THE DRAG SPECIALTIES MARCH 2026 DRAGSPECIALTIES.COM MARCH 2026 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS HIGH HORSEPOWER 2-INTO-1 EXHAUST SYSTEM • Designed for engines producing 140+ horsepower • Full stainless steel construction • 13/ 4” headpipes step up to 2” then 21/ 8” at the collector to increase exhaust flow and maximize performance • 4” OD straight can muffler body with polished billet end cap • Muffler body is 24” L • Removable spiral-core louvered baffle included • Heat shields included • Made in the U.S.A. 4” SLIP-ON MUFFLER • Fits to the stock exhaust header with no modifications required • 4” OD muffler body with a perforated baffle core for an aggressive exhaust note • Matching billet end cap • Made in the U.S.A. 1811-4938 1811-4939 PART # DESCRIPTION EMIS* 1800-2779 For 17-25 FLHT/FLHTK/FLHR/FLHX/FLTRX/FLTRU/FLTRK/FLTRXRRSE 3 PART # DESCRIPTION EMIS* 1811-4939 Chrome 3 1811-4938 Black 3 FOR 25 SCOUT
2 MARCH 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS KHROME WERKS More than just exhaust! Khrome Werks also makes stylish, clean handlebars for your late-model M-Eight Bagger. The Buck 50 handlebars install without needing any fairing modifications, work with the stock handlebar clamps and control perches, and have clean cutouts for easy internal wiring. CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24-25 FLHX/FLHXU, 23-25 FLHXSE (1” CLAMPING AREA) 0601-6978 0601-6980 9-3/4” 36-5/8” 12” 9-3/4” 0601-6979 0601-6981 11-3/4” 36-3/4” 12” 10” FOR 24-25 FLTRX/FLTRXSTSE/FLTRXP, 23-25 FLTRXSE (11/4” CLAMPING AREA) 0601-6982 0601-6984 9-1/2” 35-1/8” 8-1/2” 7-1/4” 0601-6983 0601-6985 11-1/2” 35-1/2” 8-1/2” 7-3/4” 11/ 2” BUCK 50 HANDLEBARS • 11/ 2” diameter bars • Features a stepped design for use with the factory clamp and perches • Requires no modifications to fairing or fairing grommets • Clean cutouts for easy wiring • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. PART # DESCRIPTION EMIS* FOR 17-24 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2776 Chrome 2 1800-2775 Black 2 1800-2777 Eclipse 2 ICON SR 2-INTO-2 EXHAUST SYSTEMS • Engineered for performance, style and sound • Improves torque and horsepower • Removes OEM catalytic converter from the header pipe to reduce heat and improve rider comfort • Fits directly under factory heat shields to maintain OEM styling • 18 and 12 mm O2 bungs welded into header primaries for stock or tuning applications • 16-gauge 1.75” primaries • Uses the existing crossover pipe • 4.5” HP Plus compliant mufflers deliver Khrome Werks signature aggressive sound • End caps sold separately • Tune the sound and performance with optional Khrome Werks Cone Reducers and Sound kits (sold separately) • Made in the U.S.A. NOTE: Icon SR systems do not come with end caps. 1800-2775 SHOWN WITH OPTIONAL END CAP 1861-1456 0601-6985 0601-6978
3 DRAGSPECIALTIES.COM MARCH 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS COLOUR 2” 3” 4” 5” 6” 7” FOR 24-25 FLTRX, 23-25 FLTRXSE Dark black smoke 2310-0963 2310-0966 2310-0969 2310-0972 2310-0975 2310-0978 SPOILER WINDSHIELDS FOR OEM FAIRINGS • Designed to be looked over, the spoiler windshield diffuses the airstream, effectively slowing the flow without buffeting • Made of aircraft-grade Lucite® for excellent optics and durability • Available in dark black smoke • Use OEM hardware for a perfect fit • Made in the U.S.A. 2310-0963 2310-0966 2310-0969 2310-0972 2310-0975 2310-0978
