11 DRAGSPECIALTIES.COM APRIL 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION WIDTH HEIGHT RISE CLAMP AREA WIDTH SWEEP CONTROL LENGTH 0601-7056 Mid 31.65” 3.74” 2.32” 5.9” 2.2” 7.87” 0601-7055 High 31.65” 4.72” 3.3” 5.9” 2.2” 7.87” 1” V-TWIN HANDLEBARS • Specifically designed for H-D V-Twin models • 1” diameter center clamping area with 1” control ends • Comes slotted for internal wiring and notched for early-style H-D Throttle-By-Wire (TBW) • Black finish in medium and high options NOTE: Will not fit 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE and 25 Softail models. 0601-7055 0601-7056 PART # DESCRIPTION BLACK 0602-1254 2.5” T 0602-1256 3.5” T PART # DESCRIPTION RAW 0602-1253 2.5” T 0602-1255 3.5” T RACE RISER KITS • Made from 6061-T6 aluminum • 1” clamping area • Top clamps and hardware included • Hardware is 3/ 8”-16 x 1.5” L • Available with a raw or black finish •Made in the U.S.A. 0602-1253 0602-1256 PART # DESCRIPTION FOR 15-23 FLTRX/FLTRU/FLTRK 0602-1154 Black 0602-1155 Raw RISER ADAPTERS • Made from 6061-T6 aluminum • Allows mounting of tall risers or T-Bars while maintaining the stock gauge module location • Replaces the existing riser and clamp, mounts with existing hardware • 3 1/ 2” on-center with 1/ 2” riser mounting holes • Available in a raw or black finish • Made in the USA NOTE: Gauge mounting cover must be modified to allow riser/T-Bar mounting. NOTE: Will require relocation of ignition switch or ignition delete with CVO flash. 0602-1155 0602-1154
RkJQdWJsaXNoZXIy NDI5NTY=