THE DRAG SPECIALTIES MAY 2026 DRAGSPECIALTIES.COM MAY 2026 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 25 FXLRST/FLHC 1800-2815 Black/black 3 1800-2814 Polished 3 FOR 18-24 FLHCS, 22-24 FXLRST, 22 FXBB/FXRST, 18-21 FLSB AND 18-21 FLHC 1800-2813 Black/black 3 1800-2812 Polished 3 PART # DESCRIPTION EMIS* FOR 07-17 FXS/FXST/FLS/FLST (EXCEPT 13-17 FXSB/FXSBSE/FXSE AND 09 FXSTSSE) 1800-2817 Black/black 3 1800-2816 Polished 3 ASSAULT 2-INTO-1 EXHAUST SYSTEMS • Made from high-quality stainless steel, mandrel bent, then TIG-welded • Includes custom heat shields with wire tied fasteners for a race-inspired look • Double slip fit and gusset for additional strength • O2 ports included • Made in the U.S.A. 1800-2817 1800-2813 1800-2814 PART # DESCRIPTION EMIS* FOR 04-22 XL (EXCEPT RH SPORTSTER) 1800-2819 Black/black 3 1800-2818 Polished 3 ASSAULT 2-INTO-1 EXHAUST SYSTEMS • Made from high-quality stainless steel, mandrel bent, then TIG-welded • Includes custom heat shields with wire tied fasteners for race-inspired look • Double slip fit and gusset for additional strength • O2 ports included • Made in the U.S.A. 1800-2819 1800-2818
2 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS LEGEND SUSPENSIONS Legend Suspensions uses only pristine, quality materials and components manufactured in America to ensure the highest levels of quality and performance. The company’s Revo-A Air Mono Suspensions for M-Eight Softails are engineered to optimize rider comfort and maximize the suspension performance of your ride. PART # DESCRIPTION 1311-0192 For 25-26 FXBB/FLHC/FLFB/FXBR/FXLRS/FXLRST, 25 FLSTFI LEGEND AIR-A MONO SUSPENSION FOR M-EIGHT SOFTAILS • Legend AIR Suspensions systems set the high mark in ultimate ride quality • Easy installation and alignment, provided by spherical bearings on both top and bottom mounting points • Six external knob adjustments allow fine-tuning of rebound utilizing needle valve technology • Provides optimum rebound performance for any given rider weight, personal ride quality preference, or personal riding style • Light to heavy riders can fine-tune ride preference • Aggressive to casual riding styles can tune to desired quality or personal preference • Exclusive Aramid Fiber air spring technology provides spring rate adjustability • Air spring maximizes wheel travel and adjusts to any desired ride height • Type III hard-coat black anodized machined aluminum bodies • Low friction sealing system and sliding bearings for improved performance and feel • High flow piston reacts quickly for improved fluid flow management • Deflective disc valving self-adjusts to frequency and ensures controlled performance • Internal floating nitrogen piston ensures consistent damping performance • Rider experiences a plush compliant ride with higher bottoming resistance • Easy installation – shock mounts under the seat, replacing stock shock • Includes prewired air compressor with model-specific mounting • Complete wire harness installs with three easy Deutsch connections • Includes black handlebar mounted control for easy “on-the-go” adjustability • Made in the U.S.A.
