FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 10 PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 96-23 FLHT/FLHX/FLHTCUTG/FLHXXX MODELS 0601-6284 10” Bagger 10” 331/ 2” 12” 51/ 4” 0601-6285 12” Bagger 12” 331/ 2” 12” 51/ 4” 0601-6286 14” Bagger 14” 331/ 2” 12” 51/ 4” 11/ 4” BRONZE TWIN PEAKS TOURING HANDLEBARS • Handlebars with an emphasis on touring comfort • More parallel wrist angles for a perfect pullback angle and stress-free riding • Flowing bends on the uprights designed specifically for batwing fairing bikes • 31/ 2” on-center knurling, 1” clamping area • Drilled for internal wiring • Work with hydraulic clutches • Can be used on cable and TBW (Throttle-By-Wire) applications • Eye-catching bronze finish • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. PART # DESCRIPTION 0602-1450 For 12-23 Chieftain/Roadmaster 2” PIVOTING BAR RISER KIT • Bring the stock handlebar location back toward the rider by approximately 2” • These risers are a great option for riders who want to get more upright in the seat and/or get weight off of their arms, neck and shoulders • Work with stock cables and brake line • Riser clamping positioning will be limited by the large OEM fairing assembly • Riser clamping portion is 11/ 4” in diameter • Accept handlebars with 11/ 4” clamping area • Polished silver finish • Made in the U.S.A. NOTE: Will not work on 17-23 models with Ride Command. US Patent #6,920,806. PART # DESCRIPTION 0602-1455 For 15-24 Scout models 2” PIVOTING BAR RISER KIT • 2” fully adjustable bar riser allows you to dial in the perfect position for your build and riding style • Designed to allow the Indian speedometer assembly to mount directly into the top side of the risers • Comes with replacement caps to clamp the stem of the riser into the stock Indian bar clamp • Also comes with four longer bolts to allow the speedometer assembly to securely attach to the top side of the risers • Works with stock bars • Machined from solid aircraft-grade 6061-T6 billet aluminum • Black anodized finish • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION 0602-1456 For 21-23 RA1250/1250S 11/ 2” BARBACK HANDLEBAR RISER KIT • Designed specifically for the Harley Davidson Pan America • 19/ 16” of diagonal rise; moves the bar approx. 13/ 8” up and approx. 3/ 4” back from the stock position • Machined from 6061-T6 aircraft grade billet aluminum • Engraved Rox logo for a clean and understated “factory” look • Includes all mounting hardware and instructions • Will work with OEM cables and lines • Black anodized (matte finish) • Made in the U.S.A. 0601-6285 PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-23 FLTRX/S/ST, FLTRU/FLTRK MODELS 0601-6281 10” 34” 9” 6” 0601-6282 13” 34” 9” 6” 0601-6283 16” 34” 9” 6” 11/ 4” BRONZE HEFTY TWIN PEAKS HANDLEBARS • Features 11/ 4” diameter in the clamping area • Works with the OEM riser and clamps; has the correct wire exit location • Bars include new black control clamps to replace the oversize OEM clamps • No need to remove the stock pin in the OEM mount clamps; bar still has more than 35° of adjustment • Knurled clamping area • Will work with hydraulic clutches • Eye-catching bronze finish • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 0601-6281
RkJQdWJsaXNoZXIy NDI5NTY=