4 MARCH 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS 800-WATT AMP/SPEAKER KIT WITH CUT-IN LID KIT • Kit includes: 2 - 400W amps, pair of 200W 6 1/ 2” front speakers that blend seamlessly into fairing, and a pair of 300W, 6” x 9” speakers that mount in existing saddle bag lids using the included lid kit • Dual WBA 400.2r amplifiers are designed to fit seamlessly inside the inner fairing • Pre-tuned to the factory radio for a straightforward installation process • Ensures compatibility and safety with your bike’s charging system • Comes with all necessary hardware and wiring • Includes a plug-and-play wire harness that allows the radio’s fader to function • All required wiring and hardware included NOTE: May require a radio software reflash. 4405-0991 4405-1014 PART # DESCRIPTION 4405-09911 For 20-24 FLTRK, 15-23 FLTRX (except 23 FLTRXSE), 16-19 FLTRU 4405-1014 For 14-24 FLHTK, 14-23 FLHX (except 23 FLHXSE), 14-19 FLHTCU 1 Black trim and chrome trim front speaker grilles included. PART # DESCRIPTION 4405-1033 For 24-25 FLHX, 25 FLHXU 4405-1032 For 24-25 FLTRX METAL MESH SPEAKER GRILLS • Very nice cosmetic improvement versus stock plastic grill • Metal mesh is far less restrictive for sound versus factory plastic grills • Includes factory style “body clips” to make installation fast and easy • 1 mm thick metal mesh comes painted gloss black • Can be used with most replacement speakers • Sold in pairs 4405-1032 4405-1033
5 DRAGSPECIALTIES.COM MARCH 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE; 29” L OVERALL (121/2” W FRONT) (6” W REAR) 0801-2171 Smooth, solar-reflective leather 0801-21661 Smooth, vinyl 0801-21671 Double diamond, black thread 0801-21701 Double diamond, red thread 0801-21681 Double diamond, silver thread FREEDOM 2-UP SEATS WITH FORWARD POSITIONING • Features solar-reflective leather in the seating area and automotive-grade vinyl on the sides (unless noted); the unique finishing process has been shown to reduce surface temperature by as much as 25 °F for a cooler seat, higher durability and longer life over conventional leather or vinyl • Features a 6” tall driver support with unique styling • Moves rider forward approximately 2” and lowers rider 1” in comparison to stock seat • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A. 0801-2171 0801-2166 0801-2167 0801-2170 0801-2168 1 Not solar-reflective leather.
6 MARCH 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 18-25 FXBB/FXBBS/FXST 0802-1692 Blue LS 0802-1697 Gold LS 0802-1693 Orange LS PART # DESCRIPTION FOR 18-25 FXBB/FXBBS/FXST 0802-1694 Red LS 0802-1695 Silver LS 0802-1696 White LS PRO SERIES SDC PERFORMANCE GRIPPER SEATS WITH BACKREST • True performance-oriented comfort seats with contoured lines, bucketed driver’s seating area and substantial lumbar support • Crafted with carbon fiber (CF) on the seating portion, black gripper on the lumbar support and SaddleHyde™ sides • Lattice stitch (LS) design infuses old-school styling with a modern twist • Add a pop of color or match your accessories with available accented stitch colors • Features GelCore™ technology that reduces engine vibration by up to 50% and road impacts by up to 92% for a noticeably comfortable ride • Made in the U.S.A. 0802-1694 0802-1692 0802-1696
7 DRAGSPECIALTIES.COM MARCH 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0822-0640 Black w/ black diamond stitching DELUXE TOURING CHOPPED TOUR-PAK PAD • Features black vinyl with Diamond stitch pattern • Provides comfort for passenger with contoured design • Designed for Chopped Tour-Pak only • Made in the U.S.A. 0822-0640 PART # DESCRIPTION FOR 25 FLHXU, 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-1903 Black w/ black stitching 0801-1907 Black w/ black stitching; w/ smooth passenger seating area SQUAREBACK ONE-PIECE SEAT • Positions riders similar to stock with enhanced lower-back support • Cover features split-panel, Tuck-and-Roll stitching with contrasting perforated and smooth vinyl, and integrated brass grommet accents • Flat tail section allows for comfortable two-up riding or a level foundation for luggage • Made in the U.S.A. 0801-1907 PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE , 23-25 FLHXSE/FLTRXSE 0801-2127 Black w/ black diamond stitching REMOVABLE DRIVER