3 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION STANDARD 1310-2624 12.5” 1310-2626 13” 1310-2628 13.5” HEAVY-DUTY 1310-2625 12.5” 1310-2627 13” REVO-A MONO SUSPENSION FOR M-EIGHT SOFTAIL • Revo-A coil designed specifically for M-Eight Softail models • Available in 12.5”, 13”, and 13.5”, standard or heavy-duty applications • Adjustable preload for rider set up, also allows for minimal pre-load adjustment when changing between rider’s weights and loads • Legend’s touring specific spring rates provide superior ride comfort, improved performance, and increased resistance to bottoming for all day comfort • Features adjustable rebound damping that is specifically designed to make fast, precise, and repeatable changes to ride comfort and performance with a simple turn of a knob • Provides optimum rebound performance that can be fine-tuned for any given rider weight, personal ride preference, or personal riding style • Low friction sleeve bearings both top and bottom for ease of installation, this also allows the shock to float in its mount and avoid shock bind • Hard anodized, 46 mm billet aluminum mono tube design utilizes a lightweight high flow piston design for improved fluid flow resulting in unmatched handling and bike control • Hard chromed shaft is 14% larger for increased strength • Internal floating nitrogen piston ensures consistent damping performance • Deflective disc valving self-adjusts to frequency and ensures controlled performance • Legend’s durable and low friction sealing system and sliding bearings provide improved performance and feel • Available in Black Type III hard coat anodize • Easy installation that utilizes the OEM mounting hardware • Included preload wrench makes adjusting easy • Designed for optimum performance with the Legend Axeo front suspension • Made in the U.S.A. Note: Heavy-Duty application is recommended for 350 lbs. + rider and passenger total weight. Also consider heavy-duty if the majority of your riding is two up with a passenger and/or gear. 1310-2624 1310-2627 FOR 25-26 FXBB/FLHC/FLFB/FXBR/FXLRS/FXLRST, 25 FLSTFI
4 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0810-2475 Smooth, solar-reflective leather 0810-2476 Double diamond, black thread, solar-reflective leather 0810-24711 Smooth, vinyl PART # DESCRIPTION 0810-24721 Double diamond, black thread 0810-24741 Double diamond, red thread 0810-24731 Double diamond, silver thread FREEDOM TOURING 2UP SEATS • Features solar-reflective leather in the seating area and high-quality automotive-grade vinyl on the sides (unless noted) • Sits the driver in about the same position as stock • Features tall driver support with unique styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. 0810-2471 0810-2472 0810-2473 0810-2474 0810-2475 0810-2476 1 Not solar-reflective leather. FOR 20-25 CHALLENGER, 25 CHIEFTAIN; 28” L OVERALL (113/4” L X 131/4” W FRONT) (113/4” L X 101/4” W REAR)
5 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLHR/FLTR/FLTRU/FLTRK/FLTRX (EXCEPT 23 FLHXSE/FLTRXSE) 0801-2205 W/ blue stitching 0801-2206 W/ gray stitching 0801-2211 W/ gold stitching 0801-2207 W/ orange stitching 0801-2208 W/ red stitching 0801-2209 W/ silver stitching 0801-2210 W/ white stitching ROADSOFA™ EXTENDED REACH TRIANGLE GRIPPER SEATS • SaddleGel™ in front and rear reduces tailbone pressure and increases comfort for both driver and passenger • Tall lumbar support and wide driver saddle supports the back and legs for superior comfort • Triangle Gripper seats incorporate gripper material in an eye-catching geometric pattern • Streamlined nose improves the rider’s reach to the ground • Refined split-cushion design separates the seating surface from the lumbar support maximizing touring comfort 0801-2205 0801-2208 0801-2211 0801-2210 • Extended Reach design extends the driver’s seating area a full 2” from the stock seating position • Include driver’s backrest
