8 MAY 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS POWER-FLO™ FUEL VALVES • Valves feature a brass body with show-quality chrome-plating, black chrome-plating or Old School Brass finish • Substantially higher fuel flow compared to OEM or aftermarket fuel valve • Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance • Available with 3/ 8” NPT or 22 mm external threads • Adapter nut included on 22 mm threaded valves •Made in the U.S.A. NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the on, reserve and off position of the fuel valve lever. DESCRIPTION 22 MM ROUND 22 MM HEX 3/8” NPT ROUND 3/8” NPT HEX 90° OUTLET FACING FORWARD Grooved DS-390241 - - - Smooth DS-390245 90° OUTLET FACING BACKWARD Smooth - - DS-390255 - 180° OUTLET FACING INWARD (DOWN OUTLET) Smooth - DS-390213 - ROUND SERIES HOSE OUTLET FACING FORWARD HOSE OUTLET FACING INWARD FLAMED SMOOTH IN-LINE CUSTOM FUEL VALVE • Designed with the bike builder in mind • Eliminates the need to worry about fuel valve location • Simple on/off valve without reserve or filter • Made in the U.S.A. POWER-FLO FUEL VALVE WITH 1/ 4” NPT INLET • Hex design with a polished aluminum finish • Universal configuration – can be used in almost any tank location • Can be installed with the hose barb pointing in any direction that leaves the On/Res/Off lever accessible •Made in the U.S.A. PART # DESCRIPTION 0705-0032 In-line fuel valve PART # DESCRIPTION 0705-0098 1/4” NPT, 180° outlet facing inward TANK FITTING KITS FOR FUEL-INJECTION TO CARBURETOR CONVERSION • Use when converting from OEM fuel-injection systems to a carburetor in order to deliver adequate fuel for large-displacement engines • Kit replaces the factory tank fittings, allowing the use of a highquality, high-flow Pingel fuel valve to feed the carburetor • Made of stainless steel • Kit includes adapter and plug or adapter only with O-rings or gaskets PART # DESCRIPTION 0705-0097 For 07-22 XL models (except RH Sportsters); for use w/ any Pingel 1/4” NPT valve • Requires Pingel fuel valves due to tight tolerances in tank fittings (see pages 1228-1229 2026 Fatbook; sold separately) • Made in the U.S.A.
RkJQdWJsaXNoZXIy NDI5NTY=