THE DRAG SPECIALTIES AUGUST 2023 dragspecialties.com CHROME DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-4218 8” Straight T-Bar 5” 23.5” 81/2” 111/2” 0601-4218 1” HANDLEBARS • Steel tubing in a variety of finishes • Wide variety of bends so you get that just-right fit and feel • Slotted and notched for Throttle-By-Wire applications • Accepts H-D OEM heated grips • Made in the U.S.A. CHROME GLOSS BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK - 0601-4278 10” T-Bar (curved risers) 12” 30” 9” 53/4” 0601-4245 - Bagger style 41/2” 341/2” 101/2” 121/2” - 0601-4248 Bagger style for Road King/Road Glide 51/2” 321/2” 101/2” 16” 11/4” BUFFALO BARS • The ultimate 11/4” diameter handlebar, designed for maximum comfort • 1” diameter in clamping area (except T-Bars) • Slotted and notched for Throttle-By-Wire options unless noted • Standard bars have 31/2” on-center knurling to prevent movement (except T-Bars) • Springer-style bars have 43/4” center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps • Optional 11/4” thick Buffalo risers are also available to complete the look • Optional handlebar clamps cover all of the center area that is sized down to one inch • Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section • See the 2023 Drag Specialties FatBookfor handlebar clamps and risers • Made in the U.S.A. NOTE: Not for use with stock risers and handlebar clamp/ gauge mount on 883C/1200C models. NOTE: Compatible with hydraulic clutch controls. 0601-4245 0601-4248 0601-4278 11/2” “BIG” BUFFALO BARS • Handlebars for the “biggest fattest” look • Feature a full 11/2” diameter in the clamping area (except T-Bars) • Custom bends for the ultimate in comfort • Slotted and notched for Throttle-By-Wire applications • Special risers required for all bars (except T-Bars); see pages 803-818 • Optional gauge mounts (for T-Bars) are available separately • Made in the U.S.A. NOTE: Accept heated grips and hydraulic clutch. GLOSS BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-4316 10” Chopper T-Bar 10” 311/2” 10” 41/2” 0601-4316
AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 2 VANCE & HINES More than just exhaust systems! The Vance & Hines VO2 air intake systems feature the Force™ Velocity Stack system and a high-capacity, deep-pleated air filter element to really give your intake system a power up. The laser-cut stamped steel covers add style and complete the custom look. PART # DESCRIPTION FOR 17-23 FLHT/FLHTK/FLHR/FLHX/FLTRX/FLTRU/FLTRK MODELS 1802-0408 Chrome 1802-0409 Matte black ceramic DRESSER DUALS HEADER SYSTEMS • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Catalysts repositioned downstream for rider comfort • Full-coverage heat shields • Accept 17-23 style mufflers (sold separately) • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for additional Vance & Hines Dresser duals header systems PART # DESCRIPTION 1800-2607 For 04-22 XL models (except 21-22 Sportster S/RH1250S and 22 Nightster/RH975) MINI GRENADES 2-INTO-2 EXHAUST SYSTEM • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • Black ceramic finish with CNC-machined billet end caps • 21/4” full-coverage heatshields • Mounting hardware and instructions included • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for additional Vance & Hines Mini Grenades 2-into-1 exhaust systems for XL 1802-0409 1802-0408
AUGUST 2023 THE DRAG SPECIALTIES 3 dragspecialties.com PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES 1010-3075 Chrome 1010-3079 Black cermic FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE MODELS 1010-3076 Chrome 1010-3080 Black ceramic FOR 18-23 SOFTAILS 1010-3075 Chrome 1010-3079 Black ceramic PART # DESCRIPTION FOR 01-17 TWIN CAM W/ DELPHI EFI, 99-06 TWIN CAM MODELS W/ CV CARB (EXCEPT 08-17 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE) 1010-3077 Chrome 1010-3081 Black ceramic FOR 91-22 XL (EXCEPT 21-22 SPORTSTER S/RH1250S AND 22 NIGHTSTER/ RH975) 1010-3078 Chrome 1010-3082 Black ceramic VO2 RADIANT V AIR INTAKES • Laser-cut Radiant V stamped steel cover • High-capacity, deep pleated washable air filter element • Force™ Velocity Stack for a strong increase in power • Available in chrome or black ceramic finish • Optional rain sock (PART #1011-4656, see the 2023 Drag Specialties FatBook) and replacement filters (PART #s 1011-4569 and 10114570, see the 2023 Drag Specialties FatBook) sold separately • Made in Santa Fe Springs NOTE: Exempt per CARB Executive Order (E.O.) #D-632-7 (07-22 EFI models only). PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES 1010-3063 Chrome 1010-3067 Brushed 1010-3071 Black ceramic FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE MODELS 1010-3064 Chrome 1010-3068 Brushed 1010-3072 Black ceramic FOR 18-23 SOFTAILS 1010-3063 Chrome 1010-3067 Brushed 1010-3071 Black ceramic PART # DESCRIPTION FOR 01-17 TWIN CAM W/ DELPHI EFI, 99-06 TWIN CAM MODELS W/ CV CARB (EXCEPT 08-17 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE) 1010-3065 Chrome 1010-3069 Brushed 1010-3073 Black ceramic FOR 91-22 XL MODELS (EXCEPT 21-22 SPORTSTER S/RH1250S AND 22 NIGHTSTER/RH975) 1010-3066 Chrome 1010-3070 Brushed 1010-3074 Black ceramic VO2 RADIANT III AIR INTAKES • Laser-cut Radiant III stamped steel cover • High-capacity, deep pleated washable air filter element • Force™ Velocity Stack for a strong increase in power • Available in Chrome, Brushed, or Black ceramic finish • Optional rain sock (PART #1011-4656, see the 2023 Drag Specialties FatBook) and replacement filters (PART #s 1011-4569 and 10114570, see the 2023 Drag Specialties FatBook) sold separately • Made in Santa Fe Springs NOTE: Exempt per CARB Executive Order (E.O.) #D-632-7 (07-22 EFI models only). 1010-3075 1010-3081 1010-3063 1010-3068 1010-3074
AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 4 PART # DESCRIPTION FOR 97-07 FLT/FLHT/FLHTC/FLHTCU/FLTR MODELS 0801-1454 Basket weave seat 0801-1455 Double diamond seat 0801-1456 Pleated seat TAILWHIP SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the full line of Tailwhip seats for Dresser/Touring PART # DESCRIPTION FOR 97-07 FLT/FLHT/FLHTC/FLHTCU/FLTR MODELS 0801-1457 Basket weave seat 0801-1458 Double diamond seat PART # DESCRIPTION FOR 97-07 FLT/FLHT/FLHTC/FLHTCU/FLTR MODELS (CONT) 0801-1459 Diamond seat 0801-1460 Pleated seat KICKFLIP SEATS • 6” of back support, 12” W seating area • Durable black Biker Tec cover • Molded Marathon Foam • Seat’s baseplate is 16-gauge powdercoated steel • Carpeted seat bottom • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the full line of Kickflip seats for Dresser/Touring 0801-1454 0801-1455 0801-1456 0801-1457 0801-1459 0801-1460
AUGUST 2023 THE DRAG SPECIALTIES 5 dragspecialties.com PART # DESCRIPTION FOR 18-23 FLSB/FXLRS/FXLRST MODELS 0801-1461 Track Pleat stitch seat TAILWHIP SEAT • Takes the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whippedup tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Driver seating 12.25” W; passenger seating 7” W • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. • See the 2023 Drag Specialties catalogue for the full line of Tailwhip seats for Softail PART # DESCRIPTION FOR 18-23 FXLR/FXLRS/FXLRST/FLSB 0801-1462 Track Pleat stich seat KICKFLIP SEAT • Top-grade, black vinyl cover • Baseplate is powdercoated steel and carpeted to protect painted surfaces • Featuring Le Pera’s Marathon Foam for maximum stability and comfort • Handcrafted with Le Pera’s iconic attention to detail • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the full line of Kickflip seats for Softail PART # DESCRIPTION FOR 18-20 FXBR/FXBRS 0802-1507 11.5” W driver; 8.5” W rear PART # DESCRIPTION FOR 18-23 FXFB/FXFBS 0802-1506 11.5” W driver; 7.5” W rear SQUAREBACK 2-UP SEAT • Delivers an updated style to a classic look for HD • A low-cut 11.5” driver bucket rises to meet the squaredoff passenger section, offering good back support • The generous width of the passenger section gives great support for two-up riding while maintaining a sporty look • Handsewn cover features a Tuck and Roll pattern in front with carbon fiber accents in the driver area and the passenger area • Made from marine-grade expanded vinyl 0802-1506 0802-1507 • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • Made in U.S.A.
AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 6 PART # DESCRIPTION FOR 18-23 FXBB/FXBBS/FXST 0802-1509 Black TRIPPER FASTBACK™ SEAT • Low-cut 11.5” wide driver bucket combined with a rising tail section provides good back support for the driver • Hand-sewn cover features a double-diamond pattern in front with a large single diamond pattern in the rear, and contrasting mixture of black and carbon fiber-styled vinyl for a true custom appearance • 5.5” wide passenger seating area features the Fastback™ traditional sleek and streamlined profile while still offering a reasonable degree of comfort for 2-up riding • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the entire line of Mustang Tripper Fastback seats for Softail PART # DESCRIPTION FOR 20-23 FXLRS 0802-1510 Black PART # DESCRIPTION FOR 18-21 FLSL 0802-1511 Black RUNAROUND SOLO SEAT • Get the sleekest look without sacrificing comfort with the Runaround • Mustang’s designers have engineered the lowest, leanest seat possible that drops the rider significantly lower compared to stock • 11-11 1/2” wide bucketed driver area provides excellent support in a low-profile, sporty package • Handsewn cover made from marine-grade expanded vinyl • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use 0802-1510 0802-1511 • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the entire line of Mustang Runaround Solo seats for Softail PART # DESCRIPTION FOR 18-23 FLFB/FLFBS 0802-1508 Black EXTREME FASTBACK™ SEAT • A low-cut driver bucket is paired with a tall tail section for incredible back support, while giving a mean racingcowl look, uniquely styled for the lines of the Fat Boy • Hand-sewn cover features a double-diamond pattern in front with a perforated-look vinyl on the 7” wide rear • 11.5” wide bucketed rider area provides excellent support in a low-profile, sporty package, with a 7” wide rear section • Handsewn cover with double-diamond and perforated accents made from marine-grade expanded vinyl • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • Made in U.S.A.