6 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 25 FLHXU, 25-26 FLHX/FLTRX/FLTRXSTSE, 23-26 FLHXSE/FLTRXSE (14” W FRONT, 13” W REAR) 0801-2289 Black Indy stitch pleated seat FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) (15” W FRONT, 6” W REAR) 0801-2291 Black Indy stitch pleated seat MAVERICK DADDY LONG LEGS SEATS • Comfortable seat that retains a custom look • Designed for the taller rider who needs more room to move back while still giving the passenger comfort • Gives the driver an extra 2” of legroom • Special contours give good support while allowing unrestricted movement PART # DESCRIPTION FOR 25 FLHXU, 25-26 FLHX/FLTRX/FLTRXSTSE, 23-26 FLHXSE/FLTRXSE 0801-2288 Indy stitch pleated seat 0801-2287 Indy stitch pleated Upfront seat FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) 0801-2290 Indy stitch pleated seat MAVERICK SEATS • Comfortable seats that retain a custom look • Special contours give good support while allowing unrestricted movement • 15” of rider comfort and 13.75” of passenger comfort • UpFront seat moves you closer to the handlebars; great for shorter riders • Molded one-piece foam foundation covered with premiumgrade vinyl on a 16-gauge powdercoated steel baseplate • Seat bottom carpeted to protect the fender • Made in the U.S.A. • Deep 15” W rider and 14” W passenger seating areas • Molded one-piece foam foundation covered with premium-grade vinyl on a 16-gauge powdercoated steel baseplate • Seat bottom carpeted to protect the fender • Made in the U.S.A. 0801-2289 0801-2291 0801-2288 0801-2287 0801-2290
7 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FOR SOFTAIL PART # DESCRIPTION FOR 06-10 FXST, 07-17 FLSTF/B (EXCEPT FXSTD/FXSTSSE) 0802-0331 Smooth style seat PART # DESCRIPTION FOR 00-07 FXSTD 0802-0503 Smooth style seat SILHOUETTE SOLO SEATS • Low, sleek style retains back support • Features Le Pera’s sculptured, one-piece molded foam foundation and a top-grade black vinyl cover with a smooth design • Baseplate is powdercoated steel and carpeted for protection • Made in the U.S.A. PART # DESCRIPTION FOR 18-25 FLFB/FLFBS 0802-1487 Diamond stitch pillion pad 0802-1387 White diamond stitch solo seat w/ white piping 0802-1486 Smooth pillion pad 0802-1488 White diamond stitch pillion pad w/ white piping FOR 18-25 FXBB/FXBBS/FXST, 18-21 FLSL 0802-1478 Diamond stitch pillion pad 0802-1477 Smooth pillion pad 0802-1479 White diamond stitch pillion pad FOR 18-25 FXBR/FXBRS/FLFB/FLFBS 0802-1311 Diamond stitch solo seat 0802-1485 White diamond stitch solo seat w/ white piping 0802-1484 Diamond stitch pillion pad 0802-1483 Smooth pillion pad FOR 18-25 FLDE/FLHC/FLHCS 0802-1475 Diamond stitch pillion pad 0802-1474 Smooth pillion pad 0802-1476 White diamond stitch pillion pad FOR 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB 0802-1481 Diamond stitch pillion pad 0802-1480 Smooth pillion pad 0802-1482 White diamond stitch pillion pad PART # DESCRIPTION FOR 16-17 FLS 0802-0936 Smooth solo seat FOR 06-10 FXST, 07-17 FLSTF/B (EXCEPT FXSTD/FXSTSSE) 0802-0329 Smooth solo seat w/ Biker Gel 0802-0550 Smooth pillion pad (7.5” W) 0802-0562 Smooth pillion pad (9” W) FOR 08-17 FLSTC/N 0802-08121 Diamond stitch solo seat 0802-06031 Smooth solo seat 0802-1464 Diamond stitch pillion pad (7” W) FOR 00-07 FXSTD 0802-0502 Smooth solo seat FOR 00-05 FXST AND 00-07 FLST/N (EXCEPT FXSTD, 07 FLSTF) 0802-08151, 2 Diamond stitch solo seat DS-9057181, 2 Smooth solo seat 7808-11261, 2 Smooth solo seat w/ Biker Gel DS9059761, 2 Smooth pillion pad (7” W) 7808-11331, 2 Smooth pillion pad w/ Biker Gel (7” W) BARE BONES SOLO SEATS • Simplistic styling brings out the true expression of your custom or stock bike • Top-grade black vinyl cover • Baseplate is powdercoated steel and carpeted to protect painted surfaces • Available with or without Biker Gel Pad • UpFront is for shorter riders and moves the rider forward • Pillion pad sold separately • Made in the U.S.A. 0802-0503 0802-0331 0802-1387 0802-1479 0802-1484 0802-0936 0802-0562 0802-0812 0802-0502 7808-1126 1 Does not allow reuse of OEM seat rail on FLSTN models. 2 FLSTN models will require removal of luggage rack when using a pillion pad.
