OE connectors • 94 dB efficiency • Sold in pairs • Works well with Wild Boar Audio mesh speaker grilles PART #s 4405-1032 and 4405-1033 on page 133 of the 26 Drag Specialties Fatbook PART # DESCRIPTION 4405-1049 For 24-26 FLHX/FLTRX, 25 FLHXU 61/ 2” REPLACEMENT FAIRING SPEAKERS • Installs quickly and easily without removing outer fairing • Direct wiring using OE connectors • 200W RMS-300 peak • High power vented neodymium magnet assembly • 2.0” (50 mm) woofer voice coil for increased power handling • 1.25” (33 mm) precision tuned teteron dome tweeter • Frequency response 40 to 25kHz • 93 dB efficiency • Sold in pairs PART # DESCRIPTION 4405-1048 For 24-26 FLHX/FLHXU/FLTRX w/ factory saddlebag lids RETRO CUT-IN SPEAKER LID KIT WITHOUT SPEAKERS • Includes single-use templates for cutting lids, custom tooled 6” x 9” speaker adaptors, grilles with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug-and-play harnesses • See the 2026 Drag Specialties FatBook for the complete line of HogTunes Retro Cut-In speaker lid kits without speakers U.S. Patent No. D1022962. 4405-1054
5 DRAGSPECIALTIES.COM OCTOBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-26 FLHX/FLTRX/FLTRXSTSE, 23-26 FLHXSE/FLTRXSE W/ 61/2” TALL DRIVER 0801-2378 Black logo/black classic stitch 0801-2380 Black logo/black diamond stitch 0801-2379 Silver logo/silver classic stitch 0801-2381 Silver logo/silver diamond stitch PART # DESCRIPTION FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLTR/FLHR (EXCEPT 23 FLHXSE/FLTRXSE) W/ 63/4” TALL DRIVER 0801-2374 Black logo/black classic stitch 0801-2376 Black logo/black diamond stitch 0801-2375 Silver logo/silver classic stitch 0801-2377 Silver logo/silver diamond stitch SLYFOX CHARIOT 2-UP SEATS • High-quality automotive-grade vinyl on the seating area and the sides • Features either a 61/ 2” or 63/ 4” tall driver support with unique styling (as indicated in the chart) • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLTR/FLHR (EXCEPT 23 FLHXSE/FLTRXSE) 0801-23821 Tall, 30” L overall (91/2” W front x 5” W rear) (153/4” L front x 11” L rear) 0801-23832 Low, 30” L overall (91/2” W front x 5” W rear) (141/2” L front x 11” L rear) SLYFOX RACE 2-UP SEATS • Features a 3” or 43/ 4” tall driver support with unique styling (as noted) • Made from automotive grade vinyl on seating area and carbon fiber sides • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A. 0801-2383 0801-2382 0801-2380 0801-2381 0801-2374 0801-2375 1 Features a 3” tall driver support. 2 Features a 43/4” tall driver support.
