THE DRAG SPECIALTIES APRIL 2026 DRAGSPECIALTIES.COM APRIL 2026 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 1800-2756 For 22-25 FXLRST/FLHCS, 22-25 FLHC, 18-21 FLSB 3 ROAD RAGE 2-INTO-1 SYSTEM WITH SUPERBIKE MUFFLER • 2-into-1 headers welded to collector and muffler • Stepped 13/ 4” to 1 7/ 8” headpipes • Utilizes an advanced inner collector for maximum performance • Stainless steel construction • Black finish with black partial heat shields • Hand TIG welding • 18 mm O2 bungs with 12 mm adapters • Megaphone muffler • Made in the U.S.A. PART # DESCRIPTION EMIS* 1800-27481 For 18-25 FXFB/FXFBS/FXBB/FXLRS/FLSL/FXST 3 THE RIPPER 2-INTO-1 SHORT EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M-Eight Softail exhaust systems • Stepped 13/ 4” to 1 7/ 8” headpipes • Fully welded one-piece design • Chrome finish • Full heat shields • Angle cut end cap • 18 mm O2 bungs with 12 mm adapters • Made in the U.S.A. 1 Will fit 22-25 FXLRST/FXRST/FLHC, 18-21 FLSB if exhaust bracket PART #1861-1837 is used.
2 APRIL 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS TRASK PERFORMANCE Unleash the full performance of your M-Eight with a Trask Performance exhaust system. Three news styles are available, all stainless steel, TIG welded and purged with with machined flanges to improve horsepower and torque. All styles also share the Trask DNA - rugged construction, attention to fit/finish and engineered for maximum performance. PART # DESCRIPTION EMIS* FOR 17-25 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2791 Chrome 3 1800-2790 Black 3 PART # DESCRIPTION EMIS* FOR 99-16 FLHT/FLHX/FLHR/FLTR 1800-2787 Chrome 3 1800-2786 Black 3 “BMF” 2-INTO-1 EXHAUST SYSTEMS • Built for riders who demand performance, sound and style in one package • Engineered to deliver maximum horsepower and torque • Deep, throaty rumble • Crafted from premium heat-resistant mild steel for unmatched durability and long-lasting performance •18 mm O2 sensors; kit comes with 18 to 12 mm reducers • Includes heat shields • Made in the U.S.A. NOTE: Will not fit with OEM air cleaner. 1800-2786 1800-2791
3 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 17-25 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2789 Chrome 3 1800-2788 Black 3 PART # DESCRIPTION EMIS* FOR 99-16 FLHT/FLHX/FLHR/FLTR 1800-2785 Chrome 3 1800-2784 Black 3 “UP YOURS” 2-INTO-1 EXHAUST SYSTEMS • Designed for riders who want to be heard as much as they’re seen • Delivers a deep, throaty exhaust tone that commands attention • Precision engineered to optimize airflow • Unlocks improved horsepower and torque • Build from durable, heat and corrosion resistant mild steel • 18 mm O2 sensor ports; kit comes with 18 to 12 mm reducers • Includes heat shields •Made in the U.S.A. NOTE: Will not fit with OEM air cleaner. 1800-2784 1800-2789
4 APRIL 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 25 CHIEFTAIN, 20-25 CHALLENGER: 291/2” L OVERALL (12” L X 12” W FRONT X 10” L X 7” W REAR) 0810-2469 Smooth, solar-reflective leather 0810-2465 Smooth, vinyl 0810-2470 Double diamond, black thread, solar-reflective leather 0810-2466 Double diamond, black thread 0810-2467 Double diamond, red thread 0810-2468 Double diamond, silver thread PREDATOR III 2-UP SEATS • High-quality automotive-grade vinyl cover • PART #s 0810-2469 and 0810-2470 feature solar-reflective leather in the seating area and automotive-grade vinyl on the sides • Features a 61/ 2” tall driver support with unique styling. • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A. 0810-2469 0810-2465 0810-2470 0810-2467 0810-2468 0810-2466