BACKRESTS 0822-0650 Black w/ black diamond stitching ONE-PIECE DELUXE TOURING SEATS • Ultimate in design and cushioning • Seat sits the driver 1.75” farther back than stock FLHT seat • Top covering made of highest quality expanded vinyl and baseplate is marine-grade fiberglass • Seat is available with or without heating element • Heated seat comes complete with wire harness that hooks to the accessory port at the front of the battery • Dual-zone high/low heat settings for driver and passenger seats are controlled with illuminated switches on the side of the seat • Optional driver backrests sold separately • Made in the U.S.A. 0822-0650 0801-2127
8 MARCH 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* W/ CHAIN DRIVE CAM 0925-1642 W/ chrome pushrod tubes 3 0925-1641 W/ black pushrod tubes 3 496 CAM KITS WITH PUSHROD TUBES FOR M-EIGHT • S&S Quickee Pushrods with chrome or gloss black pushrod tubes • S&S premium tappets • Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion • Improves tappet stability in high-lift situations • 496 cams are compatible with stock or S&S rocker arms and springs • Compatible with round or oval port valve springs • Boost power and gives a racy, aggressive sound at idle • All kits include necessary gaskets, bearings and hardware required for a complete installation • Made in the U.S.A. 0925-1642 FOR 17-25 M-EIGHT (EXCEPT CVO 121”)
9 DRAGSPECIALTIES.COM MARCH 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* W/ GEAR DRIVE CAM 0925-1644 W/ chrome pushrod tubes 3 0925-1643 w/ black pushrod tubes 3 496 CAM KITS WITH PUSHROD TUBES FOR M-EIGHT (CONT) 0925-1643 FOR 17-25 M-EIGHT (EXCEPT CVO 121”) CONT'D
10 MARCH 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 16-25 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK/H-D FL TRIKE, 15 FLHTCUL/FLHTKL 1107-0776 Black anodized 1107-0777 Silver anodized CLEAR DERBY COVERS • Features a clear window to the internal clutch components • Machined from billet aluminum with a black or silver anodized finish • Hardware and gasket not included • Made in the U.S.A. PART # DESCRIPTION 1009-0261 For 22 FXLRST, 20-22 FXLRS, 18-22 FLHC/FLHCS/FLFB/FLFBS, 18-21 FLSB, 18-20 FLDE/FXLR 1009-0262 For 18-22 FXBB/FXBBS/FXST, 18-20 FXDRS, 18-22 FXFB/FXFBS, 18-20 FXBR/FXBRS 1009-0217 For 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLTR/FLTRX (except 23 FLHXSE/FLTRXSE) and 09-24 FLHTCUTG/FLTRT w/ center fuel fill; repl. OEM #s 62908-08, 75069-08D 1009-0216 For 08-24 FLHR/FLHRC/FLHRXS and 15-24 FLRT w/ right side fill; repl. OEM #75076-08B 1009-0218 For 05-07 FLHRS; repl. OEM #s 75227-04, 75227-04A, 75227-06 1009-0212 For 00-07 FLHR/FLHRC/FLHRS w/ right side fuel fill (except 05-07 FLHRS); repl. OEM #s 75127-02, 75127-02A, 75127-02B, 75127-02C, 75127-06 1009-0213 For 00-07 FLHT/FLHX/FLTR w/ center fuel fill; repl. OEM #s 75126-00, 75126-00A, 75126-00B, 75126-02,75126-02A, 75126-02B, 75126-02C, 75126-06, 75126-06A 1009-0221 For 08-17 Softail; repl. OEM #s 75284-08,75284-08A 1009-0214 For 01-07 Softail (except FXSTD); repl. OEM #s 75132-01,75132-01A, 75132-01B, 75132-01C, 75132-01D, 75132-06 1009-0220 For 09-17 FXD/FXDWG, 12-16 FLD; repl. OEM #s 75218-04D, 75219-09 1009-0215 For 04-08 Dyna; repl. OEM #s 75218-04D, 75219-04 1009-0222 For 07-22 XL (except RH Sportster); repl. OEM #s 75284-08, 75284-08A FUEL PUMP ASSEMBLIES • Drop-in replacement fuel pump module – including the housing – with a new fuel pump, strainer, fuel lines, retainer, wire harness, gasket and hardware as required • Economical solution for restoring lost performance or non-performing fuel pump • Pump draws less current than OEM pump while maintaining the same flow rate and working pressure reducing working temperatures and increasing unit life 1107-0777 1107-0776 1009-0222 1009-0261