6 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0929-0094 For 17-26 M-Eight; repl. OEM #s 17900034, 17900035 LIFTER CUFFS • Feuling® Lifter cuffs are injection molded glass-filled nylon with PTFE added to increase wear and friction resistance • Stronger than factory replacements with added friction reducer • Developed due to billet lifter cuffs being found to cause debris and harmonics due to rubbing on the lifter flats • Increased clearances for larger lift camshafts • Able to use with up to Feuling 618 camshaft without modification • Factory allows up to approximately 0.550” lift • Recommended to be used with Feuling lifters as they fit the tightest, however other branded lifters are compatible • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0940-2238 CVO Gate logo 0940-2236 Feuling logo PART # DESCRIPTION 0940-2237 Flag Reverse logo 0940-2235 Wrench Cross logo CAM TIMING COVERS • Gloss black powder coat with an engraved logo • Include ARP® fasteners • Sold each • Made in the U.S.A. PART # DESCRIPTION EMIS* 1010-3454 Repl. air filter for Assault Charge High-Flow air cleaners 2 REPLACEMENT BLACK AIR FILTER • Fits all Trask Assault Charge High Flow Air Cleaners (sold separately) PART # DESCRIPTION 1011-5119 Repl. air filter for Big Papi High-Flow air cleaners REPLACEMENT AIR FILTER • Fits all Trask Big Papi High-Flow Air Cleaners (sold separately) 0940-2235 0940-2236 0940-2237 0940-2238 FOR 24-26 FLHX/FLTRX, 23-26 FLHXSE, 23-25 FLTRXSE, 26 H-D FL TRIKE, 25-26 SOFTAIL
7 DRAGSPECIALTIES.COM OCTOBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 24-25 FLHX/FLTRX, 23-25 FLTRXSE/FLHXSE/FLTRXSTSE, 25 FXBR/FXLRS/FXST/FXBB/FXLRST/FLHCS/FLFBS 0904-0257 Black w/ black aluminum 3 0904-0256 Stainless w/ black aluminum 3 0904-0258 Polished w/ polished aluminum 3 FOR 17-25 FLHR/FLHRXS, 19-22 FLHT, 17-23 FLHTK/FLHX/FLHXS,17-21 FLHTKSE, 17-19 FLHTKL/FLTRU, 17-22 FLHXSE, 22 FLHXST/FLTRKSE, 22-23 FLTRXST, 20-23 FLTRK, 18-22 FLTRXSE, 22-24 FXRST/FXLRST, 20-24 FXLRS/FXST, 18-24 FXBR/FXBRS/FXBB/FXBBS/FLHC/FLHCS/FLFB/FLFBS/FXFB/FXFBS/FXLR/FXLRS, 19-20 FXDR, 18-21 FLSB 0904-0260 Black w/ black aluminum 3 0904-0259 Stainless w/ black aluminum 3 0904-0261 Polished w/ polished aluminum 3 TORNADO STAGE 2 TURBO KITS • Designed for 117” and larger M-Eights seeking maximum performance • Capable of 170-200+ HP at 8 lbs. of boost on pump gas with proper engine build • Larger Trask turbocharger paired with upgraded larger diameter tailpipe • Trask compressor and turbine housing with Garrett internals • Trask plenum with integrated blow-off valve • Kit includes all required installation components: larger injectors, spark plugs, boost gauge with mount, oil feed and drain lines, custom cam cover, ThunderMax tune files and all necessary hardware and gaskets • Made in the U.S.A. NOTE: Requires use of ThunderMax ECM (sold separately). NOTE: Does not fit Twin cooled models or models with fairing lowers that cannot be removed. NOTE: Intended for offroad use only and recommended for experienced riders. NOTE: Stage 1 Tornado Turbo customers can upgrade to Stage 2 by installing the larger turbocharger and matching larger tailpipe (contact Trask for more information). 0904-0257 0904-0258 0904-0259