5 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS ARLEN NESS Add style and a custom finishing touch to your M-Eight with 12-point titanium bolt kits from Arlen Ness. Replace the boring stock factory fasteners with the strength, beauty and light weigh of titanium hardware, now available kits for the cam, points and primary covers. DESCRIPTION PART # FRONT RIMS 19” x 3.25” 0201-2655 DESCRIPTION PART # FRONT RIMS (CONT) 21” x 3.5” 0201-2656 DESCRIPTION PART # FRONT/REAR RIM 18” x 5.5” 0201-2654 FORGED BILLET FLATLINE RIMS • CNC machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings • Black anodized finish NOTE: Arlen Ness hub kits must be purchased separately to install (see the 2026 Drag Specialties FatBook). NOTE: 18” x 5.5” front applications also requires separate purchase of Arlen Ness Fat Tire fork boot covers or Fork Tube guards to install (please see FRAMES & SUSPENSION section in the 2026 Drag Specialties FatBook). PART # DESCRIPTION FOR 17-25 TOURING 2401-1728 Polished 2401-1729 Black 2401-1730 Gold PART # DESCRIPTION FOR 18-25 SOFTAIL 2401-1731 Polished 2401-1732 Black 2401-1733 Gold 12-POINT PRIMARY BOLT KITS • CNC machined from solid titanium • Feature a spot drilled bolt head and lightning hole design on the bolt flange • Reduced weight compared to factory and stainless steel hardware • Include all necessary bolts for the outer primary cover PART # DESCRIPTION FOR 17-25 FLHRXS, 24 FLHTK/FLTRK, 17-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 17-25 H-D FL TRIKE, 18-24 SOFTAIL 2401-1734 Polished 2401-1735 Black 2401-1736 Gold 12-POINT CAM COVER AND POINTS COVER BOLT KITS • CNC machined from solid titanium • Feature a spot drilled bolt head and lightning hole design on the bolt flange • Reduced weight compared to factory and stainless steel hardware • Include all necessary bolts for the engine cam cover and points cover 2401-1733 2401-1732 2401-1728 0201-2654 0201-2655 2401-1736 2401-1735 2401-1734
6 APRIL 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FEULING® Feuling® is committed to providing the highest quality performance and replacement engine components with unmatched service and technical support. Their OE+ oil pumps for M-Eight engines deliver improved oil pressure and feature larger pressure and scavenge gerotors to ensure maximum oil flow to your engine, even under extreme use. PART # DESCRIPTION 0932-0319 For 17-25 M-Eight Oil-Cooled motors PART # DESCRIPTION 0932-0320 For 17-25 M-Eight Liquid-Cooled motors OE+ OIL PUMPS FOR M-EIGHT • Competitively priced OE+ product line is an upgraded alternative to stock components • Designed to work with the factory camplate or OE+ camplate PART #09320193; sold separately • Feuling® OE+ stock replacement billet oil pumps deliver increased oil pressure and return scavenge volumes over the factory oil pumps by using larger gerotors and properly sized passages • Will also increase the oil pressure by using a precision machined pressure relief valve which is seated and sealed to a minimum of 30 psi with full pop off at 55 to 65 psi • Larger 2” pressure gerotors • Larger 2.25” scavenge gerotors • Billet 6061 aluminum construction • Made in the U.S.A. 0932-0319 0932-0320 PART # DESCRIPTION FOR 17-25 M-EIGHT 0940-2241 Chrome 0940-2242 Black PART # DESCRIPTION FOR 99-17 TWIM CAM 0940-2240 CHROME 0940-2239 Black LIFTER BLOCK COVERS • Billet 6061 aluminum construction • Includes front/rear covers, gaskets and stainless ARP® hardware • Made in the U.S.A. 0940-2239 0940-2241