AUGUST 2023 THE DRAG SPECIALTIES 7 dragspecialties.com PART # DESCRIPTION 1202-0183 For all 18-23 Softail models UPPER BELT GUARD • Made of steel with black powder coating finish • Stainless steel hardware included for easy installation • Made in the U.S.A. PART # DESCRIPTION FOR 17-22 FLHT/FLHX/FLHR/FLTR AND 18-22 SOFTAIL MODELS 0904-0096 Black w/ black exhaust 0904-0097 Black w/ brushed stainless exhaust 0904-0098 Polished w/ brushed stainless exhaust TORNADO TURBO KIT • Bolt on 40-50% more power to your stock 107", 114" or 117" M8 motors • Trask compressor and turbine housings with Garrett internals • Stainless steel pipe kit is mandrel bent and TIG welded; includes wastegate • Brushed stainless or black exhaust with race-inspired stainless steel heat shields • Trask plenum with integrated blow-off valve • Includes all install components: larger injectors, spark plugs, boost gauge with mount, oil feed, drain lines, custom cam cover, Thundermax tune files and all necessary hardware and gaskets • Made in the U.S.A. NOTE: Requires use of Thundermax ECM PART #s 1020-2664 or 1020-2795 (sold separately). NOTE: Does not fit on Twin Cooled models. NOTE: Intended for offroad use only and recommended for experienced riders.
AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 8 FEULING Quality engineered performance parts for your V twin engine! Feuling now offers HP+ and Race Series hydraulic cam chain tensioner conversion kits for 99-06 engines that upgrade to the 07-17 hydraulic cam chain drive system. The complete kits include everything needed to freshen up your Twin Cam. PART # DESCRIPTION FOR CONVERSION STYLE CAMSHAFTS 0925-15051 Conversion Camshaft Hydraulic Tensioner Kit. Fits: 99-00 Twin Cam and 01 Bagger Magneti Marelli equipped ignition system engines requiring the timing tab on the rear camshaft sprocket for the cam sensor 0925-15061 Conversion Camshaft Hydraulic Tensioner Kit. Fits: 01-06 Twin Cam Delphi equipped ignition system engines w/o cam sensor FOR 99-06 STYLE CAMSHAFTS 0925-15072 Conversion camplate Hydraulic Tensioner Kit. Fits: 99-00 Twin Cam and 01 Bagger Magneti Marelli equipped ignition system engines requiring the timing tab on the rear camshaft sprocket for the cam sensor with factory 00-06 style splined chain drive camshafts 0925-15082 Conversion camplate Hydraulic Tensioner Kit. Fits: 01-06 Twin Cam Delphi equipped ignition system engines w/o cam sensor with factory style 00-06 splined chain drive camshafts 1 Requires separate purchase of conversion camshafts PART #s 0925-0671, 0925-0606, 0925-0607, 0925-0608, 0925-0672. 2 Will NOT work on keyway camshafts. RACE SERIES HYDRAULIC CAM CHAIN TENSIONER CONVERSION KITS • Kits include the needed components to upgrade early 99-06 style mechanical spring tensioner cam chain drive systems to the late 07-17 hydraulic cam chain drive system • Includes a Feuling Race Series billet oil pump, High Flow camplate, Race Series full-travel lifters, Feuling’s billet hydraulic tensioner housings, tensioner pads, cam chains, sprockets, sprocket alignment spacers, Timken®/Feuling bearings, needed gaskets, O-rings, ARP® cam, crank hardware, Loctite® and moly lube • Made in the U.S.A. NOTE: Rocker box gasket kit included so the factory one-piece pushrods can be reused. 0925-1508 0925-1505
AUGUST 2023 THE DRAG SPECIALTIES 9 dragspecialties.com PART # DESCRIPTION FOR CONVERSION STYLE CAMSHAFTS 0925-15011 Conversion Camshaft Hydraulic Tensioner Kit. Fits: 99-00 Twin Cam and 01 Bagger Magneti Marelli equipped ignition system engines requiring the timing tab on the rear camshaft sprocket for the cam sensor 0925-15021 Conversion Camshaft Hydraulic Tensioner Kit. Fits: 01-06 Twin Cam Delphi equipped ignition system engines w/o cam sensor FOR 99-06 STYLE CAMSHAFTS 0925-15032 Conversion camplate Hydraulic Tensioner Kit. Fits: 99-00 Twin Cam and 01 Bagger Magneti Marelli equipped ignition system engines requiring the timing tab on the rear camshaft sprocket for the cam sensor with factory 00-06 style splined chain drive camshafts 0925-15042 Conversion camplate Hydraulic Tensioner Kit. Fits: 01-06 Twin Cam Delphi equipped ignition system engines w/o cam sensor with factory style 00-06 splined chain drive camshafts 1 Requires separate purchase of conversion camshafts PART #s 0925-0671, 0925-0606, 0925-0607, 0925-0608, 0925-0672. 2 Will NOT work on keyway camshafts. HP+ CONVERSION CAMSHAFT HYDRAULIC CAM CHAIN TENSIONER KITS • Kits includes the needed components to upgrade early 9906 style mechanical spring tensioner cam chain drive systems to the late 07-17 hydraulic cam chain drive system • Includes a Feuling HP+ billet oil pump, High Flow camplate, HP+ lifters, Feuling’s billet hydraulic tensioner housings, tensioner pads, cam chains, sprockets, sprocket alignment spacers, Timken®/Feuling bearings, needed gaskets, O-rings, ARP® cam, crank hardware, Loctite® and moly lube • Made in the U.S.A. NOTE: Rocker box gasket kit included so the factory one-piece pushrods can be reused. PART # DESCRIPTION 0932-0300 For all 07-17 Twin Cam and 06 Dyna OE+ OILING SYSTEM/CAMCHEST FRESHEN UP KIT FOR TWIN CAM • Freshen up camchest and oiling system on late model Twin Cam engines • Kit uses existing camshafts or allows purchase of preferred cam selection while upgrading camchest with a new OE+ high volume oil pump, OE+ camplate, HP+ lifters, billet tensioner housings, tensioner pads, cam/crank sprockets, sprocket alignment spacers, cam chains, cam bearings, hardware, gaskets and O-rings • Made in the U.S.A. NOTE: Designed for use with 07-17 chain drive camshafts. See Feuling camshaft selection: PART #0928-0427 (525 Grind), PART #0925-0673 (543 Grind), PART #0925-0430 (574 Grind), PART #0925-0677 (594 Grind) and PART #0925-0433 (630 Grind). 0925-1501 PART # DESCRIPTION FOR 17-23 M-EIGHT 0926-3434 -0.050” installed height 0926-3435 +0.050” installed height TITANIUM VALVE SPRING RETAINER KITS • PART #0926-3434 decreases installed valve spring height to help reduce the amount of shims needed to properly setup valve springs for cam lift (fits stock M-Eight valve springs and PART #0926-2973) • PART #0926-3435 increases valve spring installed height without the need for removing/cutting valve spring seat pockets/depths (fits M-Eight OEM, SE valve springs and PART #s 0926-2973 and #0926-3138) • Made in the U.S.A. PART # DESCRIPTION 0921-0938 For 17-23 M-Eight engines and 00-17 Twin Cam B engines CRANKSHAFT BEARING RACE KIT • Pinion race is undersized to allow service and remachining of pinion shaft when prior damage occurred such as race spinning on shaft • Includes right and left side crankshaft races with the left side thrust washers • Press-on races have a precision-ground outer diameter finish and are designed to be true to size, producing the correct OD after proper press on installation • Made in the U.S.A.
AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 10 PART # DESCRIPTION 0930-0240 For all 17-23 M-Eight ROCKER SHAFT SHIMS • Quiet your engine by tightening the rocker arm to cylinder head end play clearance • Feuling recommends an ideal side clearance of 0.0035” - 0.005” for optimum rocker arm oil psi and noise reduction • M-Eight cylinder heads also have excessive wear on the rocker arm standoff thrusting surfaces; when the hardened shim is placed on the thrusting side it will assist in reduction of further wear and damage to cylinder head • Includes six 0.003” thick shims, six 0.005” thick shims and six 0.0010” thick shims • Made in the U.S.A. NOTE: These shims should be installed by a professional; one who can make correct end play measurements and can install and tighten rocker shaft nuts/ bolts without damaging shims. PART # DESCRIPTION FOR 91-03 XL 2401-1615 External engine fastener kit (includes right side engine cover, center engine/choke cable mount, lifter blocks, rocker covers, front engine upper mount nut, front engine upper mount nut, case bolts, timing cover, 1/4” washers, 3/8” HD washers, 5/16” washers and 3/8” lock washers) 2401-1616 External primary fastener kit (includes primary cover, clutch cover and 1/4” stainless steel washers) 12-POINT ENGINE FASTENER KITS • Top engine builders demand quality fasteners! Secure your engine with complete confidence • Quality 12-point heat-treated stainless steel • Feature precision-rolled threads for optimum engagement, to prevent galling and promote more consistent torque loading • Wide underhead flange design provides even load distribution for optimum sealing of surfaces, preventing leaks • Tensile strength rated @ 170,000 psi; superior and stronger than OEM and stronger than grade 8 fasteners • Manufactured by ARP® to Feuling’s® exact specifications • All kits include moly assembly lubricant for installation • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the entire line of Feuling Engine Fastener kits PART # DESCRIPTION 2401-1617 For 91-03 XL DRESS UP CHASSIS/TRIM FASTENER KIT • Top engine builders demand quality fasteners! Secure your engine with complete confidence • Quality 12-point hardened stainless steel bolts with a polished “SHOW” corrosion-resistant finish • Feature precision-rolled threads for optimum engagement, to prevent galling and promote more consistent torque loading • Wide underhead flange design provides even load distribution for optimum sealing of surfaces – preventing leaks • Eliminates thread problems associated with chromed hardware • Tensile strength rated @ 170,000 psi; superior and stronger than OEM and stronger than grade 8 fasteners • Manufactured by ARP® to Feuling’s® exact specifications • Kit includes front caliper mount, fork clamps, rear fender struts, rear brake rotor, rear brake master cylinder, rear belt guard, voltage regulator mount, axle nut, 1/4” washers, 5/16” washers, 3/8” washers, 1/2” washers and moly assembly lubricant for installation • Made in the U.S.A. 2401-1616 2401-1615 PART # DESCRIPTION 0925-1509 465B PART # DESCRIPTION 0925-1510 485 GRIND OPEN CLOSE DURATION @ .050” VALVE LIFT LIFT TDC LOBE CENTERLINE 465B Intake 10° 20° 210° 0,464” 0,126” 95° Exhaust 46° 10° 236° 0,460” 0,122” 108° 485 Intake 7,5° 29,5° 217° 0,485” 0,116” 101° Exhaust 52,5° 14,5° 247° 0,485” 0,145” 109° CAMS FOR 17-23 M-EIGHT 465B • Bolt-in chain drive cam for 107”-117” engines • Use with stock valve springs • For heavy and middle weight bikes • Great low to mid rpm torque (1200-5600 rpm) 485 • Highest lift bolt-in chain drive cam available for use with stock valve springs • Bolt-in cam for 107” engines and larger • Excellent low to mid rpm power (1500-5600+ rpm) 0925-1509
AUGUST 2023 THE DRAG SPECIALTIES 11 dragspecialties.com OVERDRIVE 6-SPEED GEAR SET KITS • Includes a black trap door (unless noted), all gears, mainshaft, countershaft, shifter drum, detent components, bearings, snap rings, gaskets and hardware • Significantly smoother shifting than stock due to a roller detent shift drum with reduced inertia and gear dogteeth with lead-in ramping • Gear ratio of 2.94 and .86 6th gear available • Available in black or polished • Fits into stock and most aftermarket 5-speed transmission cases • Made in the U.S.A. NOTE: Exhaust bracket may require modification when using these kits. PART # DESCRIPTION FOR 01-06 FLHT/FLHR/FLHX/FLTR MODELS 1103-0054 Gear set w/ 3.24 first/.86 sixth FOR 99-00 FLT/FLHT/FLHR/FLTR AND 99-00 FXR MODELS 1103-0056 Gear set w/ 3.24 first/.86 sixth FOR 90-97 FLT/FLHT/FLHR/FLTR AND 90-94 FXR MODELS 1103-0052 Gear set w/ 3.24 first/.86 sixth PART # DESCRIPTION FOR 00-06 FXST/FXLT, 01-05 FXD/FXDWG MODELS 1103-0055 Gear set w/ 3.24 first/.86 sixth FOR 90-97 FXST/FLST, 91-97 FXD/FXDWG 1103-0053 Gear set w/ 3.24 first/.86 sixth RESULTANT RPM CHANGE BETWEEN STANDARD FIFTH GEAR AND BAKER SIXTH GEAR (FIFTH GEAR RATIO IN A 5-SPEED IS THE SAME AS FIFTH GEAR IN THE 6-SPEED OVERDRIVE (1:1) AND BAKER DD6) MPH RPM IN 5TH GEAR (1:1 RATIO) RPM IN 6TH GEAR (.86:1 RATIO) RPM REDUCTION (.86:1 RATIO) RPM IN 6TH (DD6) RPM REDUCTION (DD6) 65 2945 2533 412 2528 417 70 3172 2728 444 2723 440 75 3398 2923 475 2917 481 80 3625 3118 507 3112 513 DIRECT DRIVE 6-SPEED GEAR SET KITS • Fits into existing 5-speed cases; lowers the rpm at cruising speeds • Includes a black trap door, 6-speed gear set (3.24:1 1st gear/.86:1 6th gear), 28-tooth motor sprocket, longer primary chain, chain adjusting shoe, fixed spindle-shift drum and anti-overshift ratchet shift pawl assembly • All gears are full-width Baker ground gears; 4th, 5th and 6th gears are helical for silent operation • Includes easy-to-follow instructions • Made in the U.S.A. RESULTANT RPM CHANGE BETWEEN STANDARD FIFTH GEAR AND BAKER SIXTH GEAR (FIFTH GEAR RATIO IN A 5-SPEED IS THE SAME AS FIFTH GEAR IN THE 6-SPEED OVERDRIVE (1:1)) MPH RPM IN FIFTH GEAR (1:1 RATIO) RPM IN SIXTH GEAR (.86:1 RATIO) RPM REDUCTION (.86:1 RATIO) 65 2945 2533 412 70 3172 2728 444 75 3398 2923 475 80 3625 3118 507 PART # DESCRIPTION FOR 02-06 FLHT/FLHR/FLHX/FLTR MODELS 1103-0060 Gear set w/ 2.94 first/.86 sixth FOR 98-00 FLHT/FLHR/FLHX/FLTR MODELS 1103-00611 Gear set w/ 2.94 first/.86 sixth 1103-0062 Gear set w/ 2.94 first/.86 sixth PART # DESCRIPTION FOR 98-99 FXST/FLST, 98 FXD/FXDWG, 99-00 FXR MODELS 1103-0059 Gear set w/ 2.94 first/.86 sixth FOR 00-06 FXST/FXLT MODELS, 01-05 FXD/FXDWG MODELS 1103-0058 Gear set w/ 2.94 first/.86 sixth FOR 90-92 FLT/F LHT, 90-94 FXR, 90-97 FXST/F LST, 91-97 FXD/F XDWG MODELS 1103-0057 Gear set w/ 2.94 first/.86 sixth 1 Polished trap door. 1103-0052 1103-0061
AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 12 PART # DESCRIPTION WIDTH END RISE CENTER WIDTH PULLBACK 0601-6247 Low bend 29.5” 2.5” 5.2” 1.75” 0601-6248 Mid bend 29.5” 3.5” 5.2” 2” 1” HANDLEBARS • Aggressive profile motocross-style bars • Brushed stainlesss steel finish with a laser-etched SlyFox logo • Slotted for internal wiring • 31/2” on-center knurling • Fits any riser with a 1” clamping area • Made in the U.S.A. HANDLEBAR CABLE/LINE INSTALL KITS • Include extended brake line, extended clutch cable and all necessary wiring extensions, as required • Come in black vinyl or braided stainless steel • Brake lines feature PTFE inner liner and heavy-duty stainless steel outer braid NOTE: Kits are based on using 2” risers with Ape hanger-style handlebars. STAINLESS STEEL PART # BLACK PART # DESCRIPTION 0662-1159 0662-1157 For 13” Ape hanger bar 0662-1154 0662-1151 For 14” Gorilla Ape hanger bar 0662-1160 0662-1158 For 15” Ape hanger bar STAINLESS STEEL PART # BLACK PART # DESCRIPTION 0662-1155 0662-1152 For 16” Gorilla Ape hanger bar 0662-1156 0662-1153 For 18” Gorilla Ape hanger bar FOR 21-23 FLHT/FLHTK/FLHR/FLHX/FLHXSE/FLHXST/FLTRK/FLTRX/FLTRXS/FLTRXST FOR HANDLEBARS W/ 1” DIA. CLAMPING AREA PART # DESCRIPTION NO PULLBACK 0602-1407 6” 0602-1408 8” 0602-1409 10” PART # DESCRIPTION WITH 2” PULLBACK 0602-1410 6” 0602-1411 8” 0602-1412 10” PERFORMANCE RISER KITS • Beautifully machined risers not only look great but provide strength and comfort for your bike • Straight risers are available in 6”, 8” and 10” heights • Pullback risers are available in 6”, 8” and 10” heights and have 2” of pullback • Available with a 1” or 1.25” clamping area for use with 1” or 1.25” handlebars • Machined pockets not only reduce weight but add a distinct look • Top clamp accommodates the use of LA Choppers specific gauge mounts, see DASHES & GAUGES section • Made in the U.S.A. PART # DESCRIPTION 0602-1436 FOR 83-22 FLT/FLHT/FLHR/FLHX/ FLTR H-D FL TRIKES AND 18-22 SOFTAILS) POLYURETHANE RISER BUSHING KIT • High quality polyurethane and stainless steel hardware • Eliminates the stock sloppy handlebar feel • Reduces vibrations over solid riser bushings • Quick and easy to install • Sold in pairs 0602-1418 0602-1407 0662-1152 0662-1160 0601-6247 0601-6248 FOR HANDLEBARS W/ 1 1/4” DIA. CLAMPING AREA PART # DESCRIPTION NO PULLBACK 0602-1413 6” 0602-1414 8” 0602-1415 10” PART # DESCRIPTION WITH 2” PULLBACK 0602-1416 6” 0602-1417 8” 0602-1418 10”
AUGUST 2023 THE DRAG SPECIALTIES 13 dragspecialties.com PART # DESCRIPTION 1710-4322 For 09-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK models w/ Agitator wheels (except CVO) 1710-4321 For 06-17 Dyna models with factory cast front wheels equipped w/ spoke mounted rotors 11.8” FRONT JAGGED FLOATING ROTORS • High-performance floating brake rotors designed to enhance braking performance and style of factory wheels • 420 Stainless construction, drilled for optimum performance and heat dispersion • Accepts factory style brake rotor hardware • Sold each PART # DESCRIPTION 1701-0731 Left PART # DESCRIPTION 1701-0732 Right FOUR-PISTON RADIAL MOUNT FRONT BRAKE CALIPERS • CNC-machined from billet aluminum • Brake calipers are engineered for form and function, 3D sculptured design helps facilitate cooling incurred while braking • Cooling fins are machined into the inner caliper halves help disperse heat • Extremely rigid under stress ensuring precise and consistent braking performance • Designed to fit Arlen Ness Method Fork Legs with radial caliper brackets (PART #0403-0166) or fork legs with radial brake caliper brackets that have 100mm bolt spacing PART # DESCRIPTION FOR 18-23 SOFTAILS 1731-0762 Chrome PART # DESCRIPTION FOR 18-23 SOFTAILS (CONT) 1731-0763 Black; repl. OEM #41700460 REAR BRAKE MASTER CYLINDERS • Complete rear master cylinder assembly • Fully assembled for easy installation PART # LENGTH FOR 18-23 FLHC/FLHCS/FLDE/FLDE/FLSL/FXST/FXBB/FXBBS/FXBR/FXBRS/FXLR, 49MM 0404-0647 23.75”; repl. OEM #45500376 0404-0648 25.75” OEM-STYLE FORK TUBES • Highly durable hard chrome finish • Offer less drag and improved seal wear • Accept all OEM components • Sold in pairs • See page the 2023 Drag Specialties FatBook for additional Drag Specialties OEM-style fork tubes 1710-4322 • Compatible with ABS or non-ABS applications • Designed for 11.8” diameter brake rotors • Includes brake pads, bleeder screw and banjo bolt • Black anodized finish 0404-0647 1731-0763 1731-0762 1701-0732
AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 14 CIRO Give your late-model FLHX, FLTRX or FLHRXS a dramatic makeover with the new Latitude Lightstrike™ kit. The LED rear run/turn/brake light in the kit is fully customizable with animated light functions and strobe light feature to make it stand out in traffic. And the new license plate mount provided in the kit has hidden fasteners to complete a tidy, clean look with real visual impact, even when parked. PART # DESCRIPTION FOR 14-23 FLHX/FLTRX/FLHRXS MODELS 2010-1499 Chrome w/ red lens 2010-1500 Black w/ red lens PART # DESCRIPTION FOR 14-23 FLHX/FLTRX/FLHRXS MODELS (CONT) 2010-1497 Chrome w/ light smoked lens 2010-1498 Black w/ light smoked lens LATITUDE LIGHTSTRIKE™ TAILLIGHTS WITH LICENSE PLATE HOLDER • Replaces the entire OEM lighting assembly for a complete rear end transformation • Features brilliant LIGHTSTRIKE™ LED run, turn and brake light that is fully customizable, with a variety of animated functions and strobe effects that stand out in traffic • Choose between 12 different power-on animations, 10 turn signal animations with strobe options, 3 brake animations and 5 brake burst modes • Can change the turn signal between red and amber • Easy plug-n-play installation • License plate mount has hidden fasteners for an extra-clean look • Available in chrome or black with red or light smoked lens NOTE: DOT compliant. 2010-1497 2010-1500 PART # DESCRIPTION 2030-2288 Black 2030-2289 Chrome RADIUS LED LICENSE PLATE FRAMES • Low-profile, sleek, curved design billet aluminum construction • Three banks of auxiliary red LEDs and tag illumination • 20 red LEDs are flush mounted on either side, with a row of 50 dual intensity red LEDs flush mounted across the bottom • 6 white LEDs are embedded along the inside edge for tag illumination • All wires exit a single location on the back side of the frame, the 43” wires allow length for routing and connecting wires • Measures 73/16” L x 41/4” W • Works with standard 4” x 7” motorcycle tags • Compatible with 12VDC systems with a negative ground • Mounting hardware included PART # DESCRIPTION 2020-2157 For OEM bullet-style turn signals GENESIS® 4 SOLID AMBER 1157 BULLET FRONT TURN SIGNAL INSERT • Dual intensity amber LEDs provide a bright solid amber running light and full contrast amber turn signal flash • Each Genesis® 4 front turn signal has a black circuit board with 48 dual intensity amber LEDs and 1157 pigtail bulb base • Plug and play replacement for OEM front turn signal bulbs on US and Canada model Harley-Davidson motorcycles with bullet turn signal housing • Must be installed with ProBEAM® bullet turn signal lenses (sold separately) 2030-2289 2030-2288 PART # DESCRIPTION 2020-2158 For OEM bullet-style turn signals 2020-2159 For OEM flat-style turn signals GENESIS® 4 SOLID RED 1156 REAR TURN SIGNAL INSERTS • Red LEDs provide a bright red turn signal flash • Each Genesis® 4 rear turn signal has a black circuit board with 48 red LEDs and 1156 pigtail bulb base • Plug and play replacement for OEM rear turn signal bulbs on Harley-Davidson motorcycles with bullet, flat or old bullet (2 screw) turn signal housing • Must be installed with ProBEAM® bullet turn signal lenses (sold separately) 2020-2158 2020-2159
AUGUST 2023 THE DRAG SPECIALTIES 15 dragspecialties.com PART # DESCRIPTION FOR 22-23 FXLRS 2210-0645 Black 2210-0646 Chrome SOFTAIL GAUGE RELOCATION KITS • 6061 billet aluminum bezel • Carbon fiber housing • Comes with two 8-32 x 7/16” hex drive flathead screws and rubber grommet • Accepts stock instrument cluster • Work with OG Risers and Holeshot Risers, see the 2023 Drag Specialties FatBook • Mounting brackets (PART #s 2210-0633 or 2210-0634) sold separately, see the 2023 Drag Specialties FatBook • Made in the U.S.A. PART # DESCRIPTION FOR 39MM FORKS 2020-2142 Gloss black anodized 2020-2143 Chrome plated PART # DESCRIPTION FOR 41MM FORKS 2020-2144 Gloss black anodized 2020-2145 Chrome plated PART # DESCRIPTION FOR 49MM FORKS 2020-2146 Gloss black anodized 2020-2147 Chrome plated RAT EYE FORK-MOUNT TURN SIGNALS • Two-piece claw clamp separates and mounts without having to drop the fork tubes • Super-bright single-function 18mm amber 12V LED lights • CNC-machined from billet aluminum • Small aluminum minimalist bodies give the lights a low-profile look • Includes plenty of wire for mounting above the lower triple tree • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 3510-0177 Tool roll TOOL ROLL • 1680 D ballistic nylon exterior • High-vis orange interior lining • 6-Tool Pockets • 1 Zipper Pocket, 6 x 9” • Measures 161/2” L x 91/2” W (open) • Can attach to Thrashin handlebar bags PART #s 3510-0102 and 3510-0103 (sold separately) • Does not include tools PART # DESCRIPTION 4401-0274 6” rubber 4401-0275 7” aluminum with carbon insert AM/FM STUBBY ANTENNAS • Comes in rubber or aluminum with carbon fiber insert • Fits any HD models with existing audio antenna • 100% plug-n-play 4401-0274 4401-0275 2020-2143 2020-2142 2210-0645 2210-0646
AUGUST 2023 THE DRAG SPECIALTIES 16 PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK MODELS 1800-2627 Black chrome B4 2-INTO-1 EXHAUST SYSTEM • Features equal-length headers • Stepped 13/4” to 17/8” headpipes with heat shields • Utilizes an advanced inner collector for maximum performance • 4” straight can muffler with matching billet end cap • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for all Bassani B4 2-into-1 exhaust systems PART # DESCRIPTION 1020-3989 For 01-13 models w/ Delphi EFI (J1850) and 01-17 V-Rod (4-pin connector) POWER VISION 4* • Flash tunes to your ECU – no setup required, just create an account, select your tune, flash and enjoy the ultimate ride • Access to a vast database of pre-loaded tunes for different configurations • Easily download and manage pre-loaded and custom tunes • Record real-time engine data and display in WinPEP 8 Data Center • Optimized for remote tuning so you can easily ride, record and share data logs and tunes • Read, review, clear and share diagnostic trouble codes (DTCs) with built-in descriptions • Supports licensing additional vehicles • Return to stock at any time, your original factory tune is safely backed up on the cloud and on your phone • See Dynojet website: http://www.dynojet.com/powervision-tune-license-programs. aspx for information about purchasing additional Power Vision tune licenses • Made in the U.S.A. NOTE: 49-state emissions compliant. MANUFACTURER’S NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes. PART # DESCRIPTION 1020-4014 For 95-01 FLHT/FLHR/FLTR Fi2000R PLUG-IN FUEL PROCESSOR* • Proven Fi2000R comes with leads that snap directly into the bike’s injector bodies • Standard open-loop design can use exhaust systems that do or do not have O2 sensor bungs • More advanced tuning for modified bikes • Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit • Full range of fuel adjustment (0-10 settings) across all rpm ranges • Three easily identifiable lights: green – Fi2000R is adding more fuel to the air/ fuel ratio approx. 14:1; green and yellow lights – these lights will be on in unison when throttle is open more quickly and air/ fuel mixture is approx. 12.5:1; red – light comes on and stays on as long as the Fi2000R follows the fuel curve while adjusting to approx. 12.8:1 air/ fuel ratio, which is where the engine will produce its best full-throttle power • Step-by-step instructions • Improves rideability by smoothing out the powerband and giving the bike more throttle response • Corrects lean air/ fuel mixture problems; eliminates overheating, hesitation on acceleration or an uneven cruising rpm • Waterproof circuit board • No fuel map adjustments or computer downloads required
RkJQdWJsaXNoZXIy NDI5NTY=