8 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS POWER-FLO™ FUEL VALVES • Valves feature a brass body with show-quality chrome-plating, black chrome-plating or Old School Brass finish • Substantially higher fuel flow compared to OEM or aftermarket fuel valve • Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance • Available with 3/ 8” NPT or 22 mm external threads • Adapter nut included on 22 mm threaded valves •Made in the U.S.A. NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the on, reserve and off position of the fuel valve lever. DESCRIPTION 22 MM ROUND 22 MM HEX 3/8” NPT ROUND 3/8” NPT HEX 90° OUTLET FACING FORWARD Grooved DS-390241 - - - Smooth DS-390245 90° OUTLET FACING BACKWARD Smooth - - DS-390255 - 180° OUTLET FACING INWARD (DOWN OUTLET) Smooth - DS-390213 - ROUND SERIES HOSE OUTLET FACING FORWARD HOSE OUTLET FACING INWARD FLAMED SMOOTH IN-LINE CUSTOM FUEL VALVE • Designed with the bike builder in mind • Eliminates the need to worry about fuel valve location • Simple on/off valve without reserve or filter • Made in the U.S.A. POWER-FLO FUEL VALVE WITH 1/ 4” NPT INLET • Hex design with a polished aluminum finish • Universal configuration – can be used in almost any tank location • Can be installed with the hose barb pointing in any direction that leaves the On/Res/Off lever accessible •Made in the U.S.A. PART # DESCRIPTION 0705-0032 In-line fuel valve PART # DESCRIPTION 0705-0098 1/4” NPT, 180° outlet facing inward TANK FITTING KITS FOR FUEL-INJECTION TO CARBURETOR CONVERSION • Use when converting from OEM fuel-injection systems to a carburetor in order to deliver adequate fuel for large-displacement engines • Kit replaces the factory tank fittings, allowing the use of a highquality, high-flow Pingel fuel valve to feed the carburetor • Made of stainless steel • Kit includes adapter and plug or adapter only with O-rings or gaskets PART # DESCRIPTION 0705-0097 For 07-22 XL models (except RH Sportsters); for use w/ any Pingel 1/4” NPT valve • Requires Pingel fuel valves due to tight tolerances in tank fittings (see pages 1228-1229 2026 Fatbook; sold separately) • Made in the U.S.A.
9 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 1020-42971, 2 For 21-25 Touring, 21-25 Softail, 21-24 RA1250/S/ST 2 1020-4298 For 14-20 Touring, 11-20 Softail, 12-17 Dyna, 14-22 XL883/1200, 14-20 XG500/750 2 1020-4299 For 07-13 Touring, 07-10 Softail, 07-11 Dyna, 07-13 XL883/1200 2 FUELPAK X • FPX is more than a tuner, it’s the future of connected riding • With seamless flash tuning, real-time engine data, smart navigation and built-in safety features like theft prevention and crash detection, the FPX transforms your riding experience • Built into the heart of FPX is the all new achievements and challenges experience • Track your performance, get rewards for milestones, and foster head-to-head competition with your friends and other riders worldwide • Made in the U.S.A. 1020-4297 1 Excludes tuning capability 25 Softails. 2 Excludes tuning capability for 23-25 Touring 121” VVT/Hi-Output/water-cooled engines. PART # DESCRIPTION 0401-0122 For 23-25 FLHXSE/FLTRXSE, 24-25 FLTRXSTSE BLACKLINE FRONT FORKS • Complete front fork assemblies • Instant suspension upgrade • Features Öhlins 30 mm NIX damping system • Isolates the compression and rebound damping for enhanced precision and stability • Weight and stress-optimized lower fork leg design • Fork tubes have titanium nitrate lowfriction coating for smooth operation with no stiction • Forks come fully assembled with oil and 12 N/m rate springs (Öhlins PART NO. 08790-12) • 48 mm diameter with 4.606” stroke length • Recommended weight range of 150 lbs. to 500 lbs. max • Sold in pairs
10 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION LC1 SIDE BAGS 3501-1525 Black, left-side mounting 3501-1523 Black/brown, left-side mounting 3501-1526 Black, right-side mounting 3501-1524 Black/brown, right-side mounting PART # DESCRIPTION LC2 SIDE BAGS 3501-1529 Black, left-side mounting 3501-1527 Black/brown, left-side mounting 3501-1530 Black, right-side mounting 3501-1528 Black/brown, right-side mounting PART # DESCRIPTION 3501-1779 Black, for 04-20 XL LEGEND GEAR SIDE BAG SYSTEM • Vintage, lightweight soft luggage design with modern support • Coated canvas sailing material and robust synthetic leather reinforce the bags’ structure • Fiber-reinforced polyamide quick-lock system provides fast and reliable attachment and removal of the bags • LC1 dimensions: 26 cm H x 31 cm W x 14 cm D (10 1/ 4” x 12 1/ 4” x 5 1/ 2”); 9.8 L carrying capacity • LC2 dimensions: 35 cm H x 31 cm W x 14 cm D (13 3/ 4” x 12 1/ 4” x 5 1/ 2”); 13.5 L carrying capacity 3501-1529 3501-1527 • Side bags include side single bag, two waterproof inner bags and all required mounting hardware • Side bag system includes two side bags, two waterproof inner bags and left- and right-side carriers PART # DESCRIPTION 3501-1466 LH1 side bag (right side only) 3501-1869 LH1 side bag (left side only) 3501-1465 LH2 side bag PART # DESCRIPTION 3501-1798 For 17-25 FXFB/S 3501-1800 For 17-25 FXLR, 19-25 FXLRS 3501-1802 For 17-25 FXBB, 20-25 FXST LEGEND GEAR SIDE BAG SYSTEMS • Combines the low weight of a saddlebag with the high form stability of a case • Constructed from weather- and UV-resistant 600D polyester • Reinforced sides and a back panel help bags keep their shape • Can be easily and quickly mounted on to the original attachment points along the fender strut • Features MOLLE attachment system • Integrated anti-theft protection on the inside of the bag • Convenient carrying handle • All bags include waterproof inner bag • Individual bags with mounting hardware also available • LH1 bags dimensions: 42 cm W x 28 cm H x 24 cm D (16.5” x 11” x 9.4”) • LH1 capacity: 19.5 L (5.2 gallon) • LH2 bag dimensions: 47 cm W x 39 cm H x 24 cm D (18.5” x 15.4” x 9.4”) • LH2 capacity: 25.5 L (6.7 gallon) • Side bag systems include one LH1 and one LH2 bags, necessary side carriers, Legend Gear lock set and all required mounting material 3501-1869 3501-1465 SIDE BAG SYSTEM SIDE BAGS SIDE BAG SYSTEMS
11 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE AND 23-25 FLHXSE/FLTRXSE 3501-2080 Chrome 3501-2079 Black SADDLEBAG HINGE COVERS • Remove the cheap looking plastic covers on stock Road Glide and Street Glide saddlebags and replace them with stylish billet aluminum CNC-machined covers • Easy installation • All hardware is included • Sold in pairs 3501-2080 3501-2079 CHROME PART # BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24-25 FLHX, 23-25 FLHXSE (1” DIA. CLAMPING AREA) 0601-6874 0601-6873 4” 31 1/2” 6” 4” FOR MOST 08-25 TBW H-D MODELS (EXCEPT 23-25 FLHX, 23-25 FLHT/FLHTCUTG/FLHXSE AND 25 SOFTAIL) 0601-68721 0601-68711 4” 31 1/2” 6” 4” 0601-68762 0601-68752 4” 31 1/2” 6” 4” FOR 24-25 FLTRX, 23-25 FLTRXSE (1 1/4” DIA. CLAMPING AREA) 0601-6878 0601-6877 4” 31 1/2” 6” 4” 1” TRACKBARS • Drilled and slotted for internal wiring • Made of aluminum • Laser-etched Kodlin Motorcycles logo • Perfect addition to Kodlin Fastback and Ascent risers (sold separately) NOTE: 21-25 FLHT/FLHX/FLHTCUTG models will require modifications to install these bars. NOTE: Not for use with heated grips. 0601-6872 0601-6875 COOLANT RESERVOIR COVERS • Specifically designed to cover that awkward plastic coolant reservoir cover on the left side of the new Touring models • CNC machined from billet aluminum • Black anodized or chrome finish • All hardware included • Very easy installation PART # DESCRIPTION 0932-0314 Chrome 0932-0313 Matte black 0932-0314 0932-0313 1 1” dia. clamping area. 2 1 1/ 4” dia. clamping area. FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE
12 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 2107-0359 Chrome 2107-0358 Black anodized HORN RELOCATION KITS • Specifically designed to replace the “afterthought” stock horn on the left side of the new Touring models • Cover is CNC machined from billet aluminum • Kit includes a replacement horn for relocation under the seat and a wiring harness 2107-0358 2107-0359 PART # DESCRIPTION 1107-0740 For 16-25 Dresser/H-D FL Trike (except 25 FLTRXRRSE), 15 FLHTCUL/ 1107-0741 For 18-25 Softail NXL DERBY COVERS • Ultra high end performance covers • Made from black anodized CNC-machined billet aluminum with brushed stainless steel cover • Comes in a kit and includes all hardware • Aluminum base and stainless cover are easy to customize • Matching floorboards, mini boards, shifter pegs and point cover available separately
13 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS SOLID OUTER COVERS 1010-3452 Chrome finish 3 1010-3450 Black anodized finish 3 FOR 01-17 TWIN CAM DELPHI EFI, 99-06 TWIN CAM CV CARB (EXCEPT 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS) SOLID OUTER COVERS 1010-3448 Chrome finish 3 1010-3446 Black anodized finish 3 CLEAR OUTER COVERS 1010-3447 Black anodized finish 3 SLIM BA AIR CLEANER KITS • Slimmer cage to give riders more right side leg clearance, a comfort feature especially on Dyna models • Slim BA air cleaner cage is 2.375” H • With years of experience designing improved cylinder heads, combustion chambers and intake manifolds, Feuling® brings light to a new bolt-on air cleaner • Developed and designed on the flow bench, and dyno-tested • Impressive horsepower and torque gains on any engine and exceptional gains seen on engines running modified and/or ported cylinder heads along with intakes and larger throttle bodies • One piece design, creates a clean look and eases installation when compared to the industry standard multi stack up construction • Feature lengthened intake runners for increased air velocity, delivering added volume for balanced dynamic flow • High flow billet aluminum velocity stack with optimal opening diameter, outer lip and internal (ID) taper • High flow black washable/reusable air filter with one-piece billet cage • Available with solid or clear outer covers • Optional external race only breather kit PART #1012-0263 allows the air cleaners to be converted from standard intake breathing to external breathers (sold separately on page 692 of the 2026 Drag Specialties FatBook) • Made in the U.S.A. 1010-3452 1010-3446
14 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS 68 MM ASSAULT CHARGE AIR CLEANER • Built for models with larger 68 mm throttle body • Comes with magnetic velocity stack and large-format filter • Billet aluminum backing plate has a concealed integrated breather system with plexiglass outer cover • Supports the airflow needs of high-output M-Eight configurations • Testing shows gains of approximately 8 hp along with improved throttle response and midrange pull • Includes rain sock PART # DESCRIPTION EMIS* FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 1010-3459 Chrome 3 1010-3456 Flat black 3 1010-3458 Gloss black 3 1010-3455 Raw 3 1010-3457 Reverse cut 3 1010-3455 1010-3456 1010-3457 1010-3458 1010-3459
15 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2210-0697 For 14-23 FLHT/FLHX/FLTRX/FLTRU and H-D FL Trike (except 23 FLHXSE/FLTRXSE) D2 MULTI-FUNCTION METER W/ FUEL METER AND OIL TEMPERATURE GAUGES • High-quality plug-and-play meter equipped with eight-color changeable LCD display • Designed to mount in the cutout of the top handlebar clamp for a sleek look (handlebar riser kit w/ gauge cutout or gauge relocation kit may be required depending on application) • Features a tachometer/speedometer combination with a programmable shift light and includes gear indicator • Features vital reads such as engine temperature, battery voltage, tire pressure and a complete system of indicator lights to monitor vital signs on bike • Plugs directly into the stock harness and works directly with CAN bus system • Includes fuel level, and oil temp meter gauges with adapter harness • Display range: 0 to 124 mph • Effective temperature range: -4 to 185 °F • 12VDC battery voltage • Dimensions: 3.4” L x 1.06” W x 2.6” H PART # DESCRIPTION FOR 23-25 FLTRXSE/FLHXSE, 24-25 FLHX/FLTRX/FLTRXSTSE, 25 FLHXU 2001-3095 Clear 2001-3096 Yellow FOR 17-25 FLHR/FLHRXS/FLHT/FLHTCU/FLHTKL/FLHTK (EXCEPT 25 FLHTK), 20-24 FLTRK/ FLTRKSE/FLTRXST/FLHXST, 17-23 FLTRX/FLTRXS/FLHX/FLHXS, 18-22 FLTRXSE, 17-22 FLHXSE, 17-21 FLHTKSE, 17-25 FLHTCUTG/FLTRT/FLHT, 20-22 FLHTCUTGSE, 18-24 SOFTAIL 2001-3087 Clear 2001-3088 Yellow FOR 14-16 FLHX/FLHXS/FLHTK/FLHTKL/FLHTCUL/FLHTKSE/FLHTCUTG/FLRT, 15-16 FLTRX/FLTRXS/FLTRUSE, 11-17 SOFTAIL, 12-17 DYNA, 14-22 XL 2001-3089 Clear 2001-3090 Yellow PART # DESCRIPTION FOR 12-13 FLTRXSE, 11-13 FLTRU, 10-13 FLTRX/FLHTK, 06-13 FLHX/FLHTCUSE, 02-04/07-08/13 FLHRSE, 98-13 FLHRC, 94-13 FLHR/FLHTC/FLHTCU, 10-12 FLHXE, 11 FLTRUSE, 04-07 FLHRS, 98-09 FLTR, 94-96 FLTCU, 95-09 FLHT, 09-13 FLHTCUTG, 10-11 FLHXXX 2001-3091 Clear 2001-3092 Yellow FOR 25 FXBR/FLFBS/FLHC/FXLRS/FXLRST/FXBBS 2001-3093 Clear 2001-3094 Yellow UNIVERSAL; FOR 12VDC SYSTEMS 2001-3097 Clear 2001-3098 Yellow SHARK DEMON® HIGH PERFORMANCE LED FOG LIGHTS • Aggressive industrial styling compliments Shark Demon® headlights with signature fins and exposed screws for a bold mechanical look • Gloss black aluminum housing combines lightweight strength with a sleek, highend finish • Durable polycarbonate lens provides impact and scratch-resistance for maximum protection in rugged riding environments • 4140 raw lumens, 2080 effective lumens per pair • Daylight white clear lens: 5800 to 6500K; crisp, ultra-bright white light for enhanced detail and maximum visibility • Selective yellow lens: 2900 to 3100K; cuts through fog, rain and snow by minimizing glare and boosts contrast 2001-3087 2001-3096 • Adjustable beam directs light exactly where you need it with flexible vertical or horizontal mounting • Includes pair of fog light assemblies and plug-and-play wiring harness • Waterproof to IP67 • SAE/ECE compliant
16 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS BLUE ICE GREEN ICE ORANGE ICE YELLOW ICE FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 25 FLHXU/FLTRXRRSE, 23-25 FLHXSE/FLTRXSE 0635-2818 0635-2815 0635-2809 0635-2812 FOR 14-20 FLHT/FLHX/FLHR/FLTR, 14-20 FLHTCUTG/FLRT, 03-20 CVO TOURING/SOFTAIL/DYNA, 16-17 FLSS/FLSTFBS, 02-17 V-ROD W/ HYDRAULIC CLUTCH - 0635-2816 0635-2810 0635-2813 FOR 21-25 FLHT/FLHX/FLHR/FLTRX, 99-13 FLHT/FLHX/FLHR/FLTR, 09-13, 21-25 FLHTCUTG/FLHXXX/FLRT/FLTRT, 00-25 SOFTAIL, 99-17 FXD/FXDWG, 86-22 XL (SEE NOTE) W/ CABLE CLUTCH - 0635-2817 0635-2811 0635-2814 FLARE® HAND GUARDS • Available in Klock Werks® Ice finishes to match Flare® Windshields or custom paint schemes • Fits most 82-25 Harley-Davidson models with cable or hydraulic clutch; check fitment details before ordering • Hand Guard material: Kolor finishes are made from acrylic, Ice Kolor finishes are also made from acrylic and feature a vibrant fluorescent edge to give your motorcycle a little extra pop • Hardware Material: Black e-coated aluminum; hardware can be stripped, polished and anodized to color match build components • Easy installation with simple setup and all necessary hardware • Sold in pairs (left and right) • Made in the U.S.A. NOTE: Check Dragspecialties.com website for the specific fitment needed and installation before ordering. Fits most 82-26 Harley-Davison Models with cable or hydraulic clutch. Fitment is subject to the variants such as turn signal, handlebar, and windshield configurations. See specific fitment disclaimers: 82-26 H-D models with cable clutch, 02-20 H-D models with hydraulic clutch, 23-26 H-D Touring models. NOTE: Clean with gentle solutions like Shine Werks® or mild soapy water. Avoid ammonia, alcohol, or solvent-based cleaners (like Windex®) to preserve tint, coating, and UV protection. If using dish soap, follow with a wax-based cleaner for optimal performance, like Shine Werks, sold separately. NOTE: Does not fit 04-13 XL models without a shim, 04-22 XL models with off-set mirror brackets or with bar end mirrors. Certain handlebar and windshield combinations may have clearance issues. We recommend holding the Hand guards and bracket hardware up to your handlebars to anticipate any contact issues before installation. Contact issues will likely only occur in close quarters/parking scenarios. 0635-2811 0635-2812 0635-2818 0635-2816 ICE FLARE®
17 DRAGSPECIALTIES.COM MAY 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 17-26 FLHT/FLHX/FLTR/FLHR, 17-25 H-D FL TRIKE, 18-26 SOFTAIL, 16-17 FLSS/FLSTFBS, 13-17 FXSB, 07-12/16-17 FLST/C, 07-12/14-15 FXST, 08-11 FXCW/C, 07-10 FXSTB/C 2401-1818 Polished 2401-1819 Black 2401-1820 Gold FOR 07-16 FLHT/FLHX/FLTR/FLHR, 07-17 FLSTF/FLSTN, 11-17 FLSTFB, 12-15 FXS/FLS 2401-1821 Polished 2401-1822 Black 2401-1823 Gold 12-POINT TRANSMISSION TRAP DOOR BOLT KITS • CNC machined from solid titanium • Spot drilled on the bolt head for a radius top and features a lightning hole design on the integrated bolt flange • Reduced weight compared to factory or stainless steel hardware • Include all mounting hardware for the transmission trap door PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE, 25 SOFTAIL 2401-1808 Polished 2401-1809 Black 2401-1810 Gold FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 07-13/21-23 FLHT/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 07-16/21-25 FLHR, 09-13/21-25 H-D FL TRIKE, 07-24 SOFTAIL (EXCEPT FLSS/FLSTFBS), 06-17 DYNA W/ CABLE CLUTCH 2401-1811 Polished 2401-1813 Black 2401-1814 Gold FOR 14-20 FLHT/FLHX/FLTR, 17-20 FLHR, 14-20 H-D FL TRIKE W/ HYDRAULIC CLUTCH 2401-1815 Polished 2401-1816 Black 2401-1817 Gold 12-POINT TRANSMISSION SIDE COVER BOLT KITS • CNC machined from solid titanium and heat treated for strength • Spot drilled on the bolt head for a radius top and features a lightning hole design on the integrated bolt flange • Reduced weight compared to factory or stainless steel hardware • Include all necessary bolts for the transmission side cover 2401-1817 2401-1813 2401-1808 2401-1822 2401-1818 2401-1820
RkJQdWJsaXNoZXIy NDI5NTY=