THE DRAG SPECIALTIES AUGUST 2026 DRAGSPECIALTIES.COM DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLHR/ FLTR/FLTRU/FLTRK/FLTRX (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1042 Extended reach LS heated RoadSofa™ seat EXTENDED REACH LS HEATED ROADSOFA™ SEATS • LS seats infuse old-school lattice stitch retro styling with a modern twist • Extended Reach design extends the driver’s seating area a full 2” from the stock seating position • Two-level heat adjustment that connects easily to the bike’s electrical system • Independently controlled heating elements for the rider and passenger • Brightly colored LEDs indicate the level of heat • Seat’s styling and function is unaffected by switches or wiring • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Seat features a combination of progressivedensity foam and GelCore™ inserts for superior driver and passenger comfort • LS seats have a perforated, ventilated leather cover for the ultimate in luxurious comfort, feel and looks • Protective rain cover included with LS seats • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead • Made in the U.S.A. NOTE: See Fatbook for matching Saddlemen® Roadsofa™ Tour-Pak backrest pads. FOR DRESSER/TOURING PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE W/O DRIVER’S BACKREST 0801-1629 LS w/ black stitching 0801-1633 CF w/ silver stitching 0801-1759 HC w/ red stitching 0801-1938 DS w/ black stitching 0801-1637 Plain W/ DRIVER’S BACKREST 0801-1630 LS w/ black stitching 0801-1634 CF w/ silver stitching PART # DESCRIPTION FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE (CONT) 0801-1939 DS w/ black stitching 0801-1638 Plain FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLHR/ FLTR/FLTRU/FLTRK/FLTRX/ (EXCEPT 23 FLHXSE/FLTRXSE) W/O DRIVER’S BACKREST 0801-1041 LS w/ black stitching W/ DRIVER’S BACKREST 0801-1043 LS w/ black stitching EXTENDED REACH ROADSOFA™ SEATS • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/ back pressure for maximum long-range comfort • Features a combination of progressive density foam and GelCore™ inserts for superior driver and passenger comfort • LS seats infuse old-school lattice stitch retro styling with a modern twist • CF seats feature the legendary carbon fiber look while providing comfort and stability • Honeycomb (HC) pattern incorporates modern geometry into a stylish seat cover • Dragon Scale (DS) seats showcase intricate scallop design • Extend the driver’s seating area by a full 2” • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead • Available with or without driver’s backrest • Made in the U.S.A. NOTE: See Fatbook for matching Saddlemen® Roadsofa™ Tour-Pak backrest pads. 0801-1043 0801-1634 0801-1638 0801-1759 0801-1938
2 AUGUST 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 17-25 FLHRXS, 24 FLHTK/FLTRK, 17-23 FLHT/FLHR/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 17-25 H-D FL TRIKE, 18-24 SOFTAIL 1010-2716 Black 1 FOR 91-22 XL (EXCEPT RH SPORTSTER) 1010-27221 Black 1 1010-27231 Chrome 1 OPTIONAL/REPL. COMPONENTS FOR ALL VELOCITY 90° AIR CLEANERS 1014-0302 Optional Beveled cover, chrome N/A 1014-0301 Optional Beveled cover, black N/A 1014-0300 Optional 10-gauge cover, chrome N/A 1014-0299 Optional 10-gauge cover, black N/A 1011-4357 Optional Pre-filter/rain sock N/A 1011-4451 Repl. air filter, black N/A VELOCITY 90° AIR CLEANER KITS • Forward facing 90° Velocity series intake • Aggressive short length intake tube engineered to significantly increase airflow without sacrificing legroom • Hidden breathers are O-ringed at the heads and exit at the mouth of the throttle body/carb to provide efficient engine breathing in a virtually closed loop system, eliminating the need for any external hoses or hardware • Velocity style performance filter features a built-in inverted top to pull in air not only from the sides of the filter but also the front, for more performance gaining airflow • Synthetic filter element is water-resistant and washable/reusable; for extreme weather situations rain socks are available (sold separately) • M-Eight applications include throttle servo cover • Designed to work with factory lowers • Pre-filter with hydrophobic technology repels water in wet and rainy conditions and deflects dirt and other harmful debris from your filter that would otherwise damage or clog the filter; sold separately • Replacement air filter fits all Velocity 90° air cleaners; sold separately • Optional 10-Gauge and Beveled covers are designed to bolt-on to the face of Arlen Ness Velocity 65° or Arlen Ness Velocity 90° air cleaners; sold separately NOTE: Exempt per CARB Executive Order (E.O.) # D-639-13 for 01-24 EFI models only. PART # DESCRIPTION EMIS* FOR 17-25 FLHRXS, 17-23 FLHT/FLHR/FLHX/FLTR (EXCEPT MODELS W/ FAIRING LOWERS, 23 FLHXSE/FLTRXSE), 17-25 H-D FL TRIKE, 18-24 SOFTAIL 1010-2453 Black 1 FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE (EXCEPT MODELS W/ FAIRING LOWERS), 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS 1010-2455 Black 1 FOR 01-17 TWIN CAM DELPHI EFI, 99-06 TWIN CAM CV CARB (EXCEPT MODELS W/ FAIRING LOWERS, 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS) 1010-2457 Black 1 1010-2458 Chrome 1 FOR 91-22 XL (EXCEPT RH SPORTSTER) 1010-24601 Chrome 1 OPTIONAL/REPL. COMPONENTS FOR ALL VELOCITY 65° AIR CLEANERS 1014-0302 Optional Beveled cover, chrome N/A 1014-0301 Optional Beveled cover, black N/A 1014-0300 Optional 10-gauge cover, chrome N/A 1014-0299 Optional 10-gauge cover, black N/A 1011-4357 Optional pre-filter/rain sock N/A 1011-4451 Repl. air filter, black N/A VELOCITY 65° AIR CLEANER KITS • Feature Big Sucker “hidden breather” technology and a forward facing 65° intake design that produces the highest air flow performance numbers (CFM) we have tested • Hidden breathers are O-ringed at the heads and exist out the mouth of the injector/carb to provide efficient engine breathing, eliminating the need for any external hoses or hardware • Integrated radius air inlet for performance gaining unobstructed airflow • M-Eight engine applications include a throttle servo cover • Inverted 65 style filter features a built-in inverted top to pull in air not only from all sides of the filter but also the front, which directs more performance gaining airflow into your engine • Each filter is constructed from synthetic material that is water resistant, which in most cases eliminates the need for a rain sock • Filters are reusable and do not require oil, just rinse and reuse • Pre-filter with hydrophobic technology repels water in wet and rainy conditions and deflects dirt and other harmful debris from your filter that would otherwise damage or clog the filter; sold separately • Replacement air filter fits all Velocity 65° air cleaners; sold separately • Optional 10-Gauge and Beveled covers are designed to bolt-on to the face of Arlen Ness Velocity 65° or Arlen Ness Velocity 90° air cleaners; sold separately NOTE: Exempt per CARB Executive Order (E.O.) #D-639-13 for 01-24 EFI models only. 1010-2716 1014-0299 1014-0300 1014-0301 1014-0302 1014-0299 1014-0302 1 Will fit 88-90 models also; breather system is not applicable for these model years. 1010-2458 1010-2455
3 DRAGSPECIALTIES.COM AUGUST 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS MOTO BILLET FOOTPEGS • Sleek and modern design with comfort and performance • Thin, tapered design for additional ground clearance • CNC machined from 6061-T6 billet aluminum • Male-mount configuration with 3/ 8” mounting holes or pegs without male mounts for M8 Softail models • 360-degree adjustable clevis with locking setscrews • Dimensions: 2 1/ 4” W x 3 1/ 2” L (not including clevis) • Sold in pairs NOTE: Mounting hardware is not included. NOTE: See Fatbook for an explanation of footpeg mount styles. PART # DESCRIPTION MALE-MOUNT FOOTPEGS 1620-2280 Gold (Titanium nitride-coated) 1620-2279 Red 1620-2326 1620-2327 1620-2279 1620-2280 PART # DESCRIPTION M-EIGHT SOFTAIL/ELW/PAN AMERICA DRIVER FOOTPEGS 1620-2326 Chrome 1620-2327 Black 1620-2329 Gold (Titanium nitride-coated) 1620-2328 Red SLID PLATES • Protects the exposed water line and wiring found between the frame and radiator • Constructed from 12-gauge alloy steel • Vented for better air flow • Easy install with factory hardware PART NO. DESCRIPTION 0506-2620 Skid plate Touring M8 black PART NO. DESCRIPTION 1621-1110 Apex Floorboards - black APEX FLOORBOARDS • Designed with maximum ground clearance without sacrificing comfort • Fit perfectly over stock HD mounts • 10” L and 4-1/5” W at widest point • Made with billet 1061 aluminum and machined deleon plastic scrape plate • Optional lift kit and tail extension available separately • Made in the USA Notes: '23 CVO Touring models will require 4 shoulder bolts HD part #50674-05. '24 CVO ST front floorboard mount will need to be changed to 2 HD part # 47200302A and 4 HD part # 50674-05 shoulder bolts.
4 AUGUST 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS NEIGHBOUR HATERS SLIP-ON MUFFLER • 4" round muffler body • Features a 4" billet aluminum black outer tip with distinctive machined dual grooves • Short body reaches the rear axle • Also features 2-1/4" louvered cores to achieve their great sound and performance • The core design produces good power on the stock 2-into-1 Softail head pipe, and will create even more performance when the rider decides to build more power with either a larger engine or standard industry hop-up parts • Made in the USA PART NO. DESCRIPTION 1801-1919 Muffler short dual groove tip chrome 1801-1920 Muffler short dual groove tip black 1801-1921 Muffler long dual groove tip chrome 1801-1922 Muffler long dual groove tip black 1801-1919 SHORT - DUAL GROOVE TIP - CHROME 1801-1920 SHORT - DUAL GROOVE TIP - BLACK
5 DRAGSPECIALTIES.COM AUGUST 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2120-1523 For 25-26 Challenger/Pursuit 2120-1522 For 21-24 Challenger, 22-24 Pursuit COMPLETE HANDLEBAR CONTROL WIRING HARNESSES • Replaces the OEM handlebar controls wiring harness • 12” longer than the stock wiring harness; allows installation of handlebars up to 20” taller than stock handlebars • All wiring is color-coded with OEM-style matching connectors for easy direct plug-in installation • Made in the U.S.A. PART # DESCRIPTION 2120-1529 For all 25-26 Scout 15” HANDLEBAR CONTROL EXTENSION HARNESS •Measures 15” L, works with handlebars up to 20” taller than stock •Replaces the OEM harness with more length •Easy installation •Made in the U.S.A. 2120-1523 PART # DESCRIPTION 1510-1321 For 24-26 Scout ADVENTURE-RACK • Designed to withstand road vibrations, impacts and high amounts of weight • Made of light, but sturdy, 4 mm-thick aluminum alloy • Mounts on original attachment points • Multiple functional bores that are compatible with adapter kits for many top cases • Expansive contact surface with plenty of tie-down points • Black powdercoated finish PART # DESCRIPTION 3502-0794 For 24-26 Scout w/ Limited+ Tech 3502-0795 For 24-26 Scout w/o Limited+ Tech PRO TANK RINGS • Allows mounting of PRO tank bags (sold separately) • Convenient quick-lock mechanism allows the tank bag to be mounted or removed in seconds • Bike-specific design provides complete stability and optimal fit • Magnetic guide for easy attachment • Simple installation on tank console • Constructed from fiberglass-reinforced polyamide • Mounting hardware included 3502-0795 3502-0794
6 AUGUST 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS GALFER Industrias Galfer was founded in 1952. The first products were drum brake linings and clutch discs. Since that time the company has moved to the forefront of the development and manufacturing of brake system components (discs, pads, shoes) and worked closely with top-level competition teams around the world to become a leader in braking systems. DESCRIPTION STYLE PART # FRONT BRAKE ROTORS For 08-13 FLHT/FLHR/FLHX/FLTR, 15-17 Softail, 06-17 Dyna, 14-19 XL Fixed 1710-4232 Floating 1710-4233 REAR BRAKE ROTORS For 08-25 FLHT/FLHR/FLTR/FLHX Fixed 1710-4236 SKULL BRAKE ROTORS • Made from 420 high-carbon stainless Tier-1 steel • Laser-cut, never stamped • Rotors measure 11.8” outside diameter • Each rotor is individually heat-treated and doubledisc parallel ground to ensure perfect flatness • Non-directional design, can be used in right or left applications NOTE: For maximum braking performance and rotor longevity, Galfer recommends using Galfer brake pads with Galfer rotors. 1710-4233 1710-4236 DESCRIPTION PART # For 84-99 Evolution Big Twin (except FXSTSB), 84-85 XL 1710-4210 11.5” FLOATING FRONT BRAKE ROTOR • Lower unsprung weight • More braking power • Better heat dissipation • Excellent resistance to corrosion • Less tendency to warp • Anodized stainless steel rotor w/ black carrier
7 DRAGSPECIALTIES.COM AUGUST 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION STYLE PART # FRONT For 08-13 FLHT/FLHX/FLTR, 09-13 H-D FL Trike, 08-16 FLHR, 15-17 Softail, 06-17 Dyna, 14-19 XL (11.8”) Fixed 1710-4228 Floating 1710-4230 For 09-11 FLSTSB, 00-05 FXSTS (11.5”) Fixed 1710-4209 For 00-14 Big Twin, 00-13 XL (except 08-14 FLHT/FLHR/FLTR/ FLHX and H-D FL Trike, Springer, V-Rod, 06-14 FXD) (11.5”) Fixed 1710-4212 Floating 1710-4213 DESCRIPTION STYLE PART # REAR For 08-13 FLHT/FLHR/FLHX/FLTR, 15-17 Softail, 06-17 Dyna, 14-19 XL (11.8”) Floating 1710-4234 For all 00-17 Big Twin, 00-10 XL (except V-Rod, 08-17 FLHT/FLHR/FLHX/FLTR and H-D FL Trike) (11.5”) Fixed 1710-4215 Floating 1710-4216 BRAKE ROTORS • Classic look and has more braking power than the original disc • Low working temperature and less tendency to warp • Excellent resistance to corrosion • Stainless steel high carbon content • Floating discs are made from anodized or chromed high-resistance aluminum (7075 T6-6082) or stainless steel (AISI 420) carrier 1710-4216 1710-4209 DESCRIPTION STYLE PART # FRONT BRAKE ROTORS For 08-13 FLHT/FLHX/FLTR, 08-16 FLHR, 15-17 Softail, 08-17 Dyna, 14-18 XL (11.8”) Fixed 1710-4229 Full-floating w/ black carrier 1710-4327 For 18-23 Softail, 14-18 XL, 14-15 XG 750 (11.8”) Full-floating w/ black/bright carrier 1710-3628 Full-floating w/ gold carrier 1710-4601 For 09-11 FLSTSB, 00-05 FXSTS (11.5) Full-floating w/ black carrier 1710-4211 For 00-14 Big Twin, 00-13 XL (except 08-14 FLHT/FLHR/FLTR/FLHX and H-D FL Trike, Springer, V-Rod, 06-14 FXD) (11.5”) Full-floating w/ black aluminum carrier 1710-5251 Full-floating w/ black/bright carrier 1710-4593 Full-floating w/ gold carrier 1710-4595 For 00-14 Big Twin, 00-13 XL (except 08-14 FLHT/FLHR/FLTR/FLHX and H-D FL Trike, Springer, V-Rod, 06-14 FXD) (13”) Full-floating w/ black carrier 1710-5253 Full-floating w/ gold carrier 1710-5257 STAINLESS STEEL BRAKE ROTORS • Made from 420 high-carbon stainless Tier-1 steel • Laser-cut, never stamped • Each rotor is individually heat-treated and double-disc parallel ground to ensure perfect flatness • Allows for lower operating temperatures at extreme conditions • Much lighter than a stock rotor • Non-directional design, can be used in right or left applications NOTE: For maximum braking performance and rotor longevity, Galfer recommends using Galfer brake pads with Galfer rotors. 1710-4594 1710-4229
8 AUGUST 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STAINLESS STEEL BRAKE ROTORS (CONT) 1710-4598 1710-4725 1710-4726 DESCRIPTION STYLE PART # REAR BRAKE ROTORS For 08-25 FLHT/FLHR/FLTR/FLHX (11.8”) Full-floating w/ black/machined carrier 1710-4235 Full-floating w/ blue carrier 1710-4724 Full-floating w/ orange carrier 1710-4725 Full-floating w/ red carrier 1710-4726 For 18-23 Big Twin, 14-18 XL, 14-15 XG 750 (11.8”) Full-floating w/ black/bright carrier 1710-4602 Full-floating w/ black/contrast carrier 1710-4603 Full-floating w/ gold carrier 1710-4604 For 00-14 Big Twin, 00-13 XL (except 08-14 FLHT/FLHR/FLTR/FLHX and H-D FL Trike, Springer, V-Rod, 06-14 FXD) (11.5”) Full-floating w/ black/bright carrier 1710-3622 Full-floating w/ gold carrier 1710-4598 SLA FACTORY-ACTIVATED AGM MAINTENANCE-FREE BATTERIES • AGM construction (Absorbed Glass Material) • VRLA battery (Valve Regulated Lead Acid) • Sealed and Factory-Activated • Spill-proof design • Multi-positional fitment • Ready and easy to use • Increased power and extended life • Extreme vibration resistance NOTE: Factory-Activated batteries should be charged once a month when not in service. PART # FITS MODEL BIG TWIN/XL/V-ROD 2113-0644 For 99-25 FLHT/FLHX/FLTR/FLTRX/FLTRU/FLTRK/FLHR/H-D FL Trike PART # YUASA REF. # CAPACITY AH (10-HR) CAPACITY AH (20-HR) CCA @ 0 °F LENGTH WIDTH HEIGHT APPROX. WEIGHT (LBS.) TERMINAL CONFIGURATION 2113-0644 YIX30L 30 31.6 400 6.5” 5” 6.8” 21.6 - +
9 DRAGSPECIALTIES.COM AUGUST 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS 1 Dual disc models require 2 sets. DESCRIPTION FRONT PART # REAR PART # For 20-24 Challenger/Dark Horse/Elite/LTD/STD 108” 1721-37081 1721-3707 For 22-24 Pursuit/Dark Horse/Elite/LTD 108” 1721-37081 1721-3707 For 14-24 Chieftain/Classic/Dark Horse/Elite/LTD/Premium 1721-37151 1721-3707 For 16-24 Roadmaster/Dark Horse/Elite/LTD/Premium 1721-37151 1721-3707 For 09-11 Roadmaster 1721-37121 1721-3714 For 02-08 Roadmaster/Vintage 1721-24761 1721-2476 For 16-24 Springfield/Dark Horse/LTD 1721-37151 1721-3707 For 23-24 Sport Chief 116” (Brembo front calipers) 1721-37081 1721-3707 For 22-24 Super Chief/LTD 1721-3715 1721-3707 For 22-24 Chief/Dark Horse 1721-3715 1721-3707 For 22-24 Chief Bobber Dark Horse 1721-3715 1721-3707 For 16-20 Chief Dark Horse 1721-37151 1721-3707 For 14-21 Chief Vintage (all) 1721-37151 1721-3707 For 14-20 Chief/Classic/Dark Horse 1721-37151 1721-3707 For 09-13 Chief Classic/Blackhawk/Dark/Dark Horse/Deluxe/Vintage 1721-37121 1721-3714 For 10-11 Chief Bomber 1721-24761 1721-3714 For 02-08 Chief (all) 1721-24761 1721-2476 For 25 Scout 101 (cast 5-spoke 19/16” wheels) 1721-37081 1721-3711 For 25 Scout Bobber (all) (cast 8-spoke 16” wheels) 1721-3711 For 25 Scout Classic (all) (spoked 16” wheels) 1721-3711 For 25 Sport Scout (all) (qarter fairing, cast 8-spoke 19/16” wheels) 1721-3711 For 25 Super Scout (spoked 16” wheels) 1721-3711 For 17-24 Scout/Sixty (J Juan calipers) 1721-3711 For 18-24 Scout Bobber/Sixty/Twenty (J Juan calipers) 1721-3711 For 22-24 Scout Rogue/Sixty (J Juan calipers) 1721-3711 For 15-16 Scout/Sixty (Toso calipers/cast wheels) 1721-3709 1721-3710 For 02-08 Scout (all) 1721-24761 1721-2476 For 23-24 FTR1200 Sport (cast 17/17” wheels) 1721-37081 1721-3713 For 23-24 FTR1200 Rally (cast 19/18” wheels) 1721-37081 1721-3713 For 22-23 FTR1200 Championship Edition (cast 17/17” wheels) 1721-37081 1721-3713 For 21-24 FTR1200R Carbon (cast 17/17” wheels) 1721-37081 1721-3713 For 21-24 FTR1200 (cast 17/17” wheels) 1721-37081 1721-3713 For 21-22 FTR1200S (cast 17/17” wheels) 1721-37081 1721-3713 For 20-24 FTR1200 Rally (spoke 19/18” wheels) 1721-37081 1721-3713 For 20 FTR1200 Carbon LE (cast 19/18” wheels ) 1721-37081 1721-3713 For 19-20 FTR1200 (cast 19/18” wheels) 1721-37081 1721-3713 For 19 FTR1200 Rally LE (spoke 19/18” wheels) 1721-37081 1721-3713 For 19 FTR1200S (cast 19/18” wheels) 1721-37081 1721-3713 PREMIUM SINTERED METAL BRAKE PADS • Premium sintered metal brake pads designed for Indian motorcycles • More durable than the stock brake pads • Pad backing plate features a high-tech ceramic heat shield that keeps heat away from the caliper piston and brake fluid • No brake dust, noise or brake fade NOTE: Not to be used with plated rotors. 1721-3707 1721-3708 DESCRIPTION PART # PERFORMANCE MACHINE 125 x 4R (0052-2400, 0052-1602, 0052-2420) 1721-2476 137 x 4B (0053-2915, 0053-2916, 0053-2917, 0053-2918, 0053-2919,0053-2920, 0053-2922, 0053-2932, 0053-2933, 0053-2948, 0053-2949) 1721-2476 BRAKE PADS AFTERMARKET CALIPER BRAKE PADS
10 AUGUST 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CUSTOM DYNAMICS Add eye-catching LEDs to your bike and be seen! Custom Dynamics has bright, colorful LED accents for the newest American V-Twin models that will set your bike apart from the crowd. And all are designed to be direct plug-in installation for a fast, simple upgrade to your ride. PART # DESCRIPTION FOR 26 FLHX/FLHXL/FLHXSE/FLHXSTSE/FLHXLSE/FLTRX/FLTRXL/FLTRXSTSE/FLTRT 2001-3143 Clear lens 2001-3144 Selective yellow lens SHARK DEMON® HIGH PERFORMANCE LED FOG LIGHT KITS • Aggressive industrial styling • Complements Shark Demon® headlights (sold separately) with signature fins and exposed screws for bold, industrial look • Gloss black aluminum housing combines lightweight strength with a sleek, high-end finish for durability and style • Durable polycarbonate lens is impact- and scratch-resistant for maximum protection in rugged riding environments • 4140 raw lumnes/2080 effective lumens; delivers brilliant, road-filling light to boost nighttime visibility and safety • Clear lens: 5800 to 6500K; crisp, ultra-bright white light for enhanced detail and maximum visibility • Selective yellow lens: 2900 to 3100K; cuts through fog, rain and snow by minimizing glare and boosting contrast • Waterproof to IP67; fully sealed against water and dust • Adjustable beam directs light exactly where you need it with flexible vertical or horizontal mounting • Kit includes pair of fog light assemblies and plug-and-play wiring for easy installation • SAE/ECE compliant PART # DESCRIPTION 2040-3514 For 26 FLHLT/FLHLTSE/FLHXL/FLHXLSE/FLTRXL, 25 FLHXU LOWER FAIRING LED LIGHT KIT WITH RUN/TURN SIGNALS • Replaces factory lower fairing covers (OEM #s 57100445/57100446) or fog lamps (OEM #s 68000406/68000407) on 23-26 H-D Touring models with OEM lower fairings • Features bright white running lights that switch to full-contrast amber LED turn signals for enhanced visibility • Smoked diffused lens provides a smooth, modern light appearance while maintaining sharp signaling • Comes with integrated connectors and wire harnesses for quick plug-andplay installation • IP67-rated construction ensures long-lasting performance in any riding condition 2001-3144 2001-3143
11 DRAGSPECIALTIES.COM AUGUST 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 26 FLHX/FLHXL/FLHXLSE/FLHXSE/FLHXSTSE/FLTRX/FLTRXL/FLTRXSTSE 2040-3518 Red lens 2040-3519 Smoke lens LED SADDLEBAG LATCH LIGHTS • Seamlessly replaces the factory reflector in the saddlebag hinge faceplate for a clean, integrated appearance • High-output LEDs provide enhanced visibility with customizable lighting configurations • Configure as red running light and red brake light with amber turn signal flash or dual-intensity red running and brake light only PART # DESCRIPTION FOR 26 FLHX/FLHXL/FLHXLSE/FLHXSE/FLHXSTSE/FLTRX/FLTRXL/FLTRXSTSE 2040-3516 All-red/red lens 2040-3517 All-red/smoke lens 2040-3515 Dual-color/smoke lens LOW PROFILE LED SADDLEBAG LIGHT KITS • Single row LED strip mounts just below the saddlebag lid on the rear-facing side for a clean, factory-custom appearance • Two LED configuration options: all-red LEDs (run/brake/turn) or dual-color LEDs (red run/brake, amber turn) • Operates as low-intensity running lights, high-intensity brake lights and fully integrated turn signals for improved rear visibility • Customizable turn signal modes; choose from three selectable patterns: solid on, sequential on (light flows outward from center) or sequential off (fully lit then fades outward from center) • Extended wire leads connect to a provided under-seat harness for a straightforward installation; no cutting required • Built-in quick disconnects allow easy saddlebag removal without rewiring • Designed to withstand vibration, weather and daily riding conditions for longlasting performance • Sold in pairs 2040-3515 2040-3519 • Pre-pinned wiring with included connectors allows for quick, hassle-free connections under the seat; no cutting or splicing required • Improves rear and side visibility for added rider safety in all conditions • Choose between a red lens for maxiumum brightness or a smoked lens • Built to withstand vibration, weather and road conditions for long-lasting reliability • Sold in pairs 2040-3517 2040-3518 2040-3516
12 AUGUST 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2040-3513 For 24-26 FLHX/FLTRX, 23-26 FLHXSE, 26 FLHXSTSE, 25 FLHXU, 24-26 FLTRXSTSE, 23-25 FLTRXSE, 25 FLTRXRRSE PROBEAM® SIGNATURE SERIES LED TAILIGHT PANELS • Directly replaces factory taillight and rear turn signal units on most 23-26 H-D Touring models • Signature ProBEAM® styling features a modern diffused LED light pipe running light with bold, high-contrast red brake LEDs behind a sleek smoked lens • Integrated amber LEDs offer programmable turn signal flash patterns using the magnetic tool: standard (all-on flash) or sequential-off (selectable up or down motion) • High-output LEDs dramatically improve rear visibility for braking and signaling compared to stock lighting • Designed with OEM-style connectors and mounts for a fast, hassle-free install; no cutting or splicing required • Durable IP67 rated construction protects against water and dust intrusion in all riding conditions • Meets DOT compliance standards • Sold as a pair PART # DESCRIPTION FOR 24-26 FLHX/FLTRX/FLTRXSTSE, 23-26 FLHXSE, 26 FLHXSTSE, 25 FLHXU/FLTRXRRSE, 23-25 FLTRXSE 2040-3522 Red lens 2040-3523 Smoke lens FOR 17-25 FLHRXS, 14-22 FLHR, 14 FLHRSE, 14-24 FLHTK, 19-22 FLHT, 14-21 FLHTKSE, 14-19 FLHTCU, 14-18 FLHTKL, 15-16 FLHTCUL/FLTRUSE, 14-23 FLHX/FLHXS, 22-23 FLHXST/ FLTRXST/FLTRKSE, 14-22 FLHXSE, 20-24 FLTRK, 15-23 FLTRX/FLTRXS, 18-22 FLTRXSE, 16-19 FLTRU 2040-3524 Red lens 2040-3525 Smoke lens FOR 97-13 FLHR, 98-13 FLHRC, 04-07 FLHRS, 02-03/07-08 FLHRSE, 97-10 FLHT, 97-13 FLHTC/FLHTCU, 98-09 FLTR, 06-09 FLHX, 10-13 FLHTK, 04-05 FLHTCSE, 06-13 FLHTCUSE, 11-13 FLTRU, 00-01/09 FLTRSE, 11 FLTRUSE, 00-07 FXSTD, 99-15 FXST, 99-09 FXSTB, 16-17 FLSTFBS, 10-17 FLSTFB, 08-11 FLSTSB, 07-09 FXSTSSE, 06/08-10 FLST, 05-07 FLSTSC, 05-06 FLSTFSE, 97-03 FLSTS, 96-99/07-10 FXSTC, 96-06 FXSTS, 96-17 FLSTC/FLSTF, 96/05-17 FLSTN, 16-17 FXDLS, 12-14 FXDC, 09-10 FXDFSE, 08-17 FXDF, 07-08 FXDSE, 06-17 FXDB, 05-14 FXDC, 03-04 FXSTDSE,01-02/10-17 FXDWG, 01-03 FXDXT, 99-05 FXDX, 97-10 FXD, 97-17 FXDL, 97-08 FXDWG, 99-00 FXDS-CONV, 12-16 FLD, 99-00 FXR 2040-3526 Red lens 2040-3527 Smoke lens FOR 18-20/25-26 FXBB/FLFB, 22-26 FXLRST, 22 FXRST, 21-24 FXBBS, 20-24 FXST, 20-26 FXLRS, 19-20 FXDRS, 18-20 FXFB/FXLR/FLDE, 18-19/23-26 FXBR, 18-22 FXBRS, 18-21/25-26 FLHC, 18-21 FLSB/FLSL 2040-3520 Red lens 2040-3521 Smoke lens SEAT BOLT MOUNTED RUN/BRAKE LIGHT KITS • Aggressively styled gloss black housing for a performance/raceinspired look • Features six high-intensity dual-mode red LEDs for maximum visibility • Provides both auxiliary running and brake light function for enhanced safety • Wheelie-proof placement: seat bolt mounting keeps your third brake light visible • Includes plug-and-play harness for hassle-free setup and simple seat removal • 12-point, corrosion-resistant bolt supplied in gloss black finish 2040-3525 2040-3524
13 DRAGSPECIALTIES.COM AUGUST 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 26 FLHX/FLHXSE/FLHXSTSE/FLTRX/FLTRXSTSE 2030-2492 Chrome 2030-2491 Black ALL-IN-ONE LED LICENSE PLATE FRAME WITH AMBER TURN SIGNALS • Low profile, durable aluminum construction with 12° radius curvature • Integrated six white LEDs for bright license plate illumination • Dual-intensity red LEDs function as running and brake lights • Amber LEDs on each side serve as left and right turn signals • Frame dimensions: 41/ 4” H x 73/ 16” W • Mounting holes center-to-center are 213/ 16” x 53/ 4” • 100% plug-and-play installation; no cutting or splicing required • Mounting hardware included for hassle-free setup • Compatible with Custom Dynamics License plate mount PART #S 2030-1959, 2030-1960 (sold separately) PART # DESCRIPTION 2030-2490 For 24-26 FLHX/FLTRX/FLTRXSTSE, 23-26 FLHXSE, 26 FLHXSTSE, 25 FLHXU, 23-25 FLTRXSE ULTRA-LITE LOW PROFILE LED LICENSE PLATE KIT • Engineered to replace the OEM license plate bracket assembly #67900726 • Durable, corrosion-resistant low profile radius mount is crafted from lightweight aluminum for long-lasting performance • Attaches directly to the rear fender using the OEM bolt holes for a clean, hassle-free install • Radius license plate frame includes simple plug-and-play connections; no cutting or splicing required • Bright, evenly distributed white LEDs embedded across the top of the frame provide clear license plate visibility • Sits close to the fender for a sleek, streamlined, factory-style appearance • Designed for standard 4” x 7” license plates PART # DESCRIPTION FOR 20-26 FXLRS/FXLRST, 19-20 FXDRS, 18-20 FXFB/S, 18-21 FLSB 0214-3349 Brushed aluminum 0214-3348 Gloss black FRONT AXLE COVER KITS • Eliminates the unattractive hollow axle look on M-Eight Softails for a sleek, finished appearance • Subtle performance-driven styling that enhances the overall front-end aesthetic • Precision-machined aluminum endcaps sit flush for a true factory look; no bulky or protruding hardware • Countersunk bolts thread into a center aluminum spacer shaft with internal threads, keeping everything streamlined and clean • Durable, lightweight aluminum components built to last in all riding conditions • Includes a round rubber washer to minimize vibration where the endcap meets the fork leg • Comes in gloss black or brushed aluminum • Includes all necessary hardware 0214-3348 0214-3349 2030-2491 2030-2490 2030-2492
14 AUGUST 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2120-1544 For 14-24 FLHTK, 14-19 FLHTCU, 15-18 FLHTKL, 14-21 FLHTKSE, 20-24 FLTRK, 22-23 FLTRKSE, 16-19 FLTRU, 14-25 FLHTCUTG, 20-22 FLHTCUTGSE 12V POWER PORT • Provides dual USB ports: one Quick Charge 3.0 USB-A, one PD3.0 USB-C • Easily charge phones, tablets, GPS units and other electronics directly inside the Tour-Pak • Built-in USB charging capability with a convenient power control switch ensuring that the charger will not continue to consume your battery when it is idle, saving energy • Bright blue LED voltmeter provides real-time battery voltage monitoring at a glance • Durable cap keeps the socket protected from water, dust and debris when not in use • Custom-shaped bracket positions the power port perfectly for clearance, accessibility and everyday use • Bracket shape aligns with the factory carpet cutout • Mounts directly to Tour-Pak lid tether location using existing hardware for a clean, factory-style install • Durable stainless-steel construction provides strength while maintaining a low profile design inside the Tour-Pak • Includes battery harness with inline fuse for straightforward installation • Integrated 10A fuse helps protect electrical components and connected devices • Automatic shut-down safety feature helps prevent overheating and reduce risk of electrical damage • Built-in smart chip enables each port to intelligently identify your device and maximize charging speeds • Sleek black components blend seamlessly with the interior of the Tour-Pak PART # DESCRIPTION 2050-0608 For 26 FLHX/FLHXSE/FLHXSTSE/FLTRX/FLTRXSTSE MAGIC STROBES™ BRAKE LIGHT FLASHER • Instantly boost your safety by adding flashing and strobe patterns to your brake lights • Easy plug-and-play installation under the seat into existing wire harness • Ten unique user-selectable flash and strobe patterns • Quickly switch between patterns with dial control PART # DESCRIPTION 2120-1545 For 24-26 FLHX/FLTRX, 25 FLHXU/FLTRXRRSE, 26 FLHXL/FLHXSTSE/FLHXLSE/FLHLT/ FLHTLTSE/FLTRT, 23-26 FLHXSE, 23-25 FLTRXSE P&A DUAL ACCESSORY CABLE • Purpose built for H-D Touring bikes, ensuring seamless compatibility and reliable performance • Converts your factory P&A connector into two usable ports allowing you to power multiple accessories from a single source • Installs directly into the OEM P&A connector with no cutting, splicing or modifications required • Maintains the integrity of your stock wiring harness for a clean, reversible installation • Perfect for powering accessories like lighting, GPS units or other electronic add-ons
RkJQdWJsaXNoZXIy NDI5NTY=