THE DRAG SPECIALTIES JUNE 2026 DRAGSPECIALTIES.COM JUNE 2026 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 23-25 FLHXSE/FLTRXSE, 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE 1800-2801 Black/black 3 1800-2800 Polished 3 FOR 99-00 FXR 1800-2807 Black/black 3 1800-2806 Polished 3 FOR 06-17 FXD/FXDWG W/ MID OR FORWARD CONTROLS (EXCEPT FLD) 1800-2803 Black/black 3 1800-2802 Polished 3 FOR 91-05 FXD/FXDWG W/ MID OR FORWARD CONTROLS 1800-2805 Black/black 3 1800-2804 Polished 3 ASSAULT 2-INTO-1 EXHAUST SYSTEMS • Made from high-quality stainless steel, mandrel bent, then TIG-welded • Includes custom heat shields with wire tied fasteners • Double slip fit and gusset for additional strength • 18 mm O2 ports included • Made in the U.S.A. 1800-2801 1800-2803 1800-2804 1800-2806
2 JUNE 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLHR/FLTR/FLTRU/ FLTRK/FLTRX/ (EXCEPT 23 FLHXSE/FLTRXSE) 0801-2264 W/ gray stitching 0801-2265 W/ orange stitching 0801-2266 W/ red stitching EXTENDED REACH ROADSOFA™ DS SEATS • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive density foam and GelCore™ inserts for superior driver and passenger comfort • Dragon Scale (DS) seats showcase intricate scallop design • Extend the driver’s seating area by a full 2” • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead • Made in the U.S.A. DELUXE TOURING SOLO SEATS WITH BACKREST • Seat pattern features an eye-catching carbon fiber inlay • Driver’s backrest is fully adjustable and removable • Bucket-style saddle positions the rider comfortably in the seat for a more controlled ride • Mustang’s own proprietary controlled-density foam formula requires no break-in and retains it’s shape and support for years of durable, reliable comfort • Marine-grade fiberglass seat baseplate with polyurethane seat bumpers to absorb vibration • High-quality expanded vinyl seat cover has the appearance of leather but is more durable to withstand the elements • See page 368 of the 2026 Drag Specialties FatBook for optional matching passenger seats available (sold separately) 0801-2326 0801-2327 0801-2266 0801-2265 PART # DESCRIPTION FOR 24-26 FLHX/FLHXU/FLHXL/FLTRX/FLTRXL/FLTRXSTSE, 23-26 FLHXSE, 23-25 FLTRXSE (14” W DRIVER’S SEAT AREA) 0801-2327 W/ American Beauty stitching 0801-2326 W/ black stitching
3 DRAGSPECIALTIES.COM JUNE 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FOR DRESSER/TOURING PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-1705 Basket weave seat 0801-1706 Double diamond seat 0801-1848 Double diamond seat w/ burnt orange thread 0801-1846 Cordova seat 0801-1709 Pleated seat w/ Gripp tape FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/ FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1314 Basket weave seat TAILWHIP SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. 0801-1846 0801-1848 0801-1455 0801-1536 0801-1314 0801-1541 0801-1535 0801-1709 PART # DESCRIPTION FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/ FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) (CONT) 0801-1315 Double diamond seat 0801-1535 Double diamond seat w/ chestnut thread 0801-1541 Double diamond seat w/ Gripp tape 0801-1536 Double diamond seat w/ red thread FOR 99-07 FLHT/FLHR/FLHX/FLTR 0801-1455 Double diamond seat
4 JUNE 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FOR DRESSER/TOURING PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-1852 Cordova seat 0801-1853 Double diamond seat 0801-1855 Double diamond seat w/ burnt orange thread FOR 24-25 FLHRXS, 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/ 0801-1437 Basket weave seat FOR 24-25 FLHRXS, 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHRS/FLHX/ 0801-1438 Double diamond seat 0801-1700 Double diamond seat w/ chestnut thread 0801-1537 Double diamond seat w/ red thread 0801-1439 Pleated seat TAILWHIP DADDY LONG LEGS SEATS • Rider’s seating area is moved 2” back over the standard Tailwhip, providing extra legroom • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • Biker Tec custom cover •Highly detailed powdercoated steel carpeted base •Made in the U.S.A. 0801-1852 0801-1855 0801-1437 0801-1438 0801-1439 0801-1537 0801-1700
5 DRAGSPECIALTIES.COM JUNE 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 93-99 EVOLUTION BIG TWIN W/ CV CARB SOLID OUTER COVERS 1010-3444 Chrome finish w/ black filter 3 1010-3441 Black anodized finish w/ black filter 3 PART # DESCRIPTION EMIS* CLEAR OUTER COVERS 1010-3443 Black anodized finish w/ black filter 3 SLIM BA AIR CLEANER KITS • Slimmer cage to give riders more right side leg clearance, a comfort feature especially on Dyna models • Slim BA air cleaner cage is 2.375” H • With years of experience designing improved cylinder heads, combustion chambers and intake manifolds, Feuling® brings light to a new bolt-on air cleaner • Developed and designed on the flow bench, and dyno-tested • Impressive horsepower and torque gains on any engine and exceptional gains seen on engines running modified and/or ported cylinder heads along with intakes and larger throttle bodies • One piece design, creates a clean look and eases installation when compared to the industry standard multi stack up construction • Feature lengthened intake runners for increased air velocity, delivering added volume for balanced dynamic flow • High flow billet aluminum velocity stack with optimal opening diameter, outer lip and internal (ID) taper • High flow washable/reusable 1.775” H air filter with one-piece billet cage • Available with solid or clear outer covers • Optional external race only breather kit PART #1012-0263 allows the air cleaners to be converted from standard intake breathing to external breathers (sold separately on page 692 of the 2026 Drag Specialties FatBook) • Made in the U.S.A. NOTE: 93-99 Evolution Big Twin models (head breather, 1/2”-13 breather bolts). Only compatible with H-D CV carburetors or Mikuni HSR42/45 with CV airbox adapter. Will not fit 86-earlier Keihin Butterfly carburetors or S&S carburetors. 1010-3433 1010-3436 1010-3443 1010-3444 PART # DESCRIPTION FOR 08-25 FLHT/FLHR/FLHX/FLTRX/FLTRU (EXCEPT 24-25 FLHX/FLHXU/FLTRX, 23-25 FLHXSE/FLTRXSE/FLTRXSTSE), 09-13/19-25 H-D FL TRIKE, 06-25 SOFTAIL (EXCEPT SPRINGER), 06-17 DYNA, 14-22 XL (EXCEPT RH SPORTSTER) W/ 14” ROTORS 1701-0826 Left caliper, chrome 1701-0828 Right caliper, chrome 1701-0825 Left caliper, black 1701-0827 Right caliper, black FOR 08-25 FLHT/FLHR/FLHX/FLHXU/FLTRX/FLTRU (EXCEPT 23-25 FLHXSE/FLTRXSE/FLTRXSTSE), 09-13/19-25 H-D FL TRIKE, 06-25 SOFTAIL (EXCEPT SPRINGER), 06-17 DYNA, 14-22 XL (EXCEPT RH SPORTSTER) W/ 11.8”/12.6” ROTORS 1701-0830 Left caliper, chrome 1701-0832 Right caliper, chrome 1701-0829 Left caliper, black 1701-0831 Right caliper, black SIX-PISTON AXIAL MOUNT FRONT BRAKE CALIPERS • One-piece Monoblock design CNC machined from a single piece of aerospace grade billet aluminum to eliminate flex points and increase hydraulic efficiency • Differential bore: six pistons with optimized diameters ensure balanced pad pressure and improved linear braking feel • Optimized hydraulic architecture: internal routing promotes consistent clamping force under high-load conditions and single piece design eliminates the chance of leaks associated with two-piece calipers • Advanced thermal management: sculpted body with integrated cooling fins improves heat dissipation and reduces fade • Compatible with ABS or non-ABS applications • Work with 11.8”, 12.6” and 14” brake rotors • Include bleeder screw, banjo bolt and high-performance sintered brake pads with dual relief slots for enhanced heat evacuation and debris clearing 1701-0829 1701-0826
6 JUNE 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS ROAD WARRIOR GLOVES • Full grain leather glove for going our way on the highway SIZE (A) BLACK (B) TAN XXS 3301-5164 XS 3301-5165 3301-5172 S 3301-5166 3301-5173 M 3301-5167 3301-5174 L 3301-5168 3301-5175 XL 3301-5169 3301-5176 2X 3301-5170 3301-5177 SIZE (A) BLACK XS 3301-5396 S 3301-5397 M 3301-5398 L 3301-5399 XL 3301-5400 2X 3301-5401 THE RIG GLOVE LEATHER BLACK • Full grain leather, loose fit for cruising.
7 DRAGSPECIALTIES.COM JUNE 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CUSTOM DYNAMICS Give your bike a ‘smart’ lighting upgrade with the Smart Triple Play® module from Custom Dynamics. These modules convert rear turn signals to run/turn/brake lights. The module allows you to select from 10 different brake light strobe/flash pattern (or no flash) and set the intensity level of the lights to match the center taillight. The module has a slim, weathertight design so it is easy to fit and wire up. PART NO. DESCRIPTION 2050-0596 For 23 FLHFB, 22-23 FLHXST/FLTRXST, 19-22 FLHT, 15 FLTRUSE, 14-25 FLHP/FLHTP, 14-22 FLHR, 14-15 FLHTKSE 2050-0598 For 99-13 FLHTP/FLHTCU, 00-13 FLHTC, 06-13 FLHTCUSE, 10-13 FLHTK, 99-09 FLHT, 04-05 FLHTCSE, 06-09 FLHX, 99-09 FLTR, 11-13 FLTRU, 11 FLTRUSE, 00-01 FLTRSE, 99-13 FLHR/FLHRC/FLHP, 04-07 FLHRS, 02-03/07-08 FLHRSE, 11-17 FLSTN/FLSTF/FLSTFB/FLSTC, 00-10 FLSTFB/FLSTF/FLSTC, 11 FLSTSB, 06-10 FLST, 08-10 FLSTSB, 06-07 FLSTSC, 05-10 FLSTN, 05-06 FLSTFSE, 05 FLSTSC, 00-03 FLSTS, 00-10 FXSTC, 00-09 FXSTB, 07-09 FXSTSSE, 00-07 FXSTD/FXST, 00-06 FXSTS, 03-04 FXSTDSE, 12-16 FLD, 14-17 FXDL, 12-17 FXDL, 00-10 FXD/L, 12-14 FXDC, 05-11 FXDC, 09-10 FXDFSE, 08-11 FXDF, 07-08 FXDSE, 06-08 FXDB, 00-08 FXDWG, 01-04 FXDP, 00-05 FXDX, 01-03 FXDXT, 00 FXDS-CONV, 02-03 XLH883R, 00-03 XLH883/883C/1200/1200C/1200S 2050-0601 For 18-22 FLTRXSE, 15-22 FLHXSE, 14 FLHRSE 2050-0603 For 10-13 FLTRX/FLHX, 10-11 FLHXXX, 09-13 FLHTCUTG 2050-0595 For 24 FLI, 22-24 FXLRST, 22 FXRST, 20-24 FXLRS, 19-20 FXDR, 18-24 FLHCS, 18-21 FLHC, 18-20 FLDE/FXLR 2050-0597 For 14-19 XL883L/1200C, 14-18 XL1200T 2050-0599 For 12-16 XL1200V, 11-13 XL883L, 10-12 XL1200X, 09-12 XL883N, 07 XL50, 06-11 XL1200L, 05-10 XL883L, 05-08 XL883R, 04-13 XL1200C, 04-09 XL883/C, 04-08 XL1200R 2050-0600 For 10-12 XR1200X, 09-10 XR1200, 07-12 VRSCDX, 07-10 VRSCAW, 07 VRSCX, 06-08 VRSCD, 06-07 VRSCR, 04-05 VRSCB, 05-06 VRSCSE, 02-06 VRSCA 2050-0602 For add-on Tour-Pak lighting (see note) SMART TRIPLE PLAY® MODULES • Converts rear turn signals to run-brake-turn • Works with LEDs or incandescent bulbs • Ten user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake) • Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight • Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight • Requires red rear turn signals for DOT compliance • Built-in short circuit protection • Sealed, weathertight case • Slim line design: 2.25” x 2” x 0.5” NOTE: PART #2050-0602 converts add-on Tour-Pak lighting (such as Custom Dynamics ProBEAM® LED King Tour-Pak Lamps PART #s 2040-2808, 2040-2809, 2040-3140 or 2040-3141) to function as run, brake and turn signal; plug-and-play with Tour-Pak Quick Disconnect harnesses PART #s 2120-1361, 2130-0267, 2050-0384 or 2050-0386 (sold separately). 2050-0595 2050-0598 2050-0600
8 JUNE 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 25 FLHXU, 24-25 FLHX, 23-25 FLHXSE 2020-2384 Amber/white 2020-2385 Selective yellow SHARK DEMON® HIGH PERFORMANCE LED TURN SIGNAL KITS • Designed exclusively for a seamless factory-quality fit • Ingeniously mounts to original wind deflector location • Adds a set of powerful, front-facing running lights and turn signals increasing rider safety • Selective yellow: dual-function high-intensity LEDs behind a selective yellow lens • Dual-color: white/amber switchback LEDs behind a smoked lens • Gloss black housings featuring aggressive fin accents and rugged metal rivets for bold, industrial styling • Plug-and-play • Includes necessary hardware • DOT compliant; selective yellow lens is SAE compliant 2020-2385 2020-2384
9 DRAGSPECIALTIES.COM JUNE 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0402-0012 For 23-25 FLHXSE/FLTRXSE/FLTRXSTSE ROAD AND TRACK FRONT FORKS • Complete front fork assemblies • Instant suspension upgrade • Features Öhlins 30 mm NIX damping system • Isolates the compression and rebound damping for enhanced precision and stability (compression adjustment in one fork leg, rebound adjustment in the other) • Weight and stress-optimized lower fork leg design • Fork tubes have titanium nitrate low-friction coating for smooth operation with no stiction • Forks come fully assembled with oil and 13 N/mm rate springs • 48 mm diameter with 4.6” (117 mm) stroke length • Fork leg length is 28.75” (730 mm) • Sold in pairs PART # DESCRIPTION 2030-2478 Chrome, red lens 2030-2476 Chrome, smoke lens PART # DESCRIPTION 2030-2479 Black, red lens 2030-2477 Black, smoke lens LIGHTSTRIKE™ TAILIGHT AND LICENSE PLATE HOLDERS • High strength polycarbonate lenses • Mounts to the factory taillight housing • Bolts on; no permanent modifications to your motorcycle • Plug-and play installation with OEM style connectors • Red LED run, selectable red or amber turn signal and red brake lights • Clean way to mount license plate without exposed hardware • Curved license plate holder 2030-2478 2030-2477 FOR 20-25 CHIEFTAIN, 19-25 CHIEFTAIN DARK HORSE, 20-25 CHALLENGER, 22-25 PURSUIT, 23 PURSUIT ELITE, 23 CHIEFTAIN ELITE, 20-21 CHIEF (EXCEPT POWERPLUS 112 W/ BLIND SPOT MONITORING SYSTEM)
10 JUNE 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # LENGTH ADJUSTABLE STROKE FOR 14-25 FLHT/FLTRX/FLTRU/FLTRK/FLHR/FLHX/FLHXU 1310-2632 12” (+0.50”/ -0”) Preload, rebound, compression, length 3” 1310-26331 12” (+0.50”/ -0”) Preload, rebound, compression, length 3” 1310-2630 13” (+0.50”/ -0”) Preload, rebound, compression, length 3.5” 1310-26311 13” (+0.50”/ -0”) Preload, rebound, compression, length 3.5” STX PRO SHOCKS • High-pressure nitrogen gas charged shock absorbers • 36 mm piston diameter • Adjustable rebound and compression damping • Standard and heavy duty spring rates available • Hard-anodized, CNC-machined components • Length adjustable by 1/ 2” • Adjustable preload with billet tool • Low-friction shaft and seal head design • Fully serviceable and repairable • Fits with Tour-Pak 1310-2632 1310-2630 1 Heavy-duty.
11 DRAGSPECIALTIES.COM JUNE 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION SPLIT-SPOKE CHROME SPLIT-SPOKE BLACK SPLIT-SPOKE BLUE SPLIT-SPOKE GOLD SPLIT-SPOKE RED FRONT RIMS 19” x 3.25” 0210-0431 0210-0429 0210-0439 0210-0440 0210-0441 21” x 3.5” 0210-0433 0210-0432 0210-0442 0210-0443 0210-0444 21” x 5.5” 0210-0435 0210-0434 - - - FRONT/REAR RIMS 18” x 5.5” 0210-0428 - 0210-0436 0210-0437 0210-0438 DESCRIPTION PROCROSS CHROME PROCROSS BLACK Y-SPOKE BLACK Y-SPOKE GOLD Y-SPOKE RED FRONT RIMS 21” x 3.5” - 0210-0407 0210-0356 0210-0360 0210-0376 FRONT/REAR RIMS 18” x 5.5” 0210-0338 0210-0406 - 0210-0359 0210-0375 DESCRIPTION DRIFT CHROME KICKBACK BLACK SPEED-5 BLACK SPEED-5 GOLD SPEED-5 RED 7 VALVE BLACK FRONT RIMS 19” x 3.25” - - 0210-0404 0210-0422 0210-0425 - 21” x 3.5” 0210-0396 0210-0400 0210-0405 0210-0423 0210-0426 0210-0345 FRONT/REAR RIMS 18” x 5.5” 0210-0394 - - 0210-0421 0210-0424 0210-0344 FORGED BILLET RIMS • All rims are CNC machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Rims accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings NOTE: Arlen Ness hub kits must be purchased separately to install. 0210-0344 0210-0396 0210-0400 0210-0407 0210-0422 0210-0425 0210-0428 0210-0436 0210-0437 0210-0359 0210-0338 0210-0441 0210-0429 0210-0356
12 JUNE 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION FINISH ATLANTIC HURRICANE LARGO MARLIN FRONT WHEELS 21 x 3.5 For 08-25 FLHT/FLHR/FLHX/FLTRX/ FLTRU/FLTRK 19-25 FLHTCUTG, 19-25 FLRT, 23-25 FLTRT dual disc w/ ABS Chrome 0201-24012 0201-23992 0201-23952 0201-23862 Black cut - 0201-24002 0201-23962 0201-23902 Matte bronze - - - 0201-24332 Solid black 0201-24022 0201-24502 0201-24472 0201-23882 21” x 3.5” for 08-19 FLHT/FLHR/ FLHX/FLTRX, w/o ABS Chrome 0201-2222 - 0201-2206 0201-23871 Black cut - - - 0201-23911 Solid black 0201-2336 0201-2451 0201-2448 0201-23891 21” x 3.5” for 00-07 FLHT/FLHR/ FLHX/FLTRX, w/o ABS Chrome - - - 0201-23921 Black cut - - - 0201-23941 Solid black - - - 0201-23931 DESCRIPTION FINISH ATLANTIC HURRICANE LARGO MARLIN REAR WHEELS 18 x 5.5 For 09-25 FLHT/FLHR/FLHX/FLHXU/FLTR/ FLTRX/FLTRU single disc w/ ABS Chrome 0202-21872 - 0202-21902 0202-21792 Black cut 0202-21892 0202-21862 0202-21912 0202-21832 Matte bronze - - - 0202-22092 Solid black 0202-21882 0202-22252 0202-22232 0202-21812 18” x 5.5” for 09-19 FLHT/FLHR/FLHX/FLTRX, w/o ABS Chrome 0202-2111 0202-2158 - 0202-21801 Black cut - 0202-2160 - 0202-21841 Solid black 0202-2177 0202-2226 0202-2224 0202-21821 REAR TRIKE WHEELS 18” x 7” for 09-25 FLHTCUTG, 20-23 FLHTCUTGSE, 15-25 FLRT, 23-25 FLTRT w/ ABS Chrome - - 0202-22103 - Black cut - - 0202-22113 - PRECISION-CAST 3D WHEELS • ”Cast” one-piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept lug-mounted OEM or aftermarket 14-24 FL Touring-style front rotors (sold separately) • Rear wheel hub accepts stock cush-drive, pulley and brake rotor • Available for ABS and non-ABS models • ABS style features intelligent ABS bearings that are “linked-brake ready”; no ABS system reprogramming required ATLANTIC CHROME HURRICANE CHROME LARGO CHROME MARLIN CHROME ATLANTIC BLACK CUT HURRICANE BLACK CUT LARGO BLACK CUT MARLIN BLACK CUT ATLANTIC SOLID BLACK HURRICANE SOLID BLACK LARGO SOLID BLACK MARLIN SOLID BLACK MARLIN MATTE BRONZE 1 Not compatible with TPMS. 2 24 FLHX/FLTRX will require Coastal Moto 320 mm rotors. 3 Left/right rear wheel. 1 Not compatible with TPMS. 2 24 FLHX/FLTRX will require Coastal Moto 320 mm rotors.
13 JUNE 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0602-1620 Ghost Risers - Softail Display Clamp - 8" - Black 0602-1621 Ghost Risers - Softail Display Clamp - 10" - Black 0602-1622 Ghost Risers - Clamp - 8" - Black 0602-1623 Ghost Risers - Clamp - 10" - Black GHOST RISERS AND TOP CLAMP KITS • CNC machined from 6061 aluminum for strength, precise fitment and cosmetic accuracy • Black anodized with contrast cut finish available to match color and appearance of handlebars • 11/2” of pullback for comfortable riding posture • 8” and 10” heights to accommodate end rise preference • Accepts 1” diameter handlebars • Fits models without a Batwing fairing and a standard 31/2” on-center riser mounts • Offered with 18-24 FXBB/FXBBS/FXBR/FXBRS/FXST digital display compatible top clamp or standard top clamp • Matching hardware included PART # DESCRIPTION 1620-2772 Chrome 1620-2769 Black 1620-2771 Gold 1620-2770 Red AGGRESSOR MALE MOUNT FOOTPEGS • Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek design • Aircraft-grade 6061 billet aluminum construction • Feature 12 cone-shaped stainless steel cleats per footpeg • Cutaway design for increased ground clearance • Aluminum clevis • Dimensions: 2.25” L x 3.5” W • Sold in pairs 1620-2769 1620-2770 1620-2772 1620-2771 0602-1620 0602-1621 0602-1623 0602-1622
RkJQdWJsaXNoZXIy NDI5NTY=