8 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2330-0340 For 24-25 FLTRX/FLTRXS/FLTRXSTSE, 23-25 FLTRXSE, 26 FLTRT HIDDEN FAIRING BRACKET • Replaces bulky factory fairing support for a cleaner, streamlined front end • Machined from billet aluminum for strength with reduced weight compared to stock • Sleek, low-profile design blends seamlessly with the fairing and frame • Provides proper fairing support without external clamps or brackets • Direct bolt-on replacement with no fabrication or modification required • Improves fairing rigidity while maintaining a clean, modern appearance • Made in the U.S.A. PART # DESCRIPTION 0506-2576 For 24-25 FLHX/FLHXU/FLTRX, 23-25 FLTRXSE/FLTRXSTSE/FLHXSE ASSAULT ENGINE GUARD • Provides limited cosmetic vehicle protection from low-speed tip-overs • Designed to work specifically with Trask Stage 2 turbochargers (sold separately) • Unique low-profile design • Knurled and engraved replaceable delrin slider ends • Dimpled for additional fender clearance NOTE: Will not work with CVO style chin spoiler. PART # DESCRIPTION 1510-1370 Docking kit for Assault series subframe DOCKING KIT FOR ASSAULT SERIES SUBFRAME • CNC machined billet aluminum • Designed specifically for the Trask Assault series subframe (PART #0501-0123) • Provides secure, precision-fit mounting points for a Tour-Pak or backrest • Maintains subframe rigidity and performance without unnecessary weight • Raw finish for coating or polishing • Made in U.S.A. PART # DESCRIPTION 0940-2246 For 24-26 FLHX/FLTRX, 23-26 FLHXSE, 23-25 FLTRXSE, 26 H-D FL Trike, 25-26 Softail CAM TIMING COVER • Direct replacement for stock cam timing cover • CNC machined from billet aluminum for strength and reduced weight • Lighter than the factory cover while maintaining proper fitment • Precision machined for a clean, high-end finish • Completes the look of performance bagger builds • Designed to match other Trask billet performance components • Installs using factory mounting points with no modification required • Made in the U.S.A.
9 DRAGSPECIALTIES.COM OCTOBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2040-3512 For 26 FLHXL/FLHXLSE/FLHXSTSE/FLHLT/FLHTLTSE, 25 FLHXU, 24-26 FLHX, 23-25 FLHXSE LED SEQUENTIAL WINDSHIELD TRIM • Slimline smoked diffused lens spans the lower centre windshield edge • Bright white running light with amber turn signal • Magnetically programmable turn signal modes: solid on, sequential on, sequential off • Decorative mesh insert fills the gap between centre windshield trim and fairing • Gloss black finish on housing and mesh • Integrated isolators snap directly into OEM fairing air duct cover • True plug-and-play installation; no cutting or splicing PART # DESCRIPTION FOR 23-26 FXBR, 22-26 FXBBS/FXLRST, 22 FXRST, 20-26 FXLRS, 20-24 FXST, 18-26 FLFB, 18-21 FXBB/FLSL, 18-20 FXLR/FXBRS, 18-19 FXBR 2020-2427 Chrome 2020-2426 Black PART # DESCRIPTION FOR 16-17 FXDLS, 10-17 FXDB, 09-10 FXDFSE, 08-17 FXDF, 05-15 FXDX, 05-14 FXDC, 01-03 FXDXT, 00-17 FXDWG/FXDL, 00-10 FXD, 00 FXDS-CONV 2020-2429 Chrome 2020-2428 Black HIGH-OUTPUT LED REAR STRUT TURN SIGNAL KIT • Flush-mounted for a modern, seamless look on rear fender struts • Red LEDs provide both low intensity and high intensity functions for extra safety • Durable metal housings available in chrome or textured matte black finish • Stainless hardware kit ensures lasting, corrosion resistant installation • Includes optional mounting bracket extension for more compatibility • Wire terminals supplied unpinned with a 4-pin JAE connector for easy plug-and-play connection PART # DESCRIPTION 2040-3510 Red lens PART # DESCRIPTION 2040-3511 Smoked lens SADDLEBAG LIGHTS • Red run/brake/turn functions with red or smoked lens • Matte black low-profile housing • Angled to match OEM saddlebag contour • Vertical mount to