11 DRAGSPECIALTIES.COM MARCH 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CIRO Ciro’s Gen 2 Bag Blades® are a great way to add custom style and increased visibility to your ride. The LEDs add brilliant additional run/turn/brake light functions for a cool custom look and added visibility when on the road. They install without any drilling required and are set up for direct plug-in installation so wiring is quick and easy. PART # DESCRIPTION FOR 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLTRX/FLTRXSTSE, 25 FLHXU 2040-34591 Standard, red lens w/ red LEDs 2040-34581 Standard, smoke lens w/ red LEDs 2040-3462 Dual-function, red lens 2040-3461 Dual-function, smoke lens GEN 2 BAG BLADES® • Standard lights have red run, turn and brake LEDs • Dual-function lights have amber or red run, turn and brake LEDs (when paired with Lightstrike COMMANDER™) • High-strength polycarbonate lenses available in red or smoke • Increases rear visibility • No drilling requires; pre-applied 3M™ VHB • Standard lights include harness for plug-and-play installation • Dual-function lights are plug-and-play with either Custom Dynamics Plug-N-Play standard harness or Lightstrike COMMANDER PART #2050-0551 (sold separately) • Dual-function lights combined with Lightstrike COMMANDER allow for use of either red or amber turn signals and choice of different modes and animations • Sold in pairs 2040-3461 2040-3459 1 Not compatible with Lightstrike COMMANDER™.
12 MARCH 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 09-25 FLHTCUTG, 20-22 FLHTCUTGSE, 10-11 FLHXXX (EXCEPT 14-25 INTERNATIONAL FLHTCUTG) 2010-1573 Red 2010-1574 Smoke PROBEAM® LOW-PROFILE LED TAILLIGHTS • Advanced LED technology significantly boosts brightness and visibility, ensuring you’re seen from greater distances and wider angles • State-of-the-art LEDs are brighter and more durable than stock incandescent bulbs, offering a longer lifespan and low power draw • Running light pipes wrap towards the taillight edges to improve side visibility for added safety, both day and night • Full contrast brake and turn LEDs illuminate instantly, providing clear signaling to other drivers and demanding attention when braking or turning • Designed and tested for durability against vibration, moisture and harsh road conditions • Simple hassle-free installation; two screws and one connector per taillight with no cutting or splicing required • Sold in pairs NOTE: 20-22 FLHTCUTGSE requires wiring adapter PART #2050-0417 (quantity 2) to install (sold separately). PART # DESCRIPTION FOR 09-25 FLHTCUTG, 20-22 FLHTCUTGSE, 10-11 FLHXXX (EXCEPT 14-25 INTERNATIONAL FLHTCUTG) 2010-1575 Red 2010-1576 Smoke FOR 15-25 FLRT, 23-25 FLTRT 2010-1577 Red 2010-1578 Smoke PROBEAM® LED SQUAREBACK TAILLIGHTS • Advanced LED technology significantly boosts brightness and visibility, ensuring you’re seen from greater distances and wider angles • State-of-the-art LEDs are brighter and more durable than stock incandescent bulbs offering a longer lifespan and low power draw • Running light pipes wrap towards the taillight edges to improve side visibility for added safety, both day and night • Full contrast brake and turn LEDs illuminate instantly, providing clear signaling to other drivers and demanding attention when braking or turning • Designed and tested for durability against vibration, moisture and harsh road conditions • Simple, hassle-free installation; two screws and one connector per taillight with no cutting or splicing required • Sold in pairs 2010-1573 2010-1574 2010-1575 2010-1578
13 DRAGSPECIALTIES.COM MARCH 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR ALL MODELS W/ STANDARD 3-HOLE MOUNTING PATTERN 2030-2465 Chrome 2030-2464 Black CURVED LAYDOWN LICENSE PLATE KITS • Frame is low profile aluminum construction; steel backing plate • Very bright white LED tag light • Frame dimensions: 7-3/ 16” L x 41/ 4” W • Mounting hardware included • Available in chrome or black finish 2030-2464 2030-2465 PART # DESCRIPTION BLACK 0602-1157 6” T 0602-1159 8” T 0602-1161 10” T RAW 0602-1156 6” T 0602-1158 8” T 0602-1160 10” T RISER KITS • Made with 6061-T6 aluminum • 1” clamping area • 3-1/ 2” center-to-center riser spacing • Top clamp and hardware included included • Hardware is 3/ 8-16 thread, 1.5” L • Straight or pullback options • Available with a raw or black finish • Made in the U.S.A. 0602-1159 STRAIGHT RISERS
14 MARCH 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 17-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), H-D FL TRIKE, 16-24 SOFTAIL, 16-17 FXDLS, 14-15 FLSTNSE, 13-15 FXSBSE, 11-12 FLSTSE, 20-23 ELW 0630-3515 Gold anodized 0630-3516 Gunmetal gray 0630-3517 Red anodized FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 0630-3519 Chrome 0630-3518 Black anodized 0630-3520 Gold anodized 0630-3521 Gunmetal gray 0630-3522 Red anodized CONTOUR GRIPS • Super comfortable and stylistic rubber sleeves • Performance Machine logo on end caps • Sold in pairs 0630-3515 0630-3516 0630-3518 0630-3519 0630-3522
15 DRAGSPECIALTIES.COM MARCH 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS BLUE BRONZE GREEN PURPLE FOR 23-25 TOURING MODELS WITH NEW STYLE FAIRING (SEE NOTE ABOUT FITMENT) 0635-2833 0635-2840 0635-2830 0635-2837 FOR 82-25 H-D W/ CABLE CLUTCH (SEE NOTE ABOUT FITMENT) 0635-2834 0635-2841 0635-2831 0635-2838 FOR 02-25 H-D W/ HYDRAULIC CLUTCH (SEE NOTE ABOUT FITMENT) 0635-2835 0635-2842 0635-2832 0635-2839 FLARE® HAND GUARDS • Available in Klock Werks® Kolor finishes to match Flare® Windshields or custom paint schemes • Fits most 82-25 Harley-Davidson models with cable or hydraulic clutch; check fitment details before ordering • Hand Guard material: Kolor finishes are made from acrylic • Hardware Material: Black e-coated aluminum; hardware can be stripped, polished and anodized to color match build components • Easy installation with simple setup and all necessary hardware • Sold in pairs (left and right) • Made in the U.S.A. NOTE: Check Dragspecialties.com website for the specific fitment needed and installation before ordering. Fitment may also vary based on turn signal, handlebar, and windshield setups. NOTE: Clean with gentle solutions like Shine Werks® or mild soapy water. Avoid ammonia, alcohol, or solvent-based cleaners (like Windex®) to preserve tint, coating, and UV protection. If using dish soap, follow with a wax-based cleaner for optimal performance, like Shine Werks, sold separately. NOTE: Does not fit 04-13 XL models without a shim, 04-22 XL models with off-set mirror brackets or with bar end mirrors. Certain handlebar and windshield combinations may have clearance issues. We recommend holding the Hand guards and bracket hardware up to your handlebars to anticipate any contact issues before installation. Contact issues will likely only occur in close quarters/parking scenarios. 0635-2837 0635-2841 0635-2832 0635-2833 0635-2838
16 MARCH 2026 DRAGSPECIALTIES.COM DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION FINISH ATLANTIC HURRICANE LARGO MARLIN W/ DUNLOP AE2 130/60/B21 AND (2) FRONT 12.6” POLISHED ROTORS (TPMS PRE-INSTALLED) 21” x 3.5” For 24-26 FLHX/FLHXU/FLTRX/ FLTRXSTSE, 23-25 FLHXSE/FLTRXSE w/ ABS Chrome 0335-0025 0335-0027 0335-0024 0335-0022 Solid black 0335-0026 - - 0335-0023 PRECISION-CAST 3D FRONT WHEELS WITH DUNLOP TIRES • ”Cast” one-piece design wheels at a fraction of the cost of billet or forged wheels • Features intelligent ABS bearings that are “linked-brake ready”; no ABS system reprogramming required • Front wheels include Dunlop AE2 130/60B21 tire mounted and balanced and two front 12.6” polished Coastal Moto rotors installed on wheel • Front wheels also include one set of front fender relocation brackets LARGO CHROME MARLIN SOLID BLACK HURRICANE CHROME ATLANTIC SOLID BLACK
RkJQdWJsaXNoZXIy NDI5NTY=