7 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* W/ CHAIN DRIVE CAM 0904-0181 Wrinkle black w/ highlighted fins and black pushrod tubes 3 0904-0180 Wrinkle black w/o highlighted fins and black pushrod tubes 3 PART # DESCRIPTION EMIS* W/ GEAR DRIVE CAM 0904-0184 Wrinkle black w/ highlighted fins and black pushrod tubes 3 0904-0183 Wrinkle black w/o highlighted fins and black pushrod tubes 3 129” POWER PACKAGES FOR M-EIGHT • Big-bore bolt-on kit increases your 107” M-Eight to 129” with no case machining required • 4.32” bore cylinders with 11:1 forged pistons • S&S oil pump/cam plate with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screen in both scavenge pickups • Magnet in cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the oil feed and scavenge side • Adjustable pressure relief valve can be adjusted with the unit installed in the engine • Quickee pushrods with black pushrod tubes • S&S premium tappets • S&S hard-anodized, black coated tappet cuffs are billet aluminum construction • Improve tappet stability in high-lift, high-rpm situations • S&S 496 cams designed for big bore applications • S&S high-performance conical single-wire design valve springs • All necessary gaskets, bearings and hardware for bolt-on installation included • Made in the U.S.A. 0904-0181 129” POWER PACKAGES FOR M-EIGHT continued on next page. FOR 17-25 M-EIGHT OIL-COOLED 107” ENGINES
8 APRIL 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0931-1213 For 17-25 M-Eight Gen. 1 and Gen. 2 motors (4.25” bore, 4.375” stroke; 124” and 128” applications) REPLACEMENT CYLINDERS • OEM black texture powdercoat with highlighted fins • Excellent for stock replacement • Cylinders are finished slightly undersized so they may be finish-honed to fit your pistons • The fin design adopts the second generation M-Eight motor style to match the Center-Cooled type cylinders and throttle body • Sold in pairs PART # DESCRIPTION 1131-4051 For 90-97 Big Twin w/ Scorpion billet clutch PART #1130-0436 1131-4052 For 91-22 XL (except RH Sportster), 94-02 Buell (except Blast) w/ Scorpion billet clutch PART #DS-223470 SCORPION CLUTCH PLATE KITS • Kits include aramid friction and steel plates • Made in the U.S.A. 1131-4051 129” POWER PACKAGES FOR M-EIGHT (CONT) 0904-0183
9 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLTRX/FLTRXSTSE, 23-25 FLTRXSE 2040-3479 Chrome PART # DESCRIPTION FOR 24-25 FLTRX/FLTRXSTSE, 23-25 FLTRXSE (CONT) 2040-3480 Black GOAT-E™ LIGHT • Sits just below headlight and designed to work with the OEM batwing fairing • Bold, goatee-inspired look • Bright white LED running light and amber turn signals • Available in chrome or black • Plug-and-play installation PART # DESCRIPTION 2050-0591 For 25 FLFB/FXBB/FXBR MAGIC STROBES™ BRAKE LIGHT FLASHER • Instantly boost your safety by adding flashing and strobe patterns to your brake lights • Easy plug-and-play installation under the seat into existing wire harness • Ten unique user-selectable flash and strobe patterns • Quickly switch between patterns with dial control PART # DESCRIPTION 2050-0589 For 23-25 FLTRXSE, 24-25 FLTRX/FLTRXSTSE FRONT TURN SIGNAL EQUALIZER MODULE • Ensures motorcycle’s front turn signal circuits maintain the correct electrical load • Helps prevent unwanted diagnostic trouble codes or Body Control Module (BCM) warning messages on dash • Designed to work with Custom Dynamic’s Shark Demon® 2 Road Glide headlight kits PART #s 2001-3046 and 2001-3047 (sold separately) • Plug-and-play installation with existing harness 2040-3479 2040-3480