saddlebag bottom • Mounts using automotive-grade 3M™ adhesive • Plug-and-play installation with included harness • Sold in pairs PART # DESCRIPTION 2010-1580 For 25 FLHCS/FXLRS/FXLRST TAILLIGHT BASE PLATE • Direct replacement for OEM taillight baseplates; OEMstyle look • Durable molded ABS plastic construction with black finish • Metal threaded inserts for secure taillight mounting NOTE: FXLRST require removal of OEM rear turn signals for installation. May also require an additional taillight wire harness PART #s 2130-0352 or 2130-0353 (sold separately). 2040-3511 2040-3510 2020-2428 2020-2427 FOR 22-26 FXLRST, 22 FXRST, 18-21 FLSB (W/ OEM SADDLEBAGS)
10 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE AND 23-25 FLHXSE/FLTRXSE 3501-2080 Chrome 3501-2079 Black 3501-2244 Gloss black SADDLEBAG HINGE COVERS • Remove the cheap looking plastic covers on stock Road Glide and Street Glide saddlebags and replace them with stylish billet aluminum CNCmachined covers • Easy installation • All hardware is included • Sold in pairs 3501-2079 3501-2080 KODLIN USA Established in 2020, Kodlin U.S.A. pushes the boundaries of what a custom motorcycle can be. The parts and accessories are a hybrid of American and European design influences that have merged to create custom parts that have a distinct fit, form and functional characteristics unlike anything else in the American V-Twin market. PART # DESCRIPTION EMIS* 1010-3207 Chrome 2 1010-3206 Gloss black 2 OVAL AIR CLEANER FOR M-EIGHT ENGINES • Made from CNC-machined billet aluminum • Comes in black or chrome finish • High performance washable K&N® air filter for up to 50% more airflow is included • Clean look with hidden bolts design • Sold as kit; all hardware included NOTE: 49-state U.S.A. EPA-compliant. PART # DESCRIPTION 0703-0956 Chrome 0703-0957 Gloss black ASCENT PRO GAS CAPS • CNC machined from billet aluminum • Chrome or black anodized finish • Very easy installation • Replaces the stock gas cap 0703-0956 0703-0957 FOR 24-25 FLHX/ FLTRX/ FLTRXSTSE, 23-25 FLHXSE/ FLTRXSE, 25 SOFTAIL FOR 24-26 FLHX/FLTRX, 23-26 FLHXSE/FLTRXSE, 26 FLHXSTSE, 25 FLHXU
11 DRAGSPECIALTIES.COM OCTOBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 2107-0359 Chrome 2107-0358 Black anodized 2107-0361 Black gloss HORN RELOCATION KITS • Specifically designed to replace the “afterthought” stock horn on the left side of the new Touring models • Cover is CNC machined from billet aluminum • Kit includes a replacement horn for relocation under the seat and a wiring harness 2107-0358 2107-0359 PART # DESCRIPTION END RISE WIDTH CENTRE WIDTH PULLBACK FOR 24-26 FLTRX, 23-26 FLTRXSTSE, 25-26 FLFB/FXBR (11/4” CLAMPING AREA) 0601-7090 Chrome 4” 311/2” 6” 4” 0601-7089 Black 4” 311/2” 6” 4” FOR 25-26 FXBB/FXLR/FXLRS/FXLRST/FLHC (1” CLAMPING AREA) 0601-7088 Chrome 4” 311/2” 6” 4” 0601-7087 Black 4” 311/2” 6” 4” ALUMINUM TRACKBARS W/ HEATED GRIPS • Available for 1” and 11/ 4” bar clamp sizes • Made of aluminum • Designed to work with heated grips • Drilled and slotted for internal wiring • Laser-etched Kodlin Motorcycles logo • Perfect addition to Kodlin Ascent Risers • Available in chrome or black NOTE: Fits 23-26 FLTRXSE with up to 10” risers; can use OEM cables/lines/wires. 0601-7088 0601-7089 PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE AND 23-25 FLHXSE/FLTRXSE 0611-0217 Chrome 0611-0216 Black 0611-0220 Black gloss FRONT BRAKE MASTER CYLINDER COVERS • CNC machined from billet aluminum • Matching hardware included • Very easy installation 0611-0216 0611-0217
