THE DRAG SPECIALTIES SEPTEMBER 2026 DRAGSPECIALTIES.COM SEPTEMBER 2026 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS KLOCK WERKS Fairings to fenders, Klock Werks has you covered! Their line of Flare® windshields and handguards are now available for the latest American V-Twin models. And they now have their popular Vicla style stretched rear fenders ready for M-Eight Softail models. PART # DESCRIPTION FOR 22-26 FXLRST 2310-1005 6” blue ice 2310-1004 6” green ice 2310-1003 6” yellow ice 2310-1002 6” orange ice PART # DESCRIPTION FOR 22-26 FXLRST (CONT) 2310-1001 6” pink ice 2310-1010 8” blue ice 2310-1009 8” green ice 2310-1008 8” yellow ice PART # DESCRIPTION FOR 22-26 FXLRST (CONT) 2310-1007 8” orange ice 2310-1006 8” pink ice ICE KOLOR FLARE® WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S; and also under International Patents: 324093, 324094, 325192. 2310-1005 2310-1004 2310-1001 2310-1002 2310-1003
2 SEPTEMBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 1401-1197 9” Vicla, frenched 1401-1196 9” Vicla, smooth PART # DESCRIPTION 1401-1199 9” Vicla, frenched 1401-1198 9” Vicla, smooth REAR FENDERS • Available in 9” Vicla for dramatic styling • Predrilled to match stock mounting locations and stamped in 14ga US steel • Finished with an E-coating to prevent rust and corrosion • Available with or without a frenched license plate pocket • Made in the U.S.A. 1401-1197 1401-1196 1401-1198 1401-1199 FOR 18-26 FLHC/FLHCS/FLDE (6.5” WIDE) FOR 11-17 FXS/FLS/FLSS (6.5” WIDE)
3 DRAGSPECIALTIES.COM SEPTEMBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2040-3509 For FXRP/FXRT/FXRD fairings PURSUIT LIGHT PODS FOR FXRP/FXRT/FXRD FAIRINGS • Durable construction from high-quality vacuum-formed from paint-friendly black ABS • Designed to complement Klock Werks FXRP fairing (may fit stock and other aftermarket fairings) • Adds form and function while boosting visibility • Includes two FXRP light pods, two trim and all hardware • Easy installation with the intuitive bolt-on option as well as the bonding option for seamless body work • Requires 4.5” light of your choice (lighting sold separately) PART # DESCRIPTION 0521-2199 FOR 24 FLHTK, 14-23 FLHT/FLHX (EXCEPT 23 FLHXSE), 14-25 FLHTCUTG FAIRING VENT SCREEN • Accent the vent in the H-D vented fairing with Klock Werks’ fairing vent screen • Available in black, honeycomb pattern mesh aluminum • Fairing vent screen is easy-to-install, and adds a custom touch to the front of your fairing • Vent screen may even catch or stop larger bugs and other road debris from entering through your fairing vent • Installation instructions and mounting adhesive included • Made in the U.S.A.
4 SEPTEMBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS BLUE BRONZE GREEN ORANGE PURPLE RED YELLOW FOR 20-25 CHALLENGER, 22-25 PURSUIT, 14-25 CHIEFTAIN, 15-25 ROADMASTER, 16-25 SPRINGFIELD, 22-25 CHIEF, 14-22 CHIEF/VINTAGE 0635-2939 0635-2941 0635-2938 0635-2936 0635-2940 0635-2935 0635-2937 FLARE® HAND GUARDS • Available in all Klock Werks® classic tints, Kolor, and Ice finishes to match Flare® Windshields or custom paint schemes • Fits most 14-25 Indian models except Scout and FTR models • Hand Guard material: Polycarbonate for classic tints; acrylic for Ice and Kolor finishes • Hardware material: black e-coated aluminum; hardware can be stripped, polished and anodized to colour match build components • Easy installation with simple setup and all necessary hardware • Sold in pairs (left and right) • Made in the U.S.A. 0635-2935 NOTE: Check Dragspecialties.com website for the specific fitment needed and installation before ordering. Fitment may also vary based on turn signal, handlebar, and windshield setups. NOTE: Clean with gentle solutions like Shine Werks® or mild soapy water. Avoid ammonia, alcohol, or solvent-based cleaners (like Windex®) to preserve tint, coating, and UV protection. If using dish soap, follow with a wax-based cleaner for optimal performance, like Shine Werks, sold separately. 0635-2937 0635-2936 0635-2938 0635-2939 0635-2941 0635-2940 KOLOR FLARE®