10 APRIL 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2120-1517 For 25 FLHXU, 24 FLTRK, 24-25 FLHX/FLTRX/FLTRXSTSE/FLTRXP, 23-25 FLHXSE/FLTRXSE WIRELESS APPLE CARPLAY HEADSET BYPASS • Designed for use with Skyline infotainment system • Allows CarPlay to activate (wirelessly or with phone cable) and play through the audio system speakers when connected to the infotainment system • Pairs to the factory radio like other Bluetooth® devices • Installs under the seat • Connects to the 12-pin male P&A connector • Direct plug-in installation; no wire cutting/splicing needed • Made in the U.S.A. PART # DESCRIPTION 2120-1518 For 24-25 FLTRX/FLTRXSTSE, 24 FLTRK, 23-25 FLTRXSE FRONT TURN SIGNAL TAP HARNESS • Used for adding additional front turn signals • Pigtail connects between existing front headlight/turn signal connector and back of the LED headlight • Color-matching wire with connectors are preinstalled • Plug-and-play • Made in the U.S.A. PART # DESCRIPTION 2120-1519 Universal dash trim DASH TRIM • Extra-flexible EPDM 1/ 16” thick material • Available in 4’ lengths • Universal fit, trim to length • Black • Made in the U.S.A. PART # DESCRIPTION 2010-1579 For 19-25 Indian Touring models w/ center taillight TRAILER ISOLATOR • Protects factory turn signal module from being overloaded when adding a trailer • 4-wire connection • Plugs in between the rear fender harness and receives the signals from the lighting circuits • Draws power from the motorcycle battery • Made in the U.S.A. PART # DESCRIPTION 2120-1520 For 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLTRX/FLTRXSTSE; repl. OEM #69203216 DAYMAKER® FOG LAMP WIRING HARNESS • Allows easy hookup to the existing wiring harness • Requires no wire cutting/splicing • Made in the U.S.A.
11 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION WIDTH HEIGHT RISE CLAMP AREA WIDTH SWEEP CONTROL LENGTH 0601-7056 Mid 31.65” 3.74” 2.32” 5.9” 2.2” 7.87” 0601-7055 High 31.65” 4.72” 3.3” 5.9” 2.2” 7.87” 1” V-TWIN HANDLEBARS • Specifically designed for H-D V-Twin models • 1” diameter center clamping area with 1” control ends • Comes slotted for internal wiring and notched for early-style H-D Throttle-By-Wire (TBW) • Black finish in medium and high options NOTE: Will not fit 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE and 25 Softail models. 0601-7055 0601-7056 PART # DESCRIPTION BLACK 0602-1254 2.5” T 0602-1256 3.5” T PART # DESCRIPTION RAW 0602-1253 2.5” T 0602-1255 3.5” T RACE RISER KITS • Made from 6061-T6 aluminum • 1” clamping area • Top clamps and hardware included • Hardware is 3/ 8”-16 x 1.5” L • Available with a raw or black finish •Made in the U.S.A. 0602-1253 0602-1256 PART # DESCRIPTION FOR 15-23 FLTRX/FLTRU/FLTRK 0602-1154 Black 0602-1155 Raw RISER ADAPTERS • Made from 6061-T6 aluminum • Allows mounting of tall risers or T-Bars while maintaining the stock gauge module location • Replaces the existing riser and clamp, mounts with existing hardware • 3 1/ 2” on-center with 1/ 2” riser mounting holes • Available in a raw or black finish • Made in the USA NOTE: Gauge mounting cover must be modified to allow riser/T-Bar mounting. NOTE: Will require relocation of ignition switch or ignition delete with CVO flash. 0602-1155 0602-1154
12 APRIL 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS ICE FLARE® BLUE ICE PINK ICE FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 25 FLHXU/FLTRXRRSE, 23-25 FLHXSE/FLTRXSE - 0635-2806 FOR 14-20 FLHT/FLHX/FLHR/FLTR, 14-20 FLHTCUTG/FLRT, 03-20 CVO TOURING/SOFTAIL/DYNA, 16-17 FLSS/FLSTFBS, 02-17 V-ROD W/ HYDRAULIC CLUTCH 0635-2819 0635-2807 FOR 21-25 FLHT/FLHX/FLHR/FLTRX, 99-13 FLHT/FLHX/FLHR/FLTR, 09-13, 21-25 FLHTCUTG/FLHXXX/FLRT/FLTRT, 00-25 SOFTAIL, 99-17 FXD/FXDWG, 86-22 XL (SEE NOTE) W/ CABLE CLUTCH 0635-2820 0635-2808 KOLOR FLARE® ORANGE RED YELLOW FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 25 FLHXU/FLTRXRRSE, 23-25 FLHXSE/FLTRXSE 0635-2824 0635-2821 0635-2827 FOR 14-20 FLHT/FLHX/FLHR/FLTR, 14-20 FLHTCUTG/FLRT, 03-20 CVO TOURING/SOFTAIL/DYNA, 16-17 FLSS/FLSTFBS, 02-17 V-ROD W/ HYDRAULIC CLUTCH 0635-2825 0635-2822 0635-2828 FOR 21-25 FLHT/FLHX/FLHR/FLTRX, 99-13 FLHT/FLHX/FLHR/FLTR, 09-13, 21-25 FLHTCUTG/FLHXXX/FLRT/FLTRT, 00-25 SOFTAIL, 99-17 FXD/FXDWG, 86-22 XL (SEE NOTE) W/ CABLE CLUTCH 0635-2826 0635-2823 0635-2829 FLARE® HAND GUARDS • Available in Klock Werks® Kolor finishes to match Flare® Windshields or custom paint schemes • Fits most 82-25 Harley-Davidson models with cable or hydraulic clutch; check fitment details before ordering • Hand Guard material: Kolor finishes are made from acrylic, Ice Kolor finishes are also made from acrylic and feature a vibrant fluorescent edge to give your motorcycle a little extra pop • Hardware Material: Black e-coated aluminum; hardware can be stripped, polished and anodized to color match build components • Easy installation with simple setup and all necessary hardware • Sold in pairs (left and right) • Made in the U.S.A. NOTE: Check Dragspecialties.com website for the specific fitment needed and installation before ordering. Fitment may also vary based on turn signal, handlebar, and windshield setups. 0635-2806 0635-2807 0635-2829 0635-2824 0635-2822 NOTE: Clean with gentle solutions like Shine Werks® or mild soapy water. Avoid ammonia, alcohol, or solvent-based cleaners (like Windex®) to preserve tint, coating, and UV protection. If using dish soap, follow with a wax-based cleaner for optimal performance, like Shine Werks, sold separately. NOTE: Does not fit 04-13 XL models without a shim, 04-22 XL models with off-set mirror brackets or with bar end mirrors. Certain handlebar and windshield combinations may have clearance issues. We recommend holding the Hand guards and bracket hardware up to your handlebars to anticipate any contact issues before installation. Contact issues will likely only occur in close quarters/parking scenarios.
13 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 25 FLFB/FLHC/FXBB/FXBR/FXLRS/FXLRST 0630-3528 Black/matte black 0630-3531 Graphite/gunmetal 0630-3533 Light brown/black VANS® V-TWIN LOCK-ON™ GRIPS • The Vans® V-Twin Lock-On™ Grip System features the classic Vans waffle sole pattern and is built to deliver an amazing riding experience • 100% slip-free performance guaranteed • In-molded throttle tube with integrated application-specific throttle actuation • Billet aluminum Lock-On style clutch side clamp eliminates the need for 0630-3531 0630-3533 0630-3528 grip glue or safety setscrews, providing simple installation and removal • T15 Torx bolts provide extra secure clamping for solid, twist-free mounting • Proprietary medium-compound durometer improves overall comfort and durability • 130 mm overall grip length with flange • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 2210-0702 For 14-23 FLHX/FLHT/FLTRX/FLTRU/FLTRK/FLHTCUTG/FLTRT (except 23 FLHXSE/FLTRXSE) HD-03X TFT GAUGE SET • Features smartphone integration that gives you full control of your dashboard directly from your device • Connect your gauges to your phone with the KOSO® K Link™ app and monitor real-time data: speed, fuel level, oil temperature, gear indicator, RPM, best performance, horsepower, tire pressure, location tracking, diagnostic information and more • Match your motorcycle’s style by instantly changing between analog-style and digital interfaces • Seven different backlight colors • Include multifunction speedometer, tachometer, odometer, volt meter, air suspension meter, gear indicator, trip meter, engine temperature, oil temperature and fuel level gauges • Indicator lights for oil, engine warning, warning light, high beam, fog light, voltage, anti-theft, cruise, ABS and turn signals • Optional air pressure sensor (PART # 2212-0901) for models equipped with air suspension is available separately NOTE: On CVO models the run/stop switch must be in the ON position to change settings on the display.
14 APRIL 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION FINISH DAYTONA FRONT WHEEL W/ DUNLOP AE2 130/60/B21 AND TWO 11.8” POLISHED ROTORS (TPMS COMPATIBLE) 21” x 3.5” for 24 FLHTK/FLTRK, 17-24 FLHRXS, 08-23 FLHT/FLHR/FLHX/FLTR (except 23 FLHXSE/FLTRXSE), 09-25 H-D FL Trike w/ ABS Chrome 0335-00311 Black cut 0335-00331 Solid black 0335-00321 DESCRIPTION FINISH DAYTONA REAR WHEEL W/ DUNLOP AE2 180/55/B18 (TPMS COMPATIBLE) 18” x 5.5” For 09-25 FLHT/FLHR/FLHX/FLHXU/FLTR/FLTRX/FLTRU/FLTRK w/ ABS Chrome 0336-0040 Black cut 0336-0042 Solid black 0336-0041 REAR WHEEL W/ DUNLOP AE2 180/55/B18 (TPMS PRE-INSTALLED) 18” x 5.5” For 09-25 FLHT/FLHR/FLHX/FLHXU/FLTR/FLTRX/FLTRU/FLTRK w/ ABS Chrome 0336-0037 Black cut 0336-0039 Solid black 0336-0038 PRECISION-CAST 3D WHEELS WITH DUNLOP TIRES • ”Cast” one-piece design wheels at a fraction of the cost of billet or forged wheels • ABS style features intelligent ABS bearings that are “linked-brake ready”; no ABS system reprogramming required • Front wheels include Dunlop AE2 130/60B21 tire mounted and balanced and two 11.8” polished Coastal Moto rotors installed on wheel • Front wheels also include one set of front fender relocation brackets for 14-newer models • Rear wheels include Dunlop AE2 180/55B18 tire mounted and balanced 0335-0031 0336-0039 0336-0041 1 FLHXST/FLTRXST/FLRT models require fender bracket PART #1410-0170.
15 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION M-EIGHT SOFTAIL/ELW/PAN AMERICA DRIVER FOOTPEGS 1620-2777 Chrome 1620-2773 Black 1620-2776 Gold 1620-2775 RED PART # DESCRIPTION M-EIGHT SOFTAIL/ELW/PAN AMERICA PASSENGER FOOTPEGS 1620-2781 Chrome 1620-2778 Black 1620-2780 Gold 1620-2779 Red AGGRESSOR FOOTPEGS • Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek design • Aircraft-grade 6061 billet aluminum construction • Feature 12 cone-shaped stainless steel cleats per footpeg • Cutaway design for increased ground clearance • Aluminum clevis • Dimensions: 2.25” L x 3.5” W • Sold in pairs PART # DESCRIPTION FOR 84-25 FLT/FLHT/FLHR/FLHX/FLTR/FLTRU (EXCEPT 04-07 FLHRS), L87-17 FLST/FLSTF/FLSTN, 12-16 FLD, AND 99-25 H-D FL TRIKE 1611-0108 Chrome 1611-0105 Black PART # DESCRIPTION FOR 84-25 FLT/FLHT/FLHR/FLHX/FLTR/FLTRU (EXCEPT 04-07 FLHRS), L87-17 FLST/FLSTF/FLSTN, 12-16 FLD, AND 99-25 H-D FL TRIKE 1611-0107 Gold 1611-0106 Red AGGRESSOR BRAKE PEDAL PADS • Aircraft-grade 6061 billet aluminum construction • Feature 14 cone-shaped stainless steel cleats per pad • Designed to mount to the stock brake arm • Hardware Included • Dimensions: 4.75” L x 2.75” W • Sold each 1611-0105 1611-0106 1611-0107 1611-0108 1620-2780 1620-2778 1620-2775 1620-2777
RkJQdWJsaXNoZXIy NDI5NTY=