12 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTRE WIDTH PULLBACK FOR 24-26 FLTRX/FLTRXSTSE, 23-25 FLTRXSE (11/4” CLAMPING AREA) 0601-7099 0601-7098 12” 31.5” 9.5” 4” 0601-7101 0601-7100 14” 31.5” 9.5” 4” 1½” JASON HANDLEBARS • Provides an ape hanger look with the T-bar club style feel on a bagger • TIG welded for maximum durability • Knurled at the clamp to prevent bar slipping • Drilled and slotted for internal wiring CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTRE WIDTH PULLBACK FOR 24-26 FLHX, 23-26 FLHXSE, 25 FLHXU (1” CLAMPING AREA) 0601-7095 0601-7094 13” 38.25” 11.5” 5.5” 0601-7097 0601-7096 15” 37.75” 11.5” 7” 11/ 4” BAGGER APE HANGERS • Optimum high-bar styling custom tailored for baggers • CNC-bent curves snake around gauges and avoid interfering with speakers or fairing mounted mirrors • 1” clamping area, drilled for internal wiring • Require longer cables/lines/electrical wiring for installation • Made in the U.S.A. NOTE: Not for use with heated grips. 0601-7095 0601-7096 0601-7100 0601-7099
13 DRAGSPECIALTIES.COM OCTOBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 23-26 FXLRS, 25-26 FXLRST/FXBB 0602-1657 7” riser kit w/ 4” Softail gauge mount 0602-1656 10” riser kit w/ 4” Softail gauge mount FOR 18-24 FXBB/FXBBS/FXST 0602-1655 7” riser kit w/ Softail gauge cutout 0602-1654 10” riser kit w/ Softail gauge cutout UNIVERSAL 0602-1653 7” riser kit w/o gauge mount 0602-1652 10” riser kit w/o gauge mount METHOD WAYBACK RISER KITS • 7” or 10” height risers with an added 3” pullback for added comfort without sacrificing control • CNC machined from solid blocks of billet aluminum with a black anodized finish • Specially designed uprights allow riser to be installed in the centre of the factory triple tree nacelle opening on 24-26 FLTRX models • Risers and top clamp feature machined windows and sculpted pockets • Integrated crossbar adds rigidity to the handlebar risers and is used as a wire guide • 3.5” on-centre riser mounting • Accepts 1” diameter handlebars • Riser kits with Softail 4” round gauge mounts accept factory 23-26 FXLRS, 25-26 FXLRST/FXBB round gauges • R iser kits with Softail gauge cutout top clamps accept factory 18-24 FXBB/FXBBS/FXST gauges • 4 ” Method speedo mount PART #2210-0677 is available separately to add a 4” gauge to the top or bottom of the Method Riser kits without the Softail gauge cutout or mount (compatible with many OEM H-D 4” gauges and rubber gasket OEM #67121-95A is required for proper fitment) 0602-1655 0602-1652 PART # DESCRIPTION FOR 23-26 FXLRS, 25-26 FXLRST/FXBB 0602-1659 7” 0602-1658 10” METHOD KICKBACK RISER KITS • 7” or 10” height risers with an added 11/ 2” kickback to provide the proper mix of comfort and control • CNC machined from solid blocks of billet aluminum with a black anodized finish • Risers and top clamp feature machined windows and sculpted pockets • Integrated crossbar adds rigidity to the handlebar risers and is used as a wire guide • 4” round gauge mounts accept factory 23-26 FXLRS, 25-26 FXLRST/FXBB gauges • 3.5” on-centre riser mounting • Accepts 1” diameter handlebars 0602-1658 0602-1659 0602-1657
14 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0408-0475 For 24-26 FLHX/FLHXL/FLHXU/FLTRX/FLTRXL (except FLHXSE/FLTRXSE) METHOD 7° TRIPLE TREE KIT • Features 7 degrees of rake to allow the installation of 21” x 180 mm front wheels • Retains factory quality handling or better, the 7 degree rake results in factory rake/trail geometry when using the wide 21” front wheel • P ositions the wheel almost 2” forward, allowing the use of full-length fenders without any clearance issues • D esigned to fit both Road Glide and Street Glide models with 49 mm conventional forks • C an be installed on Road Glide models with or without fork nacelle cover (when running without adding fork lock cover is recommended for a clean look; not included) • Accepts factory fork lock • Includes lower bearing with race and tree ear spacer • CNC machined from solid billet aluminum • Black anodized finish PART # DESCRIPTION 0408-0474 For 24-26 FLTRX/FLTRXL (except FLTRXSE) METHOD TOP TRIPLE TREE • Lightweight design features Method styling and cut through windows • Designed to fit 24-later Road Glide models with 49 mm conventional fork legs • Accepts factory fork lock and requires removal of plastic factory for nacelle • CNC machined from 6061 billet aluminum • Black anodized finish • Includes ignition switch cover, top fork nut, dust cover and necessary mounting hardware
15 DRAGSPECIALTIES.COM OCTOBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0521-2200 FOR 24-26 FLHX/FLHXSTSE/FLTRX/FLTRXSTSE, 23-26 FLHXSE/FLTRXSE CARBON FIBER COMPLETE BODYWORK KIT • Engineered to transform FLHX and FLTRX models into a Custom Carbon Performance Bagger • Designed for riders who demand reduced weight, aggressive styling and race-inspired materials • Replaces key factory stamped steel components with premium 3k pre-preg carbon fiber for superior strength-to-weight performance and custom look • Each part features custom body lines and styling • Direct bolt-on installation (no cutting or modification required) • High-gloss UV-resistant clear coat protects against yellowing and fading • Reduced weight over factory bodywork (saves over 11 lbs.) • Includes 19” Pro Sport front fender, rear fender, tank dash, side covers and coil cover PART # DESCRIPTION 1401-1206 For 24-26 FLHX/FLHXL/FLHXSTSE/FLHXU/FLTRX/FLTRXL/FLTRXSTSE, 23-26 FLHXSE, 23-25 FLTRXSE 1401-1205 For 17-25 FLHRXS, 24 FLHTK/FLTRK, 14-23 FLHT/FLHX/FLHR/FLTR (except 23 FLHXSE/FLTRXSE), 14-25 H-D FL Trike 1401-1204 For 99-13 FLHT/FLHX/FLHR/FLTR, 09-13 H-D FL Trike CARBON FIBER 21” WRAPPER FRONT FENDERS • Full length front fenders with custom double window and made from 3k prepreg carbon fiber • Smooth flowing design perfectly wraps the front wheel on Touring models while reducing weight • Finished in high gloss clear coat that is UV-resistant and ready for installation • Direct bolt-on fitment, no additional brackets required • Accepts all 130/60-21 front tires
16 OCTOBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION CHROME BLUE GOLD RED FRONT RIMS 19” x 3.25” 0201-2658 0201-2660 0201-2662 0201-2664 21” x 3.5” 0201-2659 0201-2661 0201-2663 0201-2665 FRONT/REAR RIM 18” x 5.5” 0202-2285 0202-2286 0202-2287 0202-2288 FORGED BILLET FLATLINE RIMS • CNC machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the centre of the hub to the edge of the rim • Accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings NOTE: Arlen Ness hub kits must be purchased separately to install (see page 1960 of the 2026 Drag Specialties FatBook). NOTE: 18” x 5.5” front applications also requires separate purchase of Arlen Ness Fat Tire fork boot covers or Fork Tube guards to install (please see FRAMES & SUSPENSION section in the 2026 Drag Specialties FatBook). 0201-2658 W/ CHROME HUB INSTALLED 0202-2288 W/ BLACK HUB INSTALLED 0202-2286 W/ BLACK HUB INSTALLED 0201-2662 W/ BLACK HUB INSTALLED
RkJQdWJsaXNoZXIy NDI5NTY=