5 DRAGSPECIALTIES.COM SEPTEMBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS BLUE ICE GREEN ICE ORANGE ICE PINK ICE YELLOW ICE FOR 20-25 CHALLENGER, 22-25 PURSUIT, 14-25 CHIEFTAIN, 15-25 ROADMASTER, 16-25 SPRINGFIELD, 22-25 CHIEF, 14-22 CHIEF/VINTAGE 0635-2934 0635-2933 0635-2931 0635-2930 0635-2932 DARK SMOKE BLACK CLEAR TINT FOR 20-25 CHALLENGER, 22-25 PURSUIT, 14-25 CHIEFTAIN, 15-25 ROADMASTER, 16-25 SPRINGFIELD, 22-25 CHIEF, 14-22 CHIEF/VINTAGE 0635-2928 0635-2926 0635-2927 0635-2929 FLARE® HAND GUARDS (CONT) 0635-2928 0635-2927 0635-2929 0635-2926 0635-2933 0635-2934 0635-2932 0635-2930 0635-2931 ICE FLARE® TINT FLARE®
6 SEPTEMBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 0925-1669 Chain drive w/ 540 cam 3 0925-1670 Gear drive w/ 540 cam 3 GEAR DRIVE AND CHAIN DRIVE CAM CHEST KITS FOR M-EIGHT • All parts in each kit are matched to ensure superior quality, fit, finish and performance • Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for the flywheel cavity and cam chest • Debris screens in both scavenge pickups • Increased oil flow capacity on both the feed and scavenge sides • Adjustable pressure relief valve is adjustable with the unit installed in the engine • S&S Quickee Pushrods with chrome pushrod tubes • S&S premium tappets • Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion • Improves tappet stability in high-lift situations • Compatible with round or oval port valve springs • Boost power and gives a racy, aggressive sound at idle • 540 cam is designed for acceleration and torque in 124” and larger engines; enhances torque output in 4.25” big bore kits • All kits include necessary gaskets, bearings and hardware required for a complete installation • Made in the U.S.A. 0925-1670 FOR 17-26 WATER-COOLED M-EIGHT
7 DRAGSPECIALTIES.COM SEPTEMBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 0925-1671 Chain drive w/ 540 cam 3 GEAR DRIVE AND CHAIN DRIVE CAM CHEST KITS FOR M-EIGHT (CONT) FOR 17-26 OIL-COOLED M-EIGHT
8 SEPTEMBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 17-26 M-EIGHT 0925-1651 W/ water-cooled engines 0925-1690 W/ oil-cooled engines OIL PUMP AND CAM SUPPORT PLATE KIT • Precision-machined from billet aluminum • Independent scavenge sections for the flywheel cavity and the cam chest • Debris screens in both scavenge pickups • Magnet in the cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the feed and scavenge side PART # DESCRIPTION 0925-1689 For 17-26 M-Eight CAM PLATE FOR M-EIGHT • Precision-machined from billet aluminum • Blue anodized finish • Passage plugs are removable for servicing • For use with OEM or S&S oil pumps • Made in the U.S.A. PART # DESCRIPTION FOR 17-25 M-EIGHT, 07-17 TWIN CAM AND 06 DYNA 0925-1647 Outer roller chain, 22 links; repl. OEM #25675-06 FOR 07-17 TWIN CAM AND 06 DYNA 0925-1646 Inner roller chain; 16 links; repl. OEM #25683-06 CAM CHAINS • Direct replacement for the OEM chain • Heat-treated and engineered to increase chain life • Adjustable pressure relief valve can be adjusted with the unit still in the engine • Passage plugs are removable for servicing • Blue anodized finish • Made in the U.S.A. 0925-1651 0925-1690 0925-1647
9 DRAGSPECIALTIES.COM SEPTEMBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION W/O DRIVER’S BACKREST 0801-2342 W/ black stitching 0801-2344 W/ black LS 0801-2345 W/ blue LS 0801-2351 W/ gold LS 0801-2346 W/ grey LS PART # DESCRIPTION W/O DRIVER’S BACKREST (CONT) 0801-2347 W/ orange LS 0801-2348 W/ red LS 0801-2349 W/ silver LS W/ DRIVER’S BACKREST 0801-2350 W/ white LS PART # DESCRIPTION W/ DRIVER’S BACKREST (CONT'D) 0801-2343 W/ black stitching 0801-2352 W/ black LS 0801-2353 W/ blue LS 0801-2359 W/ gold LS 0801-2354 W/ grey LS PART # DESCRIPTION W/ DRIVER’S BACKREST (CONT'D) 0801-2355 W/ orange LS 0801-2356 W/ red LS 0801-2357 W/ silver LS 0801-2358 W/ white LS ROADSOFA™ KING SEATS • Sets a new standard for wide, plush touring seats • Full 17.5” width, the largest Roadsofa™ seat yet, making it the ideal long distance travel partner • Generous 15” W pillion and SaddleGel™ inside makes long days in the passenger saddle a breeze • Tall lumbar area provides maximum lower back support, while the streamlined nose improves the driver’s reach to the ground • SaddleGel and ProFoam™ composition is uniquely formulated to provide maximum cushioning for both rider and passenger • GelCore™ technology reduces tailbone pressure, helping to increase circulation and comfort • Refined split-cushion design separates the seating surface from the lumbar support, further reducing tailbone and lower back pressure • LS seats infuse old-school lattice stitch retro styling with a modern twist • Available with or without a built-in, removable and fully adjustable driver’s backrest • Made in the U.S.A. PART # DESCRIPTION 0801-2249 W/ blue stiching 0801-2250 W grey stiching 0801-2251 W/ orange stiching PART # DESCRIPTION 0801-2252 W/ red stiching 0801-2253 W/ silver stiching ROADSOFA™ TRI-GRIPPER KING TOUR-PAK BACKREST PADS • Integrate the look of your Saddlemen® seat with your Tour-Pak • Each complete Tour-Pak pad is built on a strong, rigid base pan and includes all the hardware you need for easy installation • Constructed from durable, comfortable Saddlehyde™ material • Multiple stitch patterns and colors to match your rider’s saddle • Tri Gripper design incorporates gripper material in an eye-catching geometric pattern • Made in the U.S.A. 0801-2251 0801-2342 0801-2345 0801-2359 0801-2356 FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLHR/FLTR/FLTRU/FLTRK/FLTRX (EXCEPT 23 FLHXSE/FLTRXSE) FOR 14-25 FLHT/FLHX/FLHR/FLTR/FLTRU/FLTRK/FLTRX
10 SEPTEMBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS NAMZ Namz voltage regulators for American V-Twins are engineered for maximum performance and reliability. Direct replacement for the OEM regulator, they feature a billet aluminum housing in a smooth or ballmilled design so they look as good as they work. PART # DESCRIPTION FOR 04-06 XL (REPL. OEM #74523-04) 2112-2138 Chrome 2112-2140 Chrome ball milled 2112-2137 Black 2112-2139 Black ball milled FOR 94-03 XL (REPL. OEM #74523-94) 2112-2134 Chrome 2112-2136 Chrome ball milled 2112-2133 Black 2112-2135 Black ball milled REGULATORS • Engineered for performance and reliability • Billet aluminum housings with a smooth or ballmilled design • Direct replacement for the OEM unit • Made in the U.S.A. 2112-2126 2112-2132 2112-2133 2112-2139
11 DRAGSPECIALTIES.COM SEPTEMBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 1601-0611 Reaper adjustable shift rod REAPER ADJUSTABLE SHIFT ROD • Fits most forward-controls on Dyna, Softail, and Touring models • Textured black finish • Precision CNC-machined billet aluminum • Adjustable from 12” to 13” PART # DESCRIPTION 2020-2425 Reaper front amber turn signals REAPER FRONT AMBER LED TURN SIGNALS • Precision CNC machined billet aluminum • Gloss black finish • Single function turn signal light only • Front signals use solid 5/ 16” bolt, lighting controller or load equalizer may be required • Sold in pairs PART # DESCRIPTION FOR 08-26 TOURING, 19-26 H-D FL TRIKE, 06-17 V-ROD (FRONT BRAKE CALIPER); REPL. OEM #S 41783-08, 4890 1742-0800 Polished 10 mm x 1.00 banjo bolt w/ bleeder 1742-0801 Black anodized 10 mm x 1.00 banjo bolt w/ bleeder 1742-0802 Gold anodized 10 mm x 1.00 banjo bolt w/ bleeder FOR 08-26 TOURING, 06-17 V-ROD (FRONT/REAR CLUTCH MASTER CYLINDER AND REAR BRAKE CALIPER); REPL. OEM #41750-06B 1742-0791 Polished 10 mm x 1.00 banjo bolt 1742-0792 Black anodized 10 mm x 1.00 banjo bolt 1742-0793 Gold anodized 10 mm x 1.00 banjo bolt FOR 00-07 TOURING (FRONT/REAR MASTER CYLINDER AND BRAKE CALIPER), 00-14 SOFTAIL, 00-07 DYNA, 00-03 XL (FRONT/REAR CALIPER AND REAR MASTER CYLINDER), 15-17 SOFTAIL (REAR MASTER CYLINDER AND CALIPER),14-16 H-D FL TRIKE, 02-05 V-ROD AND 07-13 CVO SOFTAIL (CLUTCH MASTER CYLINDER); REPL. OEM #41747-82A 1742-0788 Polished 3/8”-24 x 7/8” banjo bolt 1742-0789 Black anodized 3/8”-24 x 7/8” banjo bolt 1742-0790 Gold anodized 3/8”-24 x 7/8” banjo bolt FOR 18-26 SOFTAIL, 14-22 XL883/1200 (FRONT/REAR MASTER CYLINDER AND REAR BRAKE CALIPER), 15-17 SOFTAIL (FRONT MASTER CYLINDER AND CALIPER); REPL. OEM #11600001 1742-0794 Polished 10 mm x 1.25 banjo bolt 1742-0795 Black anodized 10 mm x 1.25 banjo bolt 1742-0796 Gold anodized 10 mm x 1.25 banjo bolt FOR 18-26 SOFTAIL DUAL DISC (FRONT MASTER CYLINDER); REPL. OEM #41737-04A 1742-0797 Polished 12 mm x 1.50 banjo bolt 1742-0798 Black anodized 12 mm x 1.50 banjo bolt 1742-0799 Gold anodized 12 mm x 1.50 banjo bolt 12-POINT TITANIUM BANJO BOLTS • CNC machined from solid titanium • 12-point bolt head with spot drilled design around the bolt flange • Sold as a 5-pack and includes 10 crush washers 1742-0790 1742-0797 1742-0792 1742-0802
12 SEPTEMBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION BRAWLER KIT 0506-2624 For 14-23 FLHT/FLHR/FLHX/FLTR FRONT BRAWLER KIT 0506-2625 For 18-26 Softail w/ mid controls (except FXDR/FXDRS) BRAWLER KITS • Designed to grind down during impacts to prevent bike from catching and flipping • Functions as a highway bar for a secure grip and comfortable footrest on long rides • Durable materials ensure strong defense against damage during stunts or everyday use • Safeguards your investment and reduces potential repair costs • Balances performance with style, suited for both aggressive riding and extended journey • TIG-welded for maximum durability • Chrome finish • 7-gauge mild steel mount and gussets • Replaceable Delrin sliders • ½”-13 socket head cap screw hardware included NOTE: Due to interference from water cooling lines, the crash bar kit does not fit Twin-Cooled touring models. NOTE: For 15-23 Road Glide models, (except 18-22 FLTRXSE CVO Road Glide, 21-23 FLTRXS Road Glide Special and 22-23 FLTRXST Road Glide ST), installation requires new lower fairing support bracketry because the crash bar kit does not integrate with the original lower fairing support brackets. A singular fairing support bracket is recommended (not included), H-D PART #47200354 and any necessary hardware. NOTE: Front chin spoiler on some models may need to be removed or replaced with an oil cooler cover to install the Burly crash bar kit. NOTE: Kit includes a crash bar for the front and crash bars to protect the bags. NOTE: Front kit designed to work with Mid-controls only. Will not work with forward controls. NOTE: Exhaust systems that extend beyond the front frame down tubes by more than 1/ 2” may interfere with the installation of the crash bar. NOTE: Will not fit with front spoilers. NOTE: For models equipped with ABS, the ABS brake hoses located in front of the engine may need to be manipulated or re-routed to install the front crash bar. PART # DESCRIPTION 1731-0813 For 05-07 FLHT/FLHR/FLTR/FLHX, 14-17 H-D FL Trike, 06-17 Softail/Dyna REAPER FRONT MASTER CYLINDER COVER • Perfect way to add style to your hand controls • Aggressive design that mounts to standard H-D brake master cylinder • Textured black finish • Precision CNC machined billet aluminum • Sold each 0506-2625 0506-2624
13 DRAGSPECIALTIES.COM SEPTEMBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CHROME PART # BLACK PART # END RISE WIDTH CENTRE WIDTH PULLBACK FOR 24-26 FLTRX/FLTRXSTSE, 23-26 FLTRXSE 0601-7103 0601-7102 10” 307/16” 31/2” 6” 0601-7105 0601-7104 12” 307/16” 31/2” 6” 0601-7107 0601-7106 14” 307/16” 31/2” 6” 11/ 4” DOMINATOR HANDLEBARS • Provide a responsive handling position without sacrificing comfort or looks • Raked riser version • 31/ 2” on-centre risers • Tube diameter is 1.25”, stepped down to 1” for use with stock hand controls • Laser cut, welded, deburred and slotted for easy internal wiring • Designed for late-style Thottle-By-Wire applications • 12” and 14” bars require longer cables/lines/electrical for installation and will not fit models with integrated lower clamp 0601-7103 0601-7104 0601-7107
14 SEPTEMBER 2026 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS 11/ 4” GORILLA APE HANDLEBARS • 11/ 4” diameter tube tapering down to 1” to mate to your stock controls • 1” diameter clamping area • Drilled for internal wiring • Designed for late-style Thottle-By-Wire applications • May require longer cables and extension of handlebar wiring NOTE: Accept heated grips. PART # DESCRIPTION FOR 17-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHR/FLTR/FLHX (EXCEPT 23 FLHXSE/FLTRXSE), 09-25 H-D FL TRIKE, 16-24 SOFTAIL, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS, 20-23 ELW 0630-3544 Black machined 0630-3545 Black textured FOR 82-17 BIG TWIN (EXCEPT THROTTLE-BY-WIRE MODELS) AND 82-22 XL 0630-3542 Black machined 0630-3543 Black textured HAWK GRIPS • Ergonomic design for comfort that mounts seamlessly to stock controls • Precision CNC machined aluminum • Black machined or textured black finish • Rubber grip sleeves • Fit 1” diameter handlebars • Sold in pairs PART # DESCRIPTION 0630-3546 For 82-17 Big Twin (except throttle-by-wire models), 82-22 XL REAPER GRIPS • Ergonomic design for comfort that mounts seamlessly to stock controls • Precision CNC machined aluminum • Textured black finish • Rubber grip sleeves • Fit 1” diameter handlebars • Sold in pairs 0630-3542 0630-3545 0601-7108 0601-7111 CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTRE WIDTH PULLBACK FOR 25-26 SOFTAIL (EXCEPT FLFB/FXBR) 0601-7109 0601-7108 12” 383/16” 53/4” 93/4” 0601-7111 0601-7110 14” 383/16” 53/4” 93/4”
15 DRAGSPECIALTIES.COM SEPTEMBER 2026 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 1621-1254 For M-Eight Softail (Driver mount) 1621-1253 Male mount MX EVOLUTION MINI FLOORBOARDS • Mini floorboards are a direct, scaled-down version of the MX-Evovultion design • Inspired by the raw motocross spirit of the ‘70s and reimagined with modern precision • CNC machined and laser engraved with the Burly Brand logo • Maximum traction with grippy surface ensures confidence in all riding conditions • Square-shaped for a modern twist on the classic motocross aesthetic • Crafted from lightweight, high-quality aluminum alloy for optimal performance • Set screws provide secure traction for various riding styles • Sold in pairs PART # DESCRIPTION FOOTPEGS 1620-2827 Black machined PART # DESCRIPTION FOOTPEGS (CONT) 1620-2828 Textured black PART # DESCRIPTION TOE PEG 1620-2826 Black machined HAWK FOOTPEGS AND TOE PEG • Ergonomic design that mounts seamlessly to stock H-D clevis • Precision machined billet aluminum • Footpegs have male mount design • Rubber peg sleeves for added grip • Footpegs sold in pairs; toe peg sold each PART # DESCRIPTION 1620-2830 Reaper footpegs 1620-2829 Reaper toe peg REAPER FOOTPEGS AND TOE PEG • Ergonomic design that mounts seamlessly to stock H-D clevis • Precision machined billet aluminum • Footpegs have male mount design • Toe peg has rubber peg sleeve for added grip • Footpegs sold in pairs; toe peg sold each PART # DESCRIPTION 1603-0427 MX Evolution toe peg MX EVOLUTION TOE PEG • Square design pays homage to the iconic motocross aesthetic of the 1970s with a twist of modern ingenuity • Etched with the iconic Burly Brand logo for a distinctive look • Unwavering stability with set screws to provide a secure grip, making every movement on your journey confident and controlled • Crafted from lightweight, high-quality aluminum alloy for optimal performance • CNC machined to precision, ensuring durability and a sleek finish • Perfect match for MX Evolution Mini Floorboards • Sold each 1620-2829 1620-2830 1620-2828 1620-2827 1620-2826 1621-1254
RkJQdWJsaXNoZXIy